Modern Machine Shop

AUGUST 15, 2024

Source: Lexair Inc. all photos) Lexair is featuring four of its products: the Mini Rhinobar bar feeder, Gen 3 Collet Closers, the Unload Pro unloader and a Breuning IRCO Profimat magazine barfeeder. It employs rapid unloading technology to create a continuous flow of material, which can enable lathes to optimize cycle times.

Cycle time 52

Cycle time Sourcing 52

i4.0 today

MAY 9, 2024

Simulating various driving scenarios To address these additional requirements in the EOL and PTI process, Dürr and Rohde & Schwarz initiated a joint project incorporating Dürr’s patented x-road curve multi-function roll test stand, Rohde & Schwarz’ new RadEsT radar target simulator and the open-source simulation platform CARLA.

Function 52

Function Cycle time Sourcing Automation 52

Dinesh Mishra

JANUARY 22, 2025

Recent advancements transforming efficiency and precision include: High-Speed Machining : CNC machines with HSM capabilities deliver faster cutting speeds and tighter tolerances, significantly reducing cycle times. Customer-Centric Approach : Collaborating with customers on product development and providing robust after-sales support.

Industry 4.0 52

Industry 4.0 Industry 4.0 Supply Chain Smart manufacturing 52

i4.0 today

APRIL 24, 2023

Additionally, as a result of the IntElect’s parallel movements, cycle times were on average 15 percent faster. D&G’s skilled operative and tool setter Graeme has observed 20 second cycle times reduce to 12.5 D&G’s skilled operative and tool setter Graeme has observed 20 second cycle times reduce to 12.5

Cycle time 52

Cycle time Benchmarking Automotive Aerospace 52

i4.0 today

SEPTEMBER 4, 2023

As well as ensuring components are perfectly positioned to receive the second shot, this higher precision results in a far shorter cycle times compared to earlier multi-component moulding concept. Today Magazine. Automation. Machine) is our in-house robot series. For more information, visit www.sumitomo-shi-demag.eu.

Automation 52

Automation Consumer Goods Industry 4.0 Industry 4.0 52

i4.0 today

JANUARY 19, 2023

Knowing that highly dynamic movements can help to shorten the cycle time and increase component quality, Nigel Flowers, Managing Director of Sumitomo (SHI) Demag UK examines the drive options and their respective performance, operational flexibility, environmental credentials and machinery longevity. Today Magazine.

Cycle time 52

Cycle time Benchmarking Sourcing Industry 4.0 52

MEM

FEBRUARY 6, 2023

Delivering the highest quality, using regionally-sourced ingredients and where possible fully-recyclable eco-packaging to reduce waste are all equal factors that underpin this discerning ethical sandwich maker. Byron attributes this quantum leap to its distinct and credible eco-brand messaging.

Sourcing 52

Sourcing Cycle time Fit Manufacturing 52

i4.0 today

JULY 23, 2024

FANUC has long championed the use of its industrial robotic solutions as a way for aerospace manufacturers to boost production rates, streamline their operations and cut cycle times. Today Magazine. The specific solution that Airbus was looking for did not exist anywhere in the market,” explains Oliver.

Aerospace 52

Aerospace Robotics Robotics Manufacturing 52

i4.0 today

JUNE 17, 2024

Avoid circling the downtime drain For most processors, downtime is the single largest source of lost production time. It really does depend on cycle time, process demand (materials processed, quality of tooling, tool weights, number of functions utilised etc.,) Using machine data such as loads, cycle times etc.,

Overall Equipment Effectiveness (OEE) 52

Overall Equipment Effectiveness (OEE) Cycle time Function Process control 52

MEM

MAY 25, 2023

Moreover, as most components are made from oil-based virgin raw materials, they are advancing the depletion of non-renewable sources. It has been estimated that these represent approximately 25%-30% of landfilled medical solid waste.[1] 2] As these products are rarely recyclable at their end of life, they contribute to plastic pollution.

Automation 52

Automation Cycle time Composites Sourcing 52

i4.0 today

NOVEMBER 7, 2022

Being shown for the first time at K 2022, the new Branson GLX-1 laser welder is an efficient, highly automated, connected system that maximizes efficiency and optimizes equipment effectiveness. mm and an adjustable laser power source height. Today Magazine. Branson GL-300. Branson GSX-E1 Ultrasonic Welding Platform.

Automation 52

Automation Industry 4.0 Industry 4.0 Cycle time 52

Fabricating & Metal Work

AUGUST 28, 2023

The American Gear Manufacturers Association’s (AGMA) Motion + Power Technology Expo brings together in one place the latest advancements in gearing and all three power transmission sources: mechanical power, fluid power and electrical power. It’s really been beneficial for Wisconsin Gear. Based in the U.S., Reasontek Corp.

Supply Chain 52

Supply Chain Manufacturing Cycle time Automation 52

iBASEt

APRIL 26, 2023

This type of closed-loop quality system is essential to achieving higher levels of quality while improving cycle time and assuring regulatory compliance with AS9100 standards. percent, on- time delivery was 99 percent, and reduced scrap and rework cost was 33.9 percent for the three preceding years. The plant had achieved a 99.8

Six Sigma 52

Six Sigma Manufacturing Execution System (MES) Compliance Electronics 52

Fabricating & Metal Work

AUGUST 24, 2022

High-precision axes, short measurement loops, dual measurement on all axes, consistent isolation of the EDM area from heat sources and submerged working areas optimize conditions for micro applications. This large vertical lathe is ideal for industries looking to dramatically reduce cycle time for difficult-to-cut materials.

Cycle time 52

Cycle time Aerospace Prototype  Manufacturing 52

i4.0 today

NOVEMBER 1, 2023

Further efficiency savings were achievable by reducing tube lengths and diameters, which decreases dead volumes and cycle times. The objective is to benefit from bionics as a source of inspiration and to realise these in industrial automation. Today Magazine. Today Magazine.

Industry 4.0 52

Industry 4.0 Industry 4.0 Automation Cycle time 52

Fabricating & Metal Work

APRIL 4, 2024

When a customer purchases a duMONT CNC slotter from Global CNC, a tooling certificate associated with the slotter can be redeemed through Pilot at any time. The robot then delivers finished, rifled parts to a multi-level discharge magazine.

Robotics 40

Robotics Robotics Automation Electronics 40

Fabricating & Metal Work

OCTOBER 2, 2022

Behringer Saws also supplements our machines with any material handling requirements you may have, including non-powered or powered roller conveyors, loading magazines, output sorting units, and many other optional components. An established sales and service network with local parts sourcing ensures customer satisfaction. Booth B8441.

Automation 52

Automation Form Robotics Robotics 52

i4.0 today

MAY 15, 2025

Material extraction is another hurdle, with lithium-ion batteries relying on sourcing critical materials such as lithium, nickel, cobalt, and copper. Cell simulation can then be used to reduce cycling time and increase yield. Today Magazine.

Benchmarking 52

Benchmarking Artificial Intelligence Cycle time Sourcing 52

Dinesh Mishra

JANUARY 22, 2025

Take for example, Mastercam software, that plays a pivotal role in achieving precision and efficiency, offering powerful CAD/CAM solutions that optimize toolpaths, reduce cycle times, and enable seamless multi-axis machining for intricate geometries. Box Do Visit Us at Stall A102 in Hall 1B at IMTEX 2025!

Supply Chain 59

Supply Chain Composites Consumer Goods Cycle time 59

Dinesh Mishra

JANUARY 22, 2025

They are capable of grinding complex materials like ceramic and high strength alloys more effectively, resulting in reduced cycle time and lower operational costs. Renewable Energy: Companies are transitioning to renewable energy sources, such as solar and wind, to power their operations.

Supply Chain 59

Supply Chain Smart manufacturing Artificial Intelligence Automation 59

Dinesh Mishra

JANUARY 22, 2025

This reduces cycle times and enables the production of higher volumes of parts without compromising quality. By improving energy efficiency, companies can also reduce reliance on non-renewable energy sources.

3D printing 59

3D printing Industry 4.0 Industry 4.0 Smart manufacturing 59