Control Engineering

OCTOBER 10, 2023

Learning Objectives Learn about the challenges facing organizations that wish to develop in-house PLC standards to improve their operations. Discover how lightweight standards can help retain resources and achieve more effective implementations. While creating PLC standards is challenging, maintaining them is even more difficult.

Fit 52

Fit Form Function Manufacturing 52

Mold Making Technology

JUNE 1, 2023

Basics, Advanced and Expert courses differ in terms of the depth of the curriculum and the mold change methods covered. While Basics provides an introduction to the topic and demonstrates the potential using a pilot machine in the Engel training center, the two more advanced courses take place on site at the processor’s facility.

Automation 52

Automation 52

Frost & Sullivan Manufacturing

MARCH 11, 2024

Frost & Sullivan’s Manufacturing webinar series delved into the topic ‘ Sustainable Manufacturing in the Digital Era: Integrating Machinery and Processes.’ Compliance and Competitive Advantage: Adhering to government regulations and international standards gives organizations a competitive edge.

Manufacturing 52

Manufacturing Value chain Compliance Automation 52

Frost & Sullivan Manufacturing

APRIL 3, 2024

Interoperability and health data sharing remained prominent topics. Interoperability platform vendors like InterSystems and Innovaccer concentrated on building upon FHIR standards and enhancing data access and integration. Ambient AI Scribing is becoming commonplace in healthcare, with consolidation expected in the long term.

Artificial Intelligence 52

Artificial Intelligence Logistics Electronics Sourcing 52

ATS

APRIL 27, 2022

Having ATS as your long-term partner ensures you will have ready access to a wide network of maintenance experts who are trained on the latest technologies, strategies, standards, certifications and regulatory requirements, with an embedded zero-incident safety culture. 4 mins | Trending Topics | Industrial Maintenance.

Lead Time 52

Lead Time Manufacturing 52

Control Engineering

SEPTEMBER 13, 2023

The most frequently cited standards by Federal OSHA in the fiscal year 2021 were falls, respiratory protection, ladders, hazard communication, scaffolding, fall production training, lockout/tagout, eye and face protection, powered industrial trucks and machinery and guarding. See Figure 3. Key within it is section 5.1

Form 97

Form Compliance Manufacturing 97

Control Engineering

JULY 19, 2023

During last year’s edition of our annual low voltage ac motor drive market research, we noticed a common term being mentioned – “Ultra Low Voltage” (ULV). ULV means less than 60V and determined the strength of the trend was significant enough to warrant producing a dedicated report on the topic.

Automation 97

Automation Robotics Robotics Manufacturing 97

Additive Manufacturing

OCTOBER 25, 2022

Post-processing of 3D printed parts has been, until recently, a topic that was often tertiary to the process of additive manufacturing. So what this really comes back to is, in terms of the dentistry or the dental 3D printed workflow, post-processing is not just an add-on.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Automation 98

Control Engineering

FEBRUARY 7, 2023

The robots themselves tend to be fairly standardized in terms of hardware and it’s the software that’s often the key IP for mobile robot vendors. As you can see, durable manufacturing dominates the market and will likely continue to do so in the short- to medium term. Courtesy: Insight Analysis.

Robotics 52

Robotics Robotics Automation Automotive 52

ATS

NOVEMBER 28, 2022

Whereas a term like predictive maintenance refers to specific technology, hardware and methodology, precision maintenance takes a bigger-picture, strategic point of view. Industry best practices and standards are reliably applied and met. 5 mins | Trending Topics | Industrial Maintenance, Industrial Technology.

Industry 4.0 52

Industry 4.0 Industry 4.0 Smart manufacturing Form 52

Frost & Sullivan Manufacturing

JANUARY 23, 2024

Easy to deploy and use, the Cerence Chat Pro seamlessly integrates with the in-car assistant to provide information on a wide range of topics. Volkswagen has declared its intention of becoming the first mass vehicle manufacturer to offer Chat GPT as a standard feature on some of its models from Q2, 2024.

Artificial Intelligence 97

Artificial Intelligence Cargo Automotive Function 97

Fastener News Desk

JULY 10, 2023

The report, which recaps Fastenal’s performance and progress in 2022, was produced with reference to the Global Reporting Initiative (GRI) standards and aligns with the ESG disclosure and reporting frameworks established by the Sustainability Accounting Standards Board (SASB) and the Taskforce on Climate-Related Financial Disclosures (TCFD).

Supply Chain 40

Supply Chain Sourcing Compliance Logistics 40

MEM

FEBRUARY 16, 2023

At the beginning of the first UK Hydrogen Week, Baxi, a leading heating and hot water solutions provider has called for the industry to respond to the Government’s pivotal Improving boiler standards and efficiency consultation.

Manufacturing 52

Manufacturing 52

Control Engineering

DECEMBER 15, 2022

The studio offers tutorials on many manufacturing topics such as robotics, coding and additive manufacturing, which have a growing role in manufacturing. Teachers can reserve the space as an extension of their classroom activities as all curriculum is aligned with Indiana State Standards. is equipped with Industry 4.0

Industry 4.0 52

Industry 4.0 Industry 4.0 3D printing Robotics 52

i4.0 today

DECEMBER 19, 2022

Thermal management continues to be a key topic for electric vehicle (EV) battery design. Early trends in the market largely revolved around the adoption of active cooling for the battery pack, and now this is the industry standard. Thermal Interface Materials. Upcoming Free-to-Attend Webinar.

Electronics 52

Electronics Form Supply Chain Automotive 52

i4.0 today

AUGUST 2, 2023

Join Parks Associates’ Director of Research Jennifer Kent as she moderates a panel of experts from Amazon Alexa, the Connectivity Standards Alliance (CSA), Google Nest, Samsung SmartThings, and Silicon Labs to discuss the growth of Matter and where it is going. Matter Development is Accelerating – What’s the Latest?

Supply Chain 52

Supply Chain Manufacturing 52

Control Engineering

NOVEMBER 23, 2022

Research and data collection from the SI Giants includes views on corporate challenges and educational and mentoring topics. Our best clients are looking for a partner and want to form a relationship geared toward long term mutual benefits. Automation standards are established and followed. System integrator concerns, education.

Supply Chain 52

Supply Chain Lead Time Automation Form 52

Manufacturer's Monthly

AUGUST 24, 2022

IMCRC delves into why sovereign manufacturing capability has become such a hot topic and how Australia can accelerate its capacity to achieve this. We need a long-term vision, strategy and industrial policy with appropriate incentives and catalysts to lead Australia’s manufacturing industry towards it. solutions and business models.

Manufacturing 98

Manufacturing Industry 4.0 Industry 4.0 Supply Chain 98

E&T

JANUARY 26, 2023

He added: "The ChatGPT model sits in the ‘emerging generative AI' category and has been designed to offer human-like conversations across a range of diverse topics according to its domain-specific model building and training. Not limited to standard text interactions, ChatGPT can write poetry, help debug code and even troubleshoot IT issues.

Artificial Intelligence 111

Artificial Intelligence Composites Automation 111

Automation Mag

SEPTEMBER 7, 2022

As chief technology evangelist, Travis Cox’s goal will be to raise awareness of industry trends, modern technologies, open standards and the many possibilities of the Ignition platform. Cox, McClusky and Waits are the first individuals to hold their respective new roles at the company.

Automation 52

Automation 52

Control Engineering

JULY 19, 2022

In part this is because safety standards and regulations evolve over time, so the concept “we’ve always done it this way” doesn’t hold up. . It’s important to understand the most common topics involved with safety design, providing overview information required to inform staff. . Standard non-safety devices often are not acceptable.

Automation 111

Automation Form Warehousing Fit 111

Fabricating & Metal Work

JULY 19, 2023

She’ll also explore the “glass cliff” phenomenon, a term that refers to the challenges women face after breaking through the glass ceiling and the tendency of companies to promote women to senior roles during times of crisis when probability of failure is highest.

Manufacturing 40

Manufacturing 40

Fabricating & Metal Work

JULY 19, 2023

This includes topics such as addressing unmet needs, leadership focus, best practices, price/performance value, and customer experiences. SICK’s products and solutions have standard connectivity across platforms via solutions to the cloud and SICK’s Telematic Data Collector (TDC). Sensors do more than merely just “sense.”

Industry 4.0 40

Industry 4.0 Industry 4.0 Automation Manufacturing 40

Control Engineering

JULY 12, 2023

These allow companies to benchmark performances against industry standards and best practices, often times including a holistic evaluation of the company. This term was famously announced in 2011 at Hannover Fair as part of the German High-Tech Strategy, and since then it has taken hold across the world. Winter: The term “Industry 5.0”

Industry 4.0 98

Industry 4.0 Industry 4.0 Smart manufacturing Manufacturing 98

i4.0 today

JUNE 8, 2023

In their latest report on the topic, “ Second-life Electric Vehicle Batteries 2023-2033 “, IDTechEx analyses the various methods players are using to model and estimate important retired EV battery performance parameters. This is because this will impact the performance of the final second-life battery once repurposed.

Automotive 52

Automotive Form Sourcing Industry 4.0 52

Control Engineering

JULY 20, 2022

The expanse of DX and IIoT topics can be overwhelming even to someone more experienced on the OT side. The term “edge” is misleading because it is at the center of so much. The edge acquires OT data from process systems or historians using interfaces conforming to open industry standards like OPC and OPC UA. Courtesy: Yokogawa.

Artificial Intelligence 105

Artificial Intelligence Function Value chain Automation 105

E&T

NOVEMBER 11, 2022

We see audio develop in so many areas,” he added, pointing to the proliferation of audio in an increasingly broad ecosystem of connected products, with audio features now present in such standard household objects as fridges, furniture, shower heads and light bulbs. It’s a fine line.”.

Bottleneck 75

Bottleneck Form Manufacturing 75

ATS

JUNE 15, 2023

The term refers to the practice of bringing offshore production processes – those carried out in a country other than a manufacturer’s home country — back to domestic facilities. What is reshoring in manufacturing? Reshoring vs. nearshoring Reshoring and nearshoring are similar strategies that can offer many similar benefits.

Manufacturing 52

Manufacturing Supply Chain Logistics Industry 4.0 52

Control Engineering

NOVEMBER 22, 2022

Hall, answered questions from Control Engineering and Plant Engineering (CFE Media and Technology) about these and other topics. GTH is very focused on project management and we have been seeking to improve development and adherence to standards. Question: If there is one long-term goal you have for the company, what is it?

Supply Chain 52

Supply Chain Process control Pharmaceutical Automation 52

Manufacturer's Monthly

NOVEMBER 9, 2022

If well targeted, this can help grow our ‘sovereign’ capability and capacity, drive sustainable economic growth and deliver stable, well-paid jobs – a topic I explored in my comment last month. Importantly, we have a renewed focus on the design and development of complex goods and services to increase our self-reliance.

Manufacturing 98

Manufacturing Industry 4.0 Industry 4.0 Value chain 98

Control Engineering

NOVEMBER 23, 2022

David Lax, president of Eosys, answered questions from Control Engineering and Plant Engineering (CFE Media and Technology) about these and other topics. At Eosys, our desire is to be the preferred integrator of choice for talented employees and customers looking for long-term partnerships, and this honor reinforces that vision.

Beverage 52

Beverage Supply Chain Automation Manufacturing 52

ATS

JULY 7, 2023

The difference between pressure sensors, transducers and transmitters Pressure sensors, pressure transducers and pressure transmitters are each able to take pressure measurements and produce data and output, but they are not identical or interchangeable devices or terms. This differential generates a pressure reading.

Benchmarking 52

Benchmarking Form Composites Compliance 52

Manufacturer's Monthly

MARCH 7, 2023

It is vital that appropriate strategies are in place to reduce welder exposure to fumes and prevent the long-term health effects that can result from exposure. In early 2017, the International Agency for Research on Cancer classed welding fumes as ‘Carcinogenic to Humans’.

Fit 52

Fit Sourcing Manufacturing 52

E&T

AUGUST 10, 2022

I rarely use the term AI ethics. I prefer the term AI ethical risk.”. Blackman says, “there are lots of headlines on these topics that prompt people to ask what we’re going to do about it. Corporate codes of conduct urge good judgement, integrity and high ethical standards. “And that’s what this book is about.

Artificial Intelligence 76

Artificial Intelligence Sourcing Automation 76

Frost & Sullivan Manufacturing

NOVEMBER 30, 2023

The UAE and KSA at the Forefront UAE and KSA are at the forefront of the Gulf Cooperation Council (GCC) area in terms of their ambitious smart port efforts. This integration of digital solutions establishes a high standard for smart port operations.

Logistics 52

Logistics Artificial Intelligence Cargo Benchmarking 52

Fastener News Desk

JUNE 13, 2023

Terms of the deal were not disclosed. AFC Industries Acquires White Distribution and Supply Zago’s Manufacturing, Co-founder and CEO Gail Friedberg Rottenstrich has been appointed to serve on the Manufacturing Extension Partnership (MEP) Advisory Board of National Institute of Standards and Technology (NIST)! manufacturing.

Supply Chain 52

Supply Chain Manufacturing Form 52

Mold Making Technology

MARCH 21, 2024

One of MMT’s more popular topics is mold maintenance and repair -- a critical aspect of moldmaking that impacts the OEM, molder and mold builder. Finally, we are considering accreditation under the same ANSI/ASTM E-2659-18 standard that our PTE and Molders Series courses are accredited to.

Fit 52

Fit Function Sourcing 52