Manufacturer's Monthly

NOVEMBER 1, 2022

One of the most pertinent advantages of Schaeffler’s OPTIME – a wireless, online condition monitoring solution – is that once it has been installed, no one has to visit the site to collect or monitor data, says Motion Australia’s condition monitoring expert, Mark Slaughter. This tool gives us the ability to provide a full turnkey solution.

Automation 78

Automation Manufacturing 78

ATS

MARCH 8, 2024

This blog looks at the role of data collection sensors in modern manufacturing and how that data is stored and acted on. Sensor data collection In manufacturing, data is essential for process control and optimization and productivity and efficiency improvement. Data is only useful when it becomes actionable information.

Artificial Intelligence 52

Artificial Intelligence Automation Form Function 52

i4.0 today

MARCH 31, 2023

POLYN Technology today introduced VibroSense , a Tiny AI chip solution for vibration monitoring sensor nodes. The sensor node consumes a lot of electricity on vibration data transmission. VibroSense is the only analog neuromorphic solution on the market today that extracts vibration signal patterns at the sensor level.

Industry 4.0 52

Industry 4.0 Industry 4.0 52

Modern Machine Shop

DECEMBER 7, 2023

The difference, of course, is that canceling low-frequency sound waves in a tiny headphone speaker is one thing, while canceling frequencies on a vibrating spindle at the end of a 500-pound steel ram is something else entirely. Part of the three palletized multitasking portal machine line custom-built for a customer in the beverage industry.

Aerospace 98

Aerospace Automotive Beverage Electronics 98

Manufacturer's Monthly

AUGUST 9, 2023

So for the average plant or factory it can be difficult to collect from these in addition to the equipment used in their processing.” This platform can sit between the assets as a middleware, collecting data and informing as to the equipment’s performance,” he explains. “Yet these units can use a lot of energy.

Manufacturing 89

Manufacturing 89

Control Engineering

AUGUST 24, 2022

The age-old common practice of route-based vibration analysis can fail to provide sufficient early indication of problems because data is not collected continuously and not provided remotely or in real-time. As a result, these systems need to continuously collect and process vibration data.

Function 52

Function Industry 4.0 Industry 4.0 Manufacturing 52

Fabricating & Metal Work

SEPTEMBER 3, 2023

The cutting table can be equipped with dross collection under the grid and an independent chip collection system for recycling. Slag can be collected with raisable drawers or by Tecoi’s VIBRATIC® system. Fumes are extracted using Tecoi’s ECOTEC® filters and filtered dust is safely collected in the DUSTEC® system.

Fit 52

Fit Automation Manufacturing 52

Manufacturer's Monthly

MAY 24, 2023

Currently, Coertze says that while condition monitoring is widely used, there is a disconnect between the data collected by sensors and the workflow. Condition monitoring with vibration analysis is simply not enough – by the time vibration has started, it’s often already too late to intervene and save the machine.

Artificial Intelligence 52

Artificial Intelligence Automation Manufacturing 52

Manufacturer's Monthly

NOVEMBER 20, 2023

With condition monitoring, you’re using one parameter – such as vibration – to monitor the condition of your asset and it will provide you with a notification if something is going wrong, which can help prevent a catastrophic failure, but also means your asset is already damaged,” he clarifies. “On

Manufacturing 52

Manufacturing 52

Manufacturer's Monthly

NOVEMBER 14, 2023

With condition monitoring, you’re using one parameter – such as vibration – to monitor the condition of your asset and it will provide you with a notification if something is going wrong, which can help prevent a catastrophic failure, but also means your asset is already damaged,” he clarifies. “On

Manufacturing 52

Manufacturing 52

Manufacturer's Monthly

NOVEMBER 13, 2023

With condition monitoring, you’re using one parameter – such as vibration – to monitor the condition of your asset and it will provide you with a notification if something is going wrong, which can help prevent a catastrophic failure, but also means your asset is already damaged,” he clarifies. “On

Manufacturing 52

Manufacturing 52

E&T

DECEMBER 6, 2022

Through tactile collection sensors and tactile reproduction actuators, the device allows people to feel textures virtually without touching objects in reality. The telehaptic device works by being attached to the fingertip like a sticker and leverages the unique vibration pattern of touch and texture.

Composites 85

Composites Electronics Form 85

E&T

MARCH 23, 2023

These materials have the ability to convert ambient energy from various sources including light, heat, radio-frequency waves (like those from Wi-Fi and mobile signals), and mechanical vibrations.” However, in order to collect energy from ambient light, vibrations and radio-frequency waves, new materials will need to be developed.

Smart manufacturing 64

Smart manufacturing Sourcing Manufacturing 64

Manufacturer's Monthly

MARCH 18, 2024

The tough aluminium chassis provides protection against vibration and shock. With its range of I/O interfaces, the ACS-500 can easily perform all tasks required throughout the production process, including real-time data collection, remote monitoring and process control. It features 4 x USB 3.0,

Electronics 78

Electronics Process control Automation Manufacturing 78

Manufacturer's Monthly

AUGUST 7, 2023

Currently, while condition monitoring is widely used, there is a disconnect between the data collected by sensors and the workflow, says Coertze. Condition monitoring with vibration analysis is simply not enough – by the time vibration has started, it’s often already too late to intervene and save the machine.

Artificial Intelligence 52

Artificial Intelligence Manufacturing Automation 52

ATS

JANUARY 5, 2024

Condition-based maintenance (CBM) is a proactive strategy that involves real-time monitoring of machine conditions or parameters (such as vibration and temperature) to decide when maintenance should be performed. You have machines whose performance can be effectively tracked using variables such as temperature, vibration and pressure.

Artificial Intelligence 59

Artificial Intelligence Function Manufacturing 59

i4.0 today

DECEMBER 1, 2022

Through textile and pressure sensors inserted in a sock or shoe, Sensoria powered IoMe (Internet of Me) wearables collect data on the physical activity of gait-impaired patients to improve their lives. For more information, contact Sensoria Health at Info@Sensoriahealth.com , website: www.sensoriahealth.com and www.sensoria.io.

Artificial Intelligence 105

Artificial Intelligence Industry 4.0 Industry 4.0 105

Modern Machine Shop

MAY 21, 2023

Shown here is a spindle with VibePro Tect installed, three-axis sensor and wireless transmitter which transmits collected data to the web app. Photo Credit: GTI Spindle Setco , a subsidiary of Holden Industries, has acquired the assets of GTI Spindle Technology. Setco and GTI are the two largest U.S.

Manufacturing 52

Manufacturing 52

MEM

SEPTEMBER 19, 2023

AI monitors aircraft engines in real time, collecting data on temperature, pressure, vibration, and more. AI continuously monitors energy usage and production processes, collecting data on temperature, pressure, and machine performance. Advanced algorithms analyze this data to predict maintenance needs with remarkable precision.

Manufacturing 98

Manufacturing Pharmaceutical Assembly Line Supply Chain 98

ATS

APRIL 21, 2022

These sensors are generally used for: Temperature monitoring Vibration monitoring Leak detection (such as gas leaks) Process monitoring and modeling Performance data monitoring and collection, and the enablement of data analysis. Which Industries Use IIoT Sensors? Sensor Technology From ATS.

Automotive 52

Automotive Aerospace Manufacturing Function 52

Fabricating & Metal Work

JANUARY 17, 2023

We can monitor spindle speed, see excessive vibrations, and monitor the heat generated specifically in the bearings area of each component. “So They shut them down if they exceed predetermined vibration levels, record the events of crashes, and most importantly, store this data to predict the life of spindles. Old habits die hard.

Industry 4.0 52

Industry 4.0 Industry 4.0 Manufacturing 52

ATS

NOVEMBER 15, 2023

Vibration analysis Vibration analysis is a powerful tool in predictive maintenance capable of diagnosing potential faults in machinery before they lead to catastrophic failures. By using machine learning, the data derived from vibration monitoring can be analyzed in greater detail.

Artificial Intelligence 52

Artificial Intelligence Industry 4.0 Industry 4.0 Smart manufacturing 52

E&T

FEBRUARY 15, 2023

Using this, a player can create custom controller profiles, mapping the buttons, adjusting sticks and triggers zone, configuring the vibration level of the rumble motors and so forth. It's all these small, subtle improvements that add up collectively to a superior gaming experience.

52

52

Manufacturer's Monthly

APRIL 19, 2023

Whether it is to collect data from existing systems, or sending data or notifications north bound to overarching platforms like SCADA. moneo edge connect has the ability to easily collect and push data to other systems,” he said. temperature, flow, vibration, current consumption) on an ongoing basis.

Artificial Intelligence 87

Artificial Intelligence Compliance Industry 4.0 Industry 4.0 87

ATS

MARCH 26, 2024

Vibration: Changes in the vibration signature of rotating equipment like fans, pumps and motors often signal the onset of wear or other deterioration. Wide-area, non-contact thermal imaging is used for checks on motor windings, gearbox operation and electrical cabinets.

Beverage 59

Beverage Pharmaceutical Warehousing Function 59

Control Engineering

DECEMBER 3, 2022

Interstates developed a complete control system, drawing packages, network design and implementation, data collection and enterprise resource planning (ERP) integration for a flour mill. The goal was to improve product quality, maximize equipment and employee efficiency, all through automation and data collection.

Enterprise Resource Planning (ERP) 52

Enterprise Resource Planning (ERP) Automation Electronics Beverage 52

Fabricating & Metal Work

AUGUST 18, 2023

Environment flexibility Shop floors have many different environmental factors — ambient vibration, changing temperatures, debris, dust, oil and water — and many shop floor CMMs combat that with specialized technology. As an example, some CMMs are made with optimal user experience (UX) in mind so that there is operator flexibility.

Compliance 52

Compliance Aerospace Fit Automotive 52

Fabricating & Metal Work

NOVEMBER 5, 2022

It features a heavy, all-steel tube frame that ensures durability and makes it more rigid, which reduces vibration and improves routing quality. We’ll also be running our 3000 Series CNC Plasma table,” said Russell, “with its sturdy all-steel plate frame that easily supports any standard or high-definition plasma unit.

Form 52

Form Manufacturing 52

Fabricating & Metal Work

JUNE 5, 2023

With its integrated CPU, the TWIIST collects and analyzes operational data and provides a feedback loop to ensure equipment performance is optimized and operators are kept safe.

Bill of Materials 52

Bill of Materials Supply Chain Electronics Manufacturing 52

Infinite Uptime

JUNE 16, 2022

Real-time Data Collection, Analysis, and Alerts. IIoT-based condition monitoring systems collect real-time data from all the machinery and analyse and assess them according to the recommended performance levels. After analyzing, if it detects any issue, it quickly notifies the possible reasons. So, industrial revolution 4.0

Industry 4.0 52

Industry 4.0 Industry 4.0 Supply Chain Manufacturing 52

Control Engineering

AUGUST 9, 2023

Explore how data collection, analysis and filtering will help at multiple locations. Data collection, analysis and filtering will multiple locations of Neom water projects. The software collects and analyzes data for leak detection and leak location across the pipeline every 10 m.

Automation 52

Automation Sourcing Manufacturing 52

Additive Manufacturing

JANUARY 20, 2023

While dimensionally precise, parts made from photopolymer resin were not an ideal match for the requirements of space flight due to their lack of resistance to vibrations, low temperatures, and heat.

3D printing 52

3D printing Additive manufacturing Manufacturing 52

Control Engineering

FEBRUARY 7, 2023

Today, we are seeing the ongoing integration of electronics creating smart devices integrating software apps, data collection, network communications and embedded machine learning diagnostics for predictive maintenance, improved quality, and energy reduction.

Electronics 97

Electronics Automation Process manufacturing Manufacturing 97

Fabricating & Metal Work

JUNE 6, 2023

With its integrated CPU, the TWIIST collects and analyzes operational data and provides a feedback loop to ensure equipment performance is optimized and operators are kept safe. These magnetoelectronic signals can also monitor process information related to vibration peaks, hours of operation, distance traveled, and more.

Supply Chain 52

Supply Chain Bill of Materials Process control Electronics 52

Control Engineering

MAY 6, 2023

Courtesy: Otek Corporation 10 ways to replace digital meters Consider these methods when replacing analog meters so the process can be simplified and it’s easier to collect and gather data. All of the above was possible with plugin modules and jumpers to meet shock & vibration requirements per military specs.

Made-to-spec 59

Made-to-spec Compliance Automation Manufacturing 59

E&T

SEPTEMBER 2, 2022

The wider slots could fit the triple heavyweight vinyl of Radiohead’s glorious reissue ' OK Computer OKNOTOK 1997 2017 ', the fattest album in this writer's collection. A good plan for when you’ve exhausted your vinyl collection but want to keep on listening. It’s also a favourite album and it sounded good on the Victrola.

Fit 45

Fit Form Sourcing 45

Manufacturer's Monthly

SEPTEMBER 7, 2022

You collect parameters at the bottom, from the factory floor and put it into Moneo. temperature, flow, vibration, current consumption) on an ongoing basis. We help customers build a budget and a scope to help them sell it internally.”. To conclude the explanation of Moneo, Coertze explains the tool acts as ‘middleware.’.

Bottleneck 87

Bottleneck Industry 4.0 Industry 4.0 Value chain 87