i4.0 today

DECEMBER 9, 2022

Smart Eye, the leading developer of DMS technology to the automotive industry, has received a new order for its AIS product – a complete hardware and software Driver Monitoring System for small-volume car manufacturers, commercial vehicles and the automotive aftermarket. for more information. Visit www.smarteye.ai Today Magazine.

Sourcing 52

Sourcing Automotive Manufacturing Industry 4.0 52

Control Engineering

MAY 23, 2023

Information management insights Manufacturers have access to enormous amounts of information, but they need to have put in context for them to make any sense of it. Courtesy: Chris Vavra, CFE Media and Technology Turning data into information for better context What are many of these technologies and concepts designed to do?

Automation 52

Automation Warehousing Logistics Robotics 52

Cisco Industrial Automation

APRIL 27, 2022

Digital manufacturing stresses factory networks in ways their designers never dreamed of. By some accounts, manufacturing was the most attacked industry in 2021. By some accounts, manufacturing was the most attacked industry in 2021. Unmanaged switches move information between devices—but that’s it. No monitoring.

Manufacturing 332

Manufacturing Automation Digital manufacturing Smart manufacturing 332

Min-Hui

MARCH 26, 2023

If you’re looking for an injection molding machine manufacturer, you must know some critical information to ensure your chosen supplier will meet your needs. This article will give tips for selecting the best injection molding machine manufacturer.

Sourcing 52

Sourcing Manufacturing 52

Gary Mintchell

JULY 12, 2023

There was a time when I would take information from OPC Foundation and chat with the MQTT people and then return the favor. Hoppe wrote, “Still to this day people only think of OPC UA merely as a secure protocol to move information. She does follow the IoT trail into manufacturing at times. It is so much more than that.

Manufacturing 130

Manufacturing Form Fit Sourcing 130

Gary Mintchell

MARCH 29, 2023

I’ve covered technology advances for industrial and manufacturing applications for 25 years. You ask it a search question and it is just as likely to return as much wrong information as correct. You can click each link and decide if that is the information you were looking for. You don’t know the source.

Manufacturing 130

Manufacturing Form Function Sourcing 130

Gary Mintchell

AUGUST 1, 2023

OMAC birthed about the same time that I left manufacturing to become an editor at Control Engineering. Now called The Organization for Machine Automation and Control, it has found a home within the Packaging Machine Manufacturers Institute (PMMI) which also was the temporary home of my old magazine Automation World.

Manufacturing 130

Manufacturing Automation Sourcing 130

Mold Making Technology

MAY 15, 2024

Source (All Images) | Oasic Consulting Trying to produce a perfect match between two surfaces is not only difficult to achieve but also very costly. Mold designers create deliberate mismatches for ease of manufacturing and improved part aesthetics. There are two areas of deliberate mismatch to consider. Figure 2.

Manufacturing 98

Manufacturing Sourcing 98

Machine Metrics

JULY 20, 2023

Manufacturers need a sound strategy to compete, and that strategy must have a solid foundation in truth; knowing exactly what is happening across the operation. So few manufacturers have this source of truth to rely on, leaving them with a quasi-truthful stream of information to make decisions with.

Manufacturing 75

Manufacturing Sourcing 75

Fabricating & Metal Work

DECEMBER 12, 2022

For more information, visit [link]. Subscribe to learn the latest in manufacturing. The post Application-Specific Protective Gloves are Easy to Source appeared first on Fabricating and Metalworking.

Sourcing 52

Sourcing Fit Manufacturing 52

Gary Mintchell

OCTOBER 17, 2023

It’s worth your time following the variety of database products that may help you in your manufacturing digital transformation. I am retaining all the “about” paragraphs below the news in case you are not sure who this is and may want additional information. This release is from MongoDB.

Automotive 147

Automotive Manufacturing Assembly Line Prototype  147

Gary Mintchell

APRIL 16, 2024

Currently, manufacturers struggle to translate compliance initiatives into making informed decisions during the product design phase due to outdated data systems and data silos. The post Implementing Product Lifecycle Intelligence Yields Benefits appeared first on The Manufacturing Connection. Oops, many still do that, too.

Supply Chain 147

Supply Chain Compliance Sourcing Manufacturing 147

Gary Mintchell

MAY 2, 2024

IRIS Foundry provides the differentiating building blocks of industrial data management and governance needed to deploy AI-embedded manufacturing solutions at enterprise scale. The result is a dynamic industrial knowledge graph, simplifying access to and navigation of information.

Sourcing 130

Sourcing Manufacturing 130

Frost & Sullivan Manufacturing

JUNE 7, 2022

EBSCO is the world’s trusted source of information for global institutions, with more than 70 years of addressing the research interests of several academic organizations, libraries, medical institutions, and more. About EBSCO Information Services. EBSCO Information Services is a division of EBSCO Industries, Inc.,

Function 52

Function Sourcing 52

Manufacturer's Monthly

APRIL 23, 2024

Image: Amonthep/stock.adobe.com Discover how you can enhance and streamline your manufacturing operations, boost efficiency, and drive growth for medium to larger sized businesses. Enter MYOB Advanced Manufacturing, a cloud-based ERP solution that interconnects every facet of an enterprise, end to end.

Enterprise Resource Planning (ERP) 86

Enterprise Resource Planning (ERP) Manufacturing Discrete manufacturing Advanced manufacturing 86

Foley

JULY 5, 2023

2023) held that a food manufacturer could rely on an ingredients list panel located on the back of the challenged product packaging to determine whether an “ambiguous” phrase on the front label was misleading or deceptive. On June 9, 2023, the Ninth Circuit in McGinity v. The Procter & Gamble Company , No. 22-15080 (9th Cir.

Sourcing 52

Sourcing Manufacturing 52

ATS

APRIL 5, 2024

It can also cover operational information such as run time and down time. In other cases, manufacturers retrofit machines with IoT devices. Many process plants operate SCADA (supervisory control and data acquisition) systems where instrumented equipment shares status information with a central controller.

Manufacturing 59

Manufacturing Manufacturing Execution System (MES) Bottleneck Cycle time 59

Canadian Manufacturing

JANUARY 20, 2023

provided an update on the nutritional information and new production partners for its UN(THINK) Awakened Flour. Maker’s Malt grows over 90 per cent of the grain processed in its facility, while also sourcing and sprouting the grains from local, Saskatoon-based farmers. VANCOUVER — AgriFORCE Growing Systems Ltd.,

Sourcing 40

Sourcing Manufacturing 40

Gary Mintchell

DECEMBER 14, 2023

The three role-based copilots—Plant Performance Copilot, Digital Manufacturing Copilot, and the Connected Worker Copilot—provide enhanced human-like interaction so workers can get beyond standard data analytics and analysis to understand what happened, why, and more importantly, anticipate future events.

Overall Equipment Effectiveness (OEE) 147

Overall Equipment Effectiveness (OEE) Bottleneck Sourcing Digital manufacturing 147

Gary Mintchell

FEBRUARY 14, 2023

The information about the condition of components can be transparently displayed among suppliers and customers to properly re-use parts and components. The post New Open Marketplace for Manufacturing Applications appeared first on The Manufacturing Connection.

Value chain 130

Value chain Manufacturing Automotive Supply Chain 130

Manufacturer's Monthly

AUGUST 15, 2023

A clean work environment is essential for product quality, worker safety, and regulatory compliance in any manufacturing premises. This is where innovative technology and efficient cleaning processes unite to streamline manufacturing processes in three simple steps – Assess, Clean, and Simplify.

Manufacturing 79

Manufacturing Compliance Automation Sourcing 79

Robotics Business Review

MARCH 26, 2024

RoboticsCareer.org has been redesigned to help people find careers in manufacturing. Source: ARM Insitute The Advanced Robotics for Manufacturing, or ARM Institute today said it has added capabilities to RoboticsCareer.org, its resource for robotics careers in U.S. manufacturing.

Function 91

Function Manufacturing Robotics Robotics 91

MEM

SEPTEMBER 19, 2023

In the rapidly evolving landscape of manufacturing, the spotlight shines brightly on Artificial Intelligence (AI), the catalyst behind a transformative wave. AI is revolutionizing processes, enhancing efficiency, and propelling manufacturing into a future brimming with possibilities. The result? The result?

Manufacturing 98

Manufacturing Pharmaceutical Assembly Line Supply Chain 98

Manufacturer's Monthly

AUGUST 29, 2023

The company contracted to deliver $14 million in upgrades at Hillarys and Fremantle has been installing the WA made jetties after local manufacturers geared up to supply major components often made overseas. Minister Assisting the Transport Minister David Michael spoke about the project and what it means for local manufacturing.

Manufacturing 82

Manufacturing Sourcing 82

Gary Mintchell

APRIL 27, 2023

This extension was requested by IT companies to ensure efficient and standardized access to important information: IT-applications need the ability to utilize the data from OT to use it in concepts like Data Spaces, Digital Twins and the Metaverse. These solutions often share information between multiple companies.

Sourcing 130

Sourcing Manufacturing 130

Gary Mintchell

MAY 7, 2024

Margo aims to deliver on its interoperability promise through a modern and agile open-source approach, which will bring industrial companies increased flexibility, simplicity and scalability as they undergo digital transition in complex, multi-vendor environments. This further strengthens ABB’s commitment to open standard based systems.

Cargo 130

Cargo Automation Sourcing Form 130

Control Engineering

JULY 31, 2023

They are no longer just monitoring tools but are shaping the future of smart factories, thanks to open system architecture and the ability to integrate data from IT and OT sources. goals, modern SCADA systems must provide advanced functionalities and flexible data access for informed decision-making. To achieve Industry 4.0

Industry 4.0 75

Industry 4.0 Industry 4.0 Manufacturing Execution System (MES) Manufacturing 75

iBASEt

FEBRUARY 22, 2023

Virtually every manufacturer today views quality as a key success metric. To activate this culture of quality across all functions, it’s essential to leverage digital manufacturing technology that integrates and enforces quality management throughout the manufacturing process, and even beyond the four walls of the factory.

Manufacturing Execution System (MES) 83

Manufacturing Execution System (MES) Manufacturing Discrete manufacturing Digital manufacturing 83

Mold Making Technology

MARCH 4, 2024

Source | Copilot The Society of Plastics Engineers Mold Technologies Division announces the first-ever Glenn Beall Scholarship for $3,000, as well as grant applications , for up to $5,000. The scholarship is available to undergraduate students enrolled in a plastics manufacturing engineering program or other STEM-related career paths.

Form 105

Form Sourcing Manufacturing 105

Dinesh Mishra

FEBRUARY 21, 2023

To help you find the right direction, here are five key areas within manufacturing operations where AI can make a significant impact. Similar techniques can also be used to predict weak demand periods and slow down manufacturing to prevent spoilage of products and increased warehousing costs.

Value chain 116

Value chain Manufacturing Assembly Line Warehousing 116

Fastener News Desk

APRIL 7, 2024

SWDP), a manufacturer and installer of data center infrastructure for $115 million. SWDP’s offices and manufacturing facility are in San Bernardino, California and the company employs approximately 147 teammates. CHARLOTTE, N.C.

Manufacturing 52

Manufacturing Artificial Intelligence Sourcing Compliance 52

Additive Manufacturing

SEPTEMBER 8, 2022

have released the results of their collaborative multiphase research project on the “Future of Manufacturing.” The skills gap will only widen as manufacturing firms accelerate their digital transformation to Industry 4.0,” according to the “Future of Manufacturing” research report. business outcomes. UK, and Canada. About ASME.

Industry 4.0 98

Industry 4.0 Industry 4.0 Manufacturing Artificial Intelligence 98

Gary Mintchell

FEBRUARY 7, 2024

We appreciate and understand our users need for products and systems that integrate well together and allow for collaboration of edge and cloud data sources. The combination of PlantPAx and FactoryTalk DataMosaix provides a leading industrial Data Ops platform that supports OPC-UA, provides contextualization of data from multiple sources.

Automation 147

Automation Sourcing Manufacturing 147

Manufacturer's Monthly

FEBRUARY 5, 2024

This state-of-the-art measurement system is designed to set a new benchmark in quality control and assessment in plasterboard manufacturing. The laser scanners are sourced from Micro-Epsilon, which offers the highest accuracy and precision in its class. or call 03 9540 5100 to speak with one of their engineers.

Automation 52

Automation Manufacturing Benchmarking Sourcing 52

E&T

NOVEMBER 21, 2023

Using low-carbon energy sources, the UK could become a major centre for “midstream” refining processes for critical materials such as lithium. The government informed the committee that it plans to publish an advanced manufacturing plan in the Autumn Statement tomorrow, and that it is working on a UK battery strategy.

Manufacturing 75

Manufacturing Supply Chain Automotive Advanced manufacturing 75

Manufacturer's Monthly

JULY 10, 2023

“With the potential to create over 1,000 jobs this project will benefit Territorians from the Top End to the Barkly with the manufacturing plant to be built in Darwin, which will exclusively source phosphate from the Wonarah Phosphate Project in the Barkly.”

Manufacturing 73

Manufacturing Supply Chain Sourcing 73

Control Engineering

APRIL 27, 2023

Wireless insights IDTechEx believes 6G could be around by 2028 at the earliest and it has many potential benefits for consumers and manufacturers. This technique utilizes multipath information to reconstruct 2D images and 3D models of the environment, allowing for more reliable and accurate positioning services.

Manufacturing 97

Manufacturing Artificial Intelligence Function Composites 97