Mold Making Technology

APRIL 13, 2023

It All Started With a Problem My journey into additive tooling began as a moldmaker with a problem to solve. In 1996, I worked with a hot runner company with technology built like a Swiss watch whose intricacies would often fail during the injection molding process. 3D Keltool mold and SLA pattern. The results were terrific.

3D printing 98

3D printing Cycle time Additive manufacturing Lead Time 98

Mold Making Technology

DECEMBER 4, 2022

Photo Credit, clockwise from top left: GF Machining Solutions, IMCO Carbide Tool, DMG MORI USA and Capture3D. 28, 2022): Cutting Tools. Mold Materials. Mold Components. Mold Maintenance, Repair and Surface Treatment. Cutting Tools. Ball-End Tool Contours, Chamfers and Finishes in One Pass for Most Materials.

3D printing 98

3D printing Cycle time Automation Additive manufacturing 98

Mold Making Technology

APRIL 2, 2023

The cavity plate of a 60 × 89-inch aluminum production tool for low-pressure/structural foam molding is being milled on the Fooke Endura 704Linear. CDM estimates it could rough and semi-finish/finish the large tool two to three times faster on the Fooke than on any other equipment in its shop. CDM Tool & Mfg.

Made-to-spec 98

Made-to-spec Fit Composites Prototype  98

Mold Making Technology

FEBRUARY 12, 2023

Current as of 2/01/23 This article contains information on exhibitors highlighting 3D Printing , Machining or Cutting Tools products and services at their booth in the Moldmaking Pavilion and across the show floor.

3D printing 98

3D printing Cycle time Additive manufacturing Manufacturing 98

Fabricating & Metal Work

APRIL 14, 2023

The VTS SF-45 units are installed inside the machine working area to monitor actual tool working conditions without any contact while the tool is able to rotate at full spindle speed (up to 80k rpm) during data acquisition. µm, the VTS enables measurement of tools with diameters as small as 10 µm with repeatability of 0.2

Process control 98

Process control Aerospace Automotive Automation 98

Mold Making Technology

JUNE 25, 2023

This month’s roundup features products, processes and services involved with additive manufacturing, maintenance and repair, mold components and more. Actuating an ejector pin forward movement, the product can be used when additional pin travel is required to release a molded part from lifters, stripper plates or deep core features.

3D printing 52

3D printing Rapid prototyping Additive manufacturing Artificial Intelligence 52

Mold Making Technology

MAY 2, 2023

Initially, that involved 3D printing metal tool components, details and geometries that would otherwise need to be EDM’d. Solution: Using an EOS DMLS printer and MS1 powder, an insert was printed on a stainless build plate, and pre-plumbed to connect extensive conformal cooling channels to the mold’s cooling system.

Cycle time 98

Cycle time 3D printing Additive manufacturing Supply Chain 98

Mold Making Technology

MARCH 8, 2023

were enabled by both plastics design freedom and innovative tooling technologies. And where there is innovation in injection-molded plastic parts, you can expect innovation in injection-molded plastic tooling. Rear taillights feature thick injection-molded light blades in vertically elongated H shapes.

Function 98

Function Prototype  Automotive Form 98

Mold Making Technology

MAY 14, 2023

This month’s focus is hot runners and mold components. In this technology roundup, discover different hot runner and mold component technologies, services and processes that can help push business to the next level or just solve common problems shops may face on a day-to-day basis.

Function 98

Function Manufacturing 98

Mold Making Technology

FEBRUARY 6, 2024

.: Celebrating 50 years in business, Eifel, founded in 1973 by my father, Josef Hecker, originated as a tooling aids provider for automotive suppliers. Being an immigrant from Germany, my dad leveraged his artisan craftsmanship and ability to build relations into 15 years of tooling support in the automotive and aircraft industries.

Automotive 52

Automotive Enterprise Resource Planning (ERP) Fit Consumer Goods 52

Mold Making Technology

AUGUST 29, 2023

This month’s roundup has a specific focus on cutting tools and mold components with some miscellaneous highlights from other mold-related categories. Molds can be calculated, configured and ordered around the clock with just a few clicks. mm, can be easily adjusted using the Hasco Z14300 eccentric unit.

Fit 52

Fit Additive manufacturing Sourcing Automation 52

Modern Machine Shop

MARCH 22, 2023

Photo Credit: Methods Machine Tools Inc. Methods Machine Tools , a supplier of high-precision CNC machine tools, automation and engineering services, has announced a new commercial agreement with Yasda Precision Tools K.K. directly and through our dealer network,” says Dale Hedberg, COO at Methods.

Aerospace 52

Aerospace Automation Manufacturing 52

ATS

MARCH 5, 2024

In OEE quality performance is expressed in time whereas the FPY calculation uses number of units, but given a fixed part production rate, these two are interchangeable. Consider a molding machine that ejects 10 plastic parts per cycle and runs at 10 cycles per hour. Then the number of parts meeting specification is 95.

Standard Operating Procedure (SOP) 59

Standard Operating Procedure (SOP) Overall Equipment Effectiveness (OEE) Manufacturing Function 59

Mold Making Technology

AUGUST 16, 2023

Delta Mold Inc. has manufactured 17,500 unique molds over the last 44 years. With a dedicated repair program, Delta Mold services include on-site evaluations and support, as well as 24-hour repairs and fast parts delivery to keep customer operations moving forward. Photos Credit, all images: Delta Mold Inc. Operates 24/7.

Cycle time 52

Cycle time Prototype  Manufacturing Automation 52

Plastics News

NOVEMBER 21, 2022

Elmet, of Oftering, Austria, is a supplier of processing equipment for liquid silicone and production of LSR parts. One of biggest challenge customers face is dealing with a supplier that has knowledge, vs. one who does not. "It It is very important to deal with a supplier with experience with materials.

Automation 52

Automation Beverage Consumer Goods Benchmarking 52

Mold Making Technology

JUNE 6, 2023

KG offers molds, notching, automation and production equipment for vehicle body sealing systems headquartered in Germany with locations worldwide, including a strong presence in North America thanks to its North Carolina facility. Photo Credit, all images: PFAFF Molds Who is PFAFF? Molds for vehicle sealing systems can be intricate.

Automotive 95

Automotive Automation Prototype  Beverage 95

Fabricating & Metal Work

DECEMBER 20, 2022

Using the CoroPlus Tool Supply hardware, manufacturers can easily store and keep track of tools. Unite Tool Inventory Management with Tool Logistics. Unite Tool Inventory Management with Tool Logistics. The tool supply consists of software, hardware and supporting service elements.

Computer-Aided Design (CAD) 52

Computer-Aided Design (CAD) Bill of Materials Logistics Sourcing 52

Mold Making Technology

MARCH 5, 2023

This profile focuses on mold components and hot runners, highlighting the exhibitors who will be showcasing their innovations and technology in this area at the show. Mold Components and Hot Runners Get to Know CUMSA USA LLC The introduction of standard components for injection molds has been a critical innovation for the moldmaking industry.

Bill of Materials 52

Bill of Materials 3D printing Cycle time Supply Chain 52

Mold Making Technology

FEBRUARY 22, 2022

Integrating and learning how to use digital tools can help shops practice predictive maintenance and improve tool performance. Photo Credit, all images: Sandvik Coromant Today, there are many innovations in cutting tool technology. Whether a seasoned pro or novice, these technologies are new for everyone.

Form 52

Form Manufacturing 52

Dinesh Mishra

JANUARY 30, 2023

In October 2022, Dormer Pramet’s President Eduardo Martin visited the company’s Ankleshwar Production Unit, Gujarat, as part of the Dormer Pramet Management Group meeting (DPMG). It was the first gathering of the entire DPMG in Ankleshwar following the acquisition of Miranda Tools in December 2020.

Automotive 52

Automotive Lean manufacturing Automation Aerospace 52

Additive Manufacturing

MAY 22, 2023

Merit3D has steadily advanced their mass production processes and expanded their capacity, but has always had to compete with Asian manufacturers on cost and the ability to produce in mass with injection molding. Merit3D is printing 40,000 of this part per week. ” This massive order really sets the precedent for how parts are made.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Supply Chain 52

Mold Making Technology

JANUARY 26, 2023

A recent development project evaluated the feasibility of using wire-arc additive manufacturing (WAAM) to produce layup tooling for complex contoured winglets mounted at the tips of the wings of MQ-9B SkyGuardian and SeaGuardian (shown above) remotely piloted aircraft from General Atomics Aeronautical Systems Inc.

Composites 52

Composites 3D printing Cycle time Lead Time 52

Fabricating & Metal Work

APRIL 4, 2024

This collaboration allows Pilot to combine its broaching expertise with Global CNC’s knowledge of machine tool interfaces so customers using the motorized slotters can increase the versatility of their machining centers and enhance productivity. The automatic tool changer holds up to 20 tools. GROB Systems, Inc.

Robotics 40

Robotics Robotics Automation Electronics 40

Fabricating & Metal Work

SEPTEMBER 29, 2023

These cobots, robotic tooling and sensing, and customizable and innovative software solutions offer efficiency and the highest levels of safety. www.ati-ia.com/FANUCFT New Version of CAD/CAM Software is Unparalleled for Advanced Toolmaking Cimatron 2024 directly connects to the CoroPlus Tool Library and TDM tool management system.

Robotics 52

Robotics Robotics Automation Compliance 52

Modern Machine Shop

MAY 26, 2023

It took about two laps around the Automate exhibitors’ space at the Huntington Place convention center in Detroit to realize that the show’s target audience is robotics and systems integrators — tech specialists that develop and implement custom automation solutions for suppliers and OEMs.

Robotics 59

Robotics Robotics Automation 3D printing 59

Modern Machine Shop

MARCH 16, 2023

” Fritz Studer AG, a United Grinding company, held its annual Motion Meeting on February 10, 2023, at its Thun, Switzerland headquarters. Stability in the majority of the company’s end markets (tooling, die/mold , machine manufacturing and precision engineering) offset a downturn in the automotive sector.

Manufacturing 98

Manufacturing Warehousing Automation Robotics 98

Fabricating & Metal Work

JULY 23, 2023

This FABTECH section outlines some of the products and demonstrations expected to be on display by more than 1,500 world-class suppliers in three exhibition halls. LogoPress has been developing die design software for the tool and die industry as well as flattening and blank prediction software for many kinds of parts.

Form 52

Form Automation Robotics Robotics 52

Dinesh Mishra

FEBRUARY 11, 2024

This industry has now overtaken the declining automotive and supplier industry. The “Tool” segment remained below expectations. The “mechanical engineering” and “die & mold” segments also maintained their important positions. the revolutionary hardware and software architecture of UNITED GRINDING. The C.O.R.E.

Logistics 52

Logistics Automation Supply Chain Aerospace 52

Fabricating & Metal Work

APRIL 3, 2024

This is particularly relevant in the grinding of precision tools. A test was performed over a large batch of 6 mm tools where runout was measured before and after grinding at 2.5 link] Expansion of Fullcut Mill Tools Results in Wider Applications The BIG-PLUS BBT series from BIG DAISHOWA now offers a 63 mm diameter cutter.

Form 52

Form Aerospace Manufacturing Fit 52

Fastener News Desk

OCTOBER 13, 2023

Our extensive logistics network operates in the Canada, USA, the United Kingdom, Germany, Poland, Romania, France, Turkey and China. Building strong relationships with suppliers, customers, and employees is crucial. We are among the top 5 in Europe and the top 12 in the world.

Logistics 59

Logistics Supply Chain Lead Time Additive manufacturing 59

Control Engineering

AUGUST 4, 2022

CI), a machine tool manufacturer. Much like a professional-grade table saw’s rip fence, backgauges on industrial press brakes help operators accurately position material against tooling. . Then a press mold lowers into the material to crimp, curve or bend it. The press brakes made by Cincinnati Inc. metal plates.

Form 98

Form Electronics Supply Chain Manufacturing 98

HGR Inc.

NOVEMBER 18, 2022

North American Automotive Tooling Spend Forecast to Reach $8.3B HRI), a leading authority to the manufacturing industry, recently released the results of the Harbour IQ in-depth study on the current state of the automotive vendor tooling industry. Harbour Results Inc., | Nov 15, 2022 | SME. Harbour Results Inc.

Manufacturing 79

Manufacturing Supply Chain Industry 4.0 Industry 4.0 79

Fabricating & Metal Work

AUGUST 23, 2022

At this all-encompassing gathering, attendees can meet face-to-face with world-class suppliers, view demonstrations of the latest industry machinery, products and services, discover new ways to increase productivity, and so much more. Quick Setup Tools Save You Time. Bluco® Modular Fixturing Systems Solve Manufacturing Challenges.

Robotics 52

Robotics Robotics Form Automation 52

Dinesh Mishra

JANUARY 30, 2023

India’s metal-cutting machine tools sector is one of the biggest markets for the global USD 76-B MCMT industry. India is among the world’s biggest metal-cutting machine tools markets, with sectors like automotive, general engineering, energy, and aerospace being the major demand drivers.

Industry 4.0 52

Industry 4.0 Industry 4.0 Aerospace Automotive 52

Fastener News Desk

AUGUST 27, 2023

The Fastener industry remains strong, and we’re thrilled to help unite the community once again.” Breaking the mold, IFE introduces Fireside Chats—a captivating unscripted format. OEMs and suppliers are responding; however, many are challenged by exactly how they pivot to this new approach and what it takes to get it done.

Supply Chain 52

Supply Chain Sourcing Automation Assembly Line 52

Fabricating & Metal Work

OCTOBER 2, 2022

Don’t miss the chance to be inspired by industry experts, suppliers and your peers in the metal forming, fabricating, welding and finishing sectors at FABTECH 2022. FABTECH gives you the tools, technology, and thought leadership to stay ahead of the competition. BLM Group to Demonstrate the LT7 With Insertion Unit. Booth B7817.

Automation 52

Automation Form Robotics Robotics 52

Modern Machine Shop

FEBRUARY 7, 2023

Sims story illustrates the challenge of launching and building a precision machining business, how the company plans to face that challenge and the type of support both from family and suppliers that is invaluable to the success they're aiming for. Puneet was in the United States about a year before I came. Did we make 10%?

Sourcing 52

Sourcing Manufacturing Supply Chain 3D printing 52