Manufacturer's Monthly

JANUARY 15, 2024

“Our plans for AMW include expansion of our Welding & Air Technology Zone and Robotics & Automation Zone. There will be Seven distinct Zones at AMW2024, each showcasing the highlights of the different active sectors in Australian manufacturing industry. and Digitalisation.

Robotics 80

Robotics Robotics Artificial Intelligence Advanced manufacturing 80

Manufacturer's Monthly

MAY 8, 2023

While at the same time, bringing nanotech and additive manufacturing into focus with demonstrations of the very latest research prototypes. There will be seven zones on the show floor of Australian Manufacturing Week, each with their own distinct specialisations. Don’t miss out!

Manufacturing 86

Manufacturing Prototype  Additive manufacturing Robotics 86

Gary Mintchell

JULY 5, 2023

Additional research also appears to show that a growth mindset can build resilience that turns potentially frustrating moments into learning experiences. Those with a growth mindset tend to be inspired by the success of others (rather than intimidated or defeated), and they focus on expanding their comfort zone.

Manufacturing 130

Manufacturing 130

AU Manufacturing

MARCH 8, 2023

To register, visit AMW’s event page at tickets.lup.com.au. For more information about AMW2023, go to australianmanufacturingweek.com.au. The post Registration for Australian Manufacturing Week 2023 now open appeared first on Australian Manufacturing.

Manufacturing 70

Manufacturing Advanced manufacturing Additive manufacturing Robotics 70

Mold Making Technology

FEBRUARY 1, 2024

.” Standard controller range for the MCS Hot Runner Control System is 6 to 120 zones. Additional features include leak detection; a softstart function; digital control of inputs; sequentially heat or cool groups of, or individual, zones; tool storage; group heating to prevent thermal imbalance; and zone diagnostics.

Function 52

Function Sourcing 52

AU Manufacturing

MARCH 9, 2023

The Workplace Health and Safety Show (WHSS) organisers announced the opening of the new Cleaning & Hygiene Zone, a special area inside the show that will be fully devoted to workplace hygiene and cleaning supplies. Registration for the event is free of charge. For more information, visit whsshow.com.au.

Compliance 84

Compliance Manufacturing 84

Gary Mintchell

JANUARY 25, 2024

In addition to global corporations choosing to base manufacturing operations in south-east Asia, some Chinese manufacturers are also expanding operations to other countries in the region. Malaysia, Vietnam and Thailand all offer relatively cheap destinations for the manufacture of parts for export to other markets.

Manufacturing 130

Manufacturing Electronics Automotive Automation 130

Mold Making Technology

MARCH 10, 2023

Basezone’s basic control unit H1250, available in 1, 2 and 4 control zones, enables a high level of reliability in production, ensured by improved, self-optimizing control characteristics, soft-start mode and LED displays for target/actual temperature, control parameters and an unambiguous alarm diagnosis.

Fit 52

Fit Function 52

E&T

AUGUST 4, 2023

Khan said that expanding the zone at the end of this month “was a difficult but necessary decision” and vowed not to back down. charge when driving into the zone. Small businesses and sole traders will be able to scrap three vans or minibuses in addition to receiving increased retrofit payments of £6,000, up from £5,000.

98

98

SMMT

MARCH 23, 2023

Returnerships will receive £63 million from government for an additional 8,000 Skills Bootcamps places during 2024-25 in England. There will also be at least one investment zone in Scotland, one in Wales and one in Northern Ireland. There will also be at least one investment zone in Scotland, one in Wales and one in Northern Ireland.

Logistics 98

Logistics Advanced manufacturing Automotive Form 98

Mold Making Technology

MAY 4, 2023

In addition, orientation is rarely controlled beyond parallelism or perpendicularity between surfaces. Conventional angular tolerances (± degrees) present two problems of interpretation; wedge-shaped tolerance zones and how to distribute the tolerance. Angular tolerances create wedge-shaped tolerance zones ( Figure 4b ).

Fit 98

Fit Six Sigma Form Function 98

E&T

JANUARY 30, 2023

It follows Mayor of London Sadiq Khan’s decision to expand London’s Ultra Low Emission Zone (ULEZ) London-wide in August this year. for each day they are in the zone. In October, it emerged that the expansion of ULEZ helped TfL to rake in an additional £93.6m in revenue from drivers.

105

105

Mold Making Technology

NOVEMBER 15, 2023

“Each module of the Polimold Valve Gate Sequencer controls two zones,” says Derrick Jones, PCS Company VP of sales. “Users have the option of controlling up to 14 zones with this user-friendly system.

52

52

Fabricating & Metal Work

FEBRUARY 9, 2024

The L&L model XLE3436 box furnace has an effective work zone of 34” wide by 22” high by 32” deep. A four-zone SSR control with digital biasing is provided to balance temperature gradients. It is equipped with a direct-lift vertical door with a floor switch to activate.

52

52

E&T

MARCH 14, 2023

The government is expected to provide £80m over the next five years to each of the new investment zones. Officials said the Investment Zone plan is designed to accelerate research and development in the UK’s “most budding industries”. The funds can be directed towards tax relief for businesses, training and infrastructure.

Artificial Intelligence 52

Artificial Intelligence Advanced manufacturing Manufacturing 52

Motion Control Tips

AUGUST 18, 2022

Beckhoff’s new EPX module series offers a compact option for Ex i signal acquisition from zones 0/20, 1/21 and Div. 1 as an addition to the wide range of EtherCAT Box modules. With robust IP67 protection, they enable direct and decentralized installation on machines and systems, even in harsh environments.

Form 73

Form 73

E&T

FEBRUARY 17, 2023

The zone was first introduced in April 2019 and charges non-compliant vehicles – mostly diesel cars that are more than six years old and petrol cars that are more than 15 years old – £12.50 for each day they are in the zone. Current proposals will see ULEZ expanded to cover the whole city from August this year.

Sourcing 105

Sourcing Form Automotive 105

Canadian Manufacturing

AUGUST 28, 2023

The electric pedal-assist bikes can be found at nine designated parking zones strategically located across campus, including outside student residences to the west and adjacent the UniverCity neighbourhood to the east. “I’m thrilled by the addition of e-bikes to our Burnaby campus ahead of the fall semester. per minute.

Manufacturing 52

Manufacturing 52

Canadian Manufacturing

FEBRUARY 22, 2024

The Technology Pilot Zones will not only aim to fill a gap in Canada’s market for CAV and ZEV commercialization but will also break down the high barriers to entry and facilitate technology piloting in real-world environments, including highways, cross-border sites and urban transportation settings.

Automotive 40

Automotive Advanced manufacturing Manufacturing 40

Fabricating & Metal Work

APRIL 4, 2024

In addition to protection against top and side impacts, the BOLT Safety Helmets with IMPACT ARMOR Liner allow users to use multiple accessories at once. Particularly when cornering, it must be possible to switch between several protection zones to ensure that collisions are avoided. The required safety functions are complex.

Function 91

Function Logistics Robotics Robotics 91

Canadian Manufacturing

AUGUST 8, 2023

This is in addition to the previously announced production supply agreement, adding new Euro 7 vehicle platforms planned for production by the OEM. LPG fueled vehicles are permitted to drive in emissions-restricted traffic zones in Europe. VANCOUVER — Westport Fuel Systems Inc.,

Manufacturing 97

Manufacturing 97

Additive Manufacturing

NOVEMBER 10, 2022

November 10, 2022 — 6K Additive and Fraunhofer Institute for Laser Technology ILT announced a collaboration to create a complete life cycle assessment (LCA) for additive manufacturing. “There are conflicting views on additive manufacturing regarding its environmental impact compared to traditional manufacturing.

Additive manufacturing 98

Additive manufacturing Manufacturing Sourcing 98

E&T

MAY 24, 2023

The report also shows that there is strong public backing for clean-air zones to tackle air pollution. London expanded its ultra-low emission zone in late 2021 and subsequently raised an estimated £93.6m of additional revenue over the following year.

Form 110

Form Automotive 110

Additive Manufacturing

SEPTEMBER 7, 2022

“Based on the XM200G multi-laser printer platform, the introduction of the XM300G is another example of how Xact Metal continues to combine the requirements of metal powder-bed fusion and advanced technology to establish a new level of price and performance for additive manufacturing.”. Xact Metal has already received orders for the XM300G.

3D printing 98

3D printing Cycle time Additive manufacturing Aerospace 98

Fabricating & Metal Work

APRIL 22, 2024

Particularly when cornering, it must be possible to switch between several protection zones, to ensure that collisions are avoided. With this information, the safe zone switching required can be implemented dynamically in the safety laser scanner PSENscan, the second component in Pilz’s safety solution. with MD-900. and Euro pallets.

Cargo 52

Cargo Logistics Robotics Robotics 52

Dinesh Mishra

MARCH 30, 2023

In addition, it also partly overlaps with grade T9325, giving T9415 one of the widest range of applications in steel turning. This further helps to improve tool life, reducing the plastic wear on the cutting zones. The Pramet T9415 is the most advanced MT-CVD grade launched by Dormer Pramet in almost ten years.

Manufacturing 98

Manufacturing 98

Manufacturer's Monthly

NOVEMBER 14, 2022

3D Systems announced the addition of two new materials — Certified HX and Certified CuCr2.4 — to its industry-leading materials portfolio. per cent) versus other nickel alloys which enhances its strength and resistance to corrosion, creep deformation, cracking, and oxidation in hot zone environments. Read more here.

Consumer Goods 77

Consumer Goods Aerospace Additive manufacturing Automotive 77

Fabricating & Metal Work

NOVEMBER 23, 2022

Additional features include: ??????? A dual work zones allow operators to weld in one zone while safely unloading parts in the other. ??????? Additional 7th axis 1800 mm (5.9’), designed to add flexibility and maximize the reach of the Cobot arm.

Robotics 52

Robotics Robotics Automation Manufacturing 52

Fabricating & Metal Work

SEPTEMBER 29, 2023

Unless the operator’s aim is excellent, the coolant stream could miss the mark entirely, resulting in poor chip evacuation, high tool temperature and an overheated cutting zone. As a result, additional peck cycles are required to evacuate chips and cool the tool head, which makes for longer overall part cycle times.

Cycle time 52

Cycle time Fit Lead Time Manufacturing 52

Fabricating & Metal Work

AUGUST 28, 2023

Vacuum Furnace Hot Zone Design The hot zone within a vacuum furnace is where the heating takes place. The hot zone is simply an insulated chamber that is suspended away from the inner cold wall. There are two types of vacuum furnace hot zones used: insulated (Image 2) and radiation style (Image 3). Table 3.

Function 52

Function Manufacturing 52

Dinesh Mishra

JUNE 27, 2023

The Company has already inked a contract to expand its services to Ten(10) additional airports across India, following the initial launch in Bengaluru in collaboration with Veera Vahana. Additionally, the charging infrastructure will be reinforced by CHARGE+ZONE, which has a nationwide network of charging stations.

Logistics 52

Logistics Electronics 52

Mold Making Technology

APRIL 7, 2024

Last but not least, five-axis machining can be used for finish machining operations after processes such as additive manufacturing (AM). In addition to the time and cost savings when using one setup, quality improvements are realized without having to reset a part in a new fixture and assure alignments.

Function 98

Function Fit Manufacturing Automotive 98

E&T

SEPTEMBER 21, 2023

The call was placed on September 8 from an unmodified Samsung Galaxy S22 smartphone located near Hana, Hawaii, in a wireless dead zone. Since then, testing of the new technology has continued, including additional voice calls, 4G video calls and now 5G cellular broadband connections.

Manufacturing 118

Manufacturing 118

Mold Making Technology

JULY 4, 2023

To keep this information current, MMT surveys and updates its supplier database every spring with the latest company contact information and product/service offerings for 11 categories, including Additive Manufacturing (AM). This year’s Additive Manufacturing content is exclusively online-only. — St. . — St. .

Additive manufacturing 98

Additive manufacturing Sourcing Manufacturing Composites 98

SMMT

FEBRUARY 22, 2024

In the case of waste collections we have set up alert zones where there are weight limits, so we don’t overload any of the vehicles. The family-run business, which specialises in the transportation of construction materials including steel, and bricks, expects to make additional savings when it embraces an add-on for brake testing technology.

Beverage 59

Beverage Compliance Electronics Function 59

E&T

FEBRUARY 14, 2023

The Clarion-Clipperton Zone in the Pacific Ocean, which provides habitat for about 25 cetacean species including dolphins and sperm whales, is of particular interest to mining companies aiming to exploit polymetallic nodules.

98

98

Control Design

SEPTEMBER 13, 2022

With the EPX module series, Beckhoff offers a compact option for Ex i signal acquisition from zones 0/20, 1/21 and Div. 1 as an addition to the wide range of EtherCAT Box modules. With robust IP67 protection, they enable direct and decentralized installation on machines and systems, even in harsh environments.

40

40