Fabricating & Metal Work

DECEMBER 20, 2022

A reduction in energy usage, lower carbon dioxide emissions, closed-loop recycling — and even customer demands regarding ethical material sourcing — are of critical importance in meeting goals. There are some very hard business benefits to pursuing this course and compliance fits into this as well,” Tate noted.

Industry 4.0 105

Industry 4.0 Industry 4.0 Compliance Supply Chain 105

Modern Machine Shop

JANUARY 30, 2025

Source: Mahr Inc. Obviously, there has to be some clearance between the plug body and the hole diameter so the plug can fit into the hole being measured, and control of this clearance is critical for the gage builder. Fixed-body plug gages are one of the best ways to measure hole diameters.

Automation 52

Automation Compliance Robotics Robotics 52

Gary Mintchell

SEPTEMBER 6, 2022

Andre Ristaino, Managing Director of ISA100 WCI: “As a standards-driven organization, the ISA100 Wireless Compliance Institute has been supporting the ISA100 Wireless (IEC 62734) standard with its core mission of assuring device interoperability.

Automation 130

Automation Industry 4.0 Industry 4.0 Compliance 130

Manufacturer's Monthly

SEPTEMBER 26, 2023

Importance of sustainability within the manufacturing industry Initially a compliance and reporting activity, sustainability has evolved into a strategic business imperative for manufacturers. This not only saves on energy costs but affords greater opportunity for alternative energy sources to be utilised in daylight hours.

Sourcing 98

Sourcing Value chain Manufacturing Compliance 98

i4.0 today

FEBRUARY 23, 2023

From the perspective of a food processor, the reasons broadly fit into three categories – improved production efficiency, waste reduction and regulatory compliance. A well-designed label verification system should be able to verify 100% of the data on 100% of the products against validated source production data.

Compliance 52

Compliance Food Production Automation Sourcing 52

Fabricating & Metal Work

NOVEMBER 16, 2024

The cassettes are fitted with inclined floor bars to ensure the material is placed in a defined position. Independently fire tested, FM 6050 approved, and UL and ULC listed, these safety cabinets ensure compliance with the most stringent safety regulations and quality standards for the storage of flammable liquids.

Lean manufacturing 52

Lean manufacturing Automation Compliance Logistics 52

Frost & Sullivan Manufacturing

SEPTEMBER 18, 2024

OM1’s innovative approach integrates multiple data sources into a cohesive, actionable dataset that enhances clinical decision-making and research effectiveness. Moreover, OM1’s dedication to quality and compliance ensures that its data solutions meet the industry’s most stringent standards.

Pharmaceutical 52

Pharmaceutical Compliance Artificial Intelligence Fit 52

Fabricating & Metal Work

OCTOBER 3, 2023

ProCube II is also a great solution for welders working in tight spaces or remote areas where traditional source capture is not possible or practical. Its small footprint makes it easy to fit wherever weld fume extraction is needed. Its small footprint makes it easy to fit wherever weld fume extraction is needed.

Fit 52

Fit Compliance Robotics Robotics 52

CMTC Manufacturing Tech

JUNE 15, 2023

Supplier Management How do you know if a supplier is a good fit for your company? A partner like CMTC can provide vital support for supplier sourcing, supplier development, and supply chain optimization for your business.

Supply Chain 84

Supply Chain Value chain Lead Time Compliance 84

Manufacturer's Monthly

MAY 27, 2025

Image Source: Starcom/Stock.adobe.com Implementing embedded edge security through confidentiality, integrity, and availability. This can be particularly problematic for open-source solutions because vulnerabilities in these solutions tend to be well-known and frequently exploited.

Compliance 64

Compliance Function Sourcing Fit 64

Canadian Manufacturing

NOVEMBER 2, 2023

The lab features: an electro-mechanical lab for actuator performance, motor, environmental and system testing; a wet lab for valve performance testing and valve/actuator wet accelerated life testing; and a fast prototype lab with 3D printing for assembly fit testing and creating prototypes on demand. Source: Business Wire

3D printing 40

3D printing Prototype  Compliance Fit 40

Automation Mag

JANUARY 9, 2024

Every industry will have to achieve this unified governance in the context of its own unique systems of record, data pipelines, and requirements for security and compliance. Generative AI adoption will not be one-size-fits-all, with each industry taking its own path. ”

Sourcing 49

Sourcing Compliance Fit Artificial Intelligence 49

Foley

OCTOBER 17, 2023

As it stands, the lack of uniformity among the various jurisdictions makes compliance challenging. 4 RTI International, “Characterizing PFAS Chemistries, Sources, Uses, and Regulatory Trends in U.S. 64890 (Sept. 20, 2023). 64890, 64892. and International Markets,” White Paper (Jun. 20, 2023). at ES-2, 3-2, 3-3 (Jun.

Apparel 52

Apparel Compliance Fit Electronics 52

Frost & Sullivan Manufacturing

MAY 3, 2023

The company listens to the needs of major manufacturers, designs its solutions to fit into their daily operations, and ensures its solutions comply with regulatory requirements and industry standards, thereby differentiating itself from other market players.

Compliance 52

Compliance Fit Sourcing Manufacturing 52

Frost & Sullivan Manufacturing

MAY 3, 2023

The company listens to the needs of major manufacturers, designs its solutions to fit into their daily operations, and ensures its solutions comply with regulatory requirements and industry standards, thereby differentiating itself from other market players.

Compliance 52

Compliance Fit Sourcing Manufacturing 52

MEM

JANUARY 5, 2023

Compliance with this standard requires measurement, quantification and reporting of the three scopes of greenhouse gas inventories. However, there are 15 different emission sources included in scope 3, as defined by the greenhouse gas protocol corporate reporting standard.

Freight 59

Freight Supply Chain Sourcing Cargo 59

i4.0 today

AUGUST 23, 2024

This framework is not just a one-size-fits-all, but it’s tailored to meet the specific operational requirements of modern businesses, ensuring compatibility and reassurance. Apica’s approach supports a broad spectrum of open-source agents, adapting swiftly to changing needs without requiring deep technical knowledge.

Sourcing 52

Sourcing Compliance Fit Automation 52

Frost & Sullivan Manufacturing

MARCH 27, 2024

Viasat Fleet Start & Advanced Solutions Source: Targa Telematics The May 2023 acquisition of Italian IoT info-telematics services provider, the Viasat Group, by Targa Telematics, a global market in IoT solutions and connected mobility, aligns with such needs.

Sourcing 59

Sourcing Artificial Intelligence Automotive Composites 59

Manufacturer's Monthly

MARCH 6, 2023

For example, roofing tiles that do not fit with each other or an extra layer of thickness of plasterboard. As such, manufacturers must implement rigorous quality control processes to ensure that their products are fit for purpose and meet the expectations of their customers.

Manufacturing 52

Manufacturing Fit Contact Sensors Compliance 52

ATS

SEPTEMBER 4, 2024

The PLC will have been sourced from a PLC manufacturer, the motors and drives from motor manufacturers and so on. For both the line and individual original manufacturer parts, OEMs are the prime source of knowledge and information regarding the equipment they made.

Manufacturing 52

Manufacturing Supply Chain Sourcing Prototype  52

Canadian Manufacturing

MAY 16, 2024

and Right Fit Foam Insulation Ltd., ” Since its start more than a decade ago, Yvon says they have been sourcing a wide range of products for its customers. TORONTO — GMS Inc., a North American specialty building products distributor and parent company to Canada GMS, Inc.,

Fit 52

Fit Sourcing Manufacturing Compliance 52

Frost & Sullivan Manufacturing

MAY 19, 2022

Additional benefits to the business are many, such as the ability to source employee talent located anywhere, leverage the insights of a diverse workforce, reduce real estate costs, and improve business continuity amid potentially disruptive events. Solution : New state-of-the-art business software is needed.

Compliance 52

Compliance Artificial Intelligence Fit Automation 52

Control Engineering

SEPTEMBER 26, 2023

Finding a viable approach to cybersecurity for OT is a lot like digital transformation, it requires buy in from all levels of a business, input from multiple sources and a collaborative approach that stays up to date with the latest products and services. Achieving a secure OT is an almost impossible task without expert help.

Industry 4.0 52

Industry 4.0 Industry 4.0 Compliance Fit 52

Fabricating & Metal Work

OCTOBER 20, 2022

31, 2022, anyone purchasing a qualifying Miller welding power source will receive a rebate of up to $300. Weld-Mask 2 ($50 rebate): Engineered for industrial environments, the Weld-Mask 2 allows users to seamlessly fit the LPR-100 half mask respirator and Classic safety glasses underneath for increased compliance.

Compliance 52

Compliance Fit Electronics Sourcing 52

Control Engineering

AUGUST 31, 2022

Inside a facility, the different data sources are included in the things that enable analytics. Inside the facility is multiple different data sources with a wealth of information that analytics needs to get and understand how to predict and support recommendations or show the issues requiring attention to improve.

Manufacturing Execution System (MES) 52

Manufacturing Execution System (MES) Cycle time Fit Compliance 52

ATS

DECEMBER 10, 2024

MRO procurement refers to the process of sourcing and managing all the items that you need for maintaining and repairing your equipment. Understanding the MRO procurement process Managing your MRO spend is in many ways no different from planning the strategic sourcing you use for your manufacturing activities.

Supply Chain 52

Supply Chain Sourcing Automation Compliance 52

Fabricating & Metal Work

NOVEMBER 8, 2023

This integrated fume extraction air-cooled torch offers the advantage of extracting fumes directly at the source while maintaining weld quality. ProCube II is also a great solution for welders working in tight spaces or remote areas where traditional source capture is not possible or practical.

Robotics 52

Robotics Robotics Function Sourcing 52

Fabricating & Metal Work

JANUARY 24, 2024

Part marking solutions, including those that use lasers in the production process, enhance efficiency and cost-effectiveness by aligning with sustainability goals by minimizing waste, improving energy efficiency, and ensuring compliance with industry regulations. s (McHenry, IL) Dot Peen Marker — manufactured in the U.S.

Function 52

Function Aerospace Compliance Fit 52

E&T

SEPTEMBER 7, 2022

Market regulator Securities and Exchange Board of India (SEBI), in compliance with the Companies Act 2013, made it compulsory to have at least one woman on a board from October 2014. While building an inclusive workplace, it’s also essential to source a diverse pipeline. Then spotting talent may be an art and an exercise as well.

Composites 40

Composites Compliance Fit Form 40

Fabricating & Metal Work

OCTOBER 4, 2022

The P-40 i A robot has a 1,300 mm reach and a 5 kg payload, while offering a compact arm design that fits into small work areas. High-Vacuum Source Capture Systems are one solution to combat the welder shortage. This system includes extraction of welding fumes using source capture ErgoMax MIG guns. www.fanucamerica.com.

Automation 52

Automation Robotics Robotics Fit 52

E&T

SEPTEMBER 8, 2022

I feel they are missing out on what could be a wealth of experience from people who don’t fit in their current remit. To demonstrate compliance with EU directives, manufacturers design their products to meet European standards. Frustrating. Ian Ansdell MIET. New era for UK standards lacks clarity. Can we capture carbon from boilers?

Fit 40

Fit Compliance Manufacturing Sourcing 40

Modern Machine Shop

APRIL 10, 2023

David Bassett, Senior Director of Quality and Continuous Improvement, Exports and Compliance : It killed me to take jobs and take everything over to China and teach those guys how to do things. So here's the story full circle, starting with David Bassett, Senior Director of Quality and Continuous Improvement, Exports and Compliance.

Made-to-spec 98

Made-to-spec Supply Chain Logistics Manufacturing 98

Fabricating & Metal Work

OCTOBER 2, 2024

The ESAB Cobot and an industrial robot with the new RoboFeed Edge robotic wire feeder, the new Aristo® Edge 500R power source, an automation gateway, a variety of torch options and dress kits for leading robotic systems. Ideal for precision welding applications up to 5/16” with tight fit-up and minimal gaps where high productivity is needed.

Robotics 52

Robotics Robotics Automation 3D printing 52

Fabricating & Metal Work

NOVEMBER 16, 2024

Lockout/Tagout Procedures: Make sure you have LOTO procedures for each piece of equipment with a disconnect and/or multiple energy source, that they’re up-to-date, and that your employees are well trained on these protocols. Ensure respirators are available properly fitted to your employees and that you schedule annual medical evaluations.

Sourcing 52

Sourcing Compliance Fit Manufacturing 52

Mold Making Technology

MARCH 3, 2024

Source (clockwise) | DMS, Lyndex-Nikken, SprutCAM and Hasco. Source | DMS 3D-Printed Hot Runner Nozzles Yield Consistent Temperature Profile Selective laser melting (SLM) metal 3D printing, combined with artificial intelligence (AI), produce DMS Monolith hot runner nozzles, tailored precisely to part and process specifications.

3D printing 52

3D printing Sourcing Artificial Intelligence Robotics 52

Gary Mintchell

OCTOBER 4, 2023

billion turnover in 2022, 168,000 employees, present in 75 countries), Saint-Gobain PAM has been the leading expert in water supply pipelines for more than 150 years and equips more than 100 capitals and 1,000 towns worldwide each year with its range of ductile iron pipes, fittings, joints and accessories. As part of this vast group (€51.2

Pharmaceutical 147

Pharmaceutical Function Automation Beverage 147

E&T

JUNE 14, 2023

Electronic engineering was her love, but sadly she hated the industry’s culture and felt she never fitted in. Most recently, Dinha co-founded OpenVPN, which provides an open-source VPN protocol. Shrouk had to wait seven years to gain refugee status and went to university straight after. The sky was then the limit.

Electronics 116

Electronics Sourcing Supply Chain Compliance 116