Fabricating & Metal Work

APRIL 19, 2023

RoboVent’s Senturion’s modular design offers a dust collection system that can be adapted for virtually any dust or fume collection application. Manufacturers working with combustible metal dusts must have an NFPA-compliant dust collection system.

Compliance 52

Compliance Manufacturing 52

E&T

MAY 26, 2023

The trial used a variety of air and ground vehicles to test AI capabilities in target identification. US senior adviser to the secretary of defence for Aukus, Abe Denmark, said: “We recognise the immense importance of this collaboration in strengthening our collective national security of our nations.

Artificial Intelligence 111

Artificial Intelligence 111

Modern Machine Shop

MARCH 24, 2024

Prior to the decision to acquire this stake in the company, WinTool and Toolbase were introduced in the company’s own production facilities and tested in continuous use. This enables Haimer to offer and distribute both product lines to its worldwide distribution partners and customers.

Fit 52

Fit Sourcing Automation 52

E&T

OCTOBER 27, 2022

R&D laboratory Sandia National Laboratories tested the hypersonic weapon components from Nasa’s Wallops Flight Facility in Virginia on Wednesday 26 October. The launch today went extremely well,” said Vice Admiral Johnny Wolfe, the director of strategic systems programmes, who oversaw the test.

Prototype  49

Prototype  Electronics Aerospace 49

AU Manufacturing

MAY 3, 2023

Waste and recycling specialist REMONDIS Australia is set to put one of the first zero-emission waste collection trucks through a trial run as part of its commercial operations. It is a big step to invest in putting a zero-emission waste collection truck to the test in a commercial setting.

Manufacturing 66

Manufacturing 66

E&T

JUNE 16, 2023

Everyday items, from fridges to street lamps, are connected to the internet as part of the Internet of Things (IoT), and many of them are equipped with sensors that collect data," said Fumio Narita, co-author of the study and professor at Tohoku University. The CFRP served as both an electrode and a reinforcement substrate.

Composites 105

Composites Function Electronics 105

AU Manufacturing

MAY 6, 2023

In the research, the sweat samples from the skin were initially collected using absorbent pads or microbore tubes for sweat analysis. The scientists said the method requires specialised handling, skilled workers, and pricey laboratory equipment. The findings were published in the journal Sciences Advances on 3 May.

3D printing 52

3D printing Additive manufacturing Manufacturing 52

Fabricating & Metal Work

OCTOBER 2, 2023

ABB Robotics has released its new modular OptiFact software platform, which streamlines data collection, visualization, and analysis in automated production facilities. Once deployed, OptiFact simplified data collection and the visualization of key performance indicators such as cycle time and Programmable Logic Controller (PLC) alarms.

Cycle time 52

Cycle time Robotics Robotics Artificial Intelligence 52

Gil Automation

SEPTEMBER 7, 2023

With a solid reputation for excellence and innovation, Metrix Vibration is a name synonymous with top-quality industrial vibration monitoring equipment. Premier Industrial Shakers: Test and calibrate your machinery with precision using Metrix's industrial shakers. These shakers ensure accuracy and reliability in your testing processes.

Automation 52

Automation 52

Canadian Manufacturing

DECEMBER 21, 2022

Our ESG teams have worked intensely to ensure the communities of Itinga and Araçuaí have been concomitantly lifted through Sigma’s transformative new social initiatives: allocating funding to build 2,000 rainwater collection systems and to empower 10,000 women through microcredit.” 3, 4 and 6.

Manufacturing 52

Manufacturing 52

SMMT

MARCH 30, 2023

Enfield Council has begun operating its first fully electric refuse vehicle, the 26-tonne Renault Trucks E-Tech D Wide, following its “high performance and reliability” during prototype testing on the streets of North London. The post London council collects first electric refuse truck appeared first on SMMT.

Prototype  40

Prototype  40

MEM

SEPTEMBER 12, 2023

Another major milestone has been reached for the Challenger 3 (CR3) Programme with the 120mm smoothbore gun test firings successfully completed. Following production, the smoothbore guns have been tested and validated prior to delivery to Rheinmetall BAE Systems Land (RBSL) in Telford for integration with the new digital turret.

Prototype  98

Prototype  Form Manufacturing 98

Fabricating & Metal Work

APRIL 14, 2023

This involves recording and analyzing an array of the physical signals emitted which requires not only high-resolution sensors to collect them (the duration of the weld can be on the order of milliseconds), but also an infrastructure to export and analyze copious amounts of data. Let’s take a closer look at the importance of resolution.

Artificial Intelligence 97

Artificial Intelligence Sourcing Fit Manufacturing 97

Canadian Manufacturing

MAY 30, 2023

Hillcrest announces the successful completion of dynamic load bench tests involving Hillcrest’s 250-kilowatt, 800-volt SiC inverter with a prominent European Automotive Original Equipment Manufacturer (European OEM). This test phase will then be followed by system testing with Hercules’ electric powertrain.

Automotive 52

Automotive Manufacturing Compliance 52

E&T

JUNE 29, 2023

We've had the Quadriga on test, mostly because we have hundreds of CDs that have been sitting in a cupboard for far too long, their only compatible player in these modern times now being the car stereo. Delving back into the collection in a domestic situation has been quietly thrilling - and the Quadriga sounds really good.

Function 97

Function Form Sourcing 97

Modern Machine Shop

NOVEMBER 16, 2023

CNC equipment of vertical/horizontal milling and turning solutions for high-speed, die/mold, heavy duty, multi-axis, multitasking and high-volume machining solutions across various FFG brands, including MAG, SMS, Feeler, Leadwell and FFG DMC were showcased. . Eighteen machines were displayed, performing live cutting demonstrations.

Warehousing 52

Warehousing Cycle time Robotics Robotics 52

E&T

NOVEMBER 9, 2022

‘Blue Harvesting’ - a collaboration between five European countries - has designed a way to collect rare metals from the bottom of the ocean. . The sea floor boasts one of the world’s largest untapped collections of rare-earth elements, including copper, manganese, nickel and cobalt — materials crucial for accelerating the energy transition.

49

49

Canadian Manufacturing

SEPTEMBER 28, 2023

The EV Star is Altoona tested with the highest score of 92.2 The EV Stars deployed in Boston have the maximum seating configuration of 20, including the driver, and are equipped with bike racks as the ideal solution for truly integrated transportation. in its class.

Cargo 52

Cargo Manufacturing 52

Frost & Sullivan Manufacturing

FEBRUARY 7, 2023

07, 2023– Improved safety requirements across industries will drive the non-destructive testing (NDT) equipment market, inflating the demand for integrated software, according to Frost & Sullivan’s recent analysis of the global NDT software industry. The NDT testing software market is expected to reach $853.7 Industry 4.0

Industry 4.0 52

Industry 4.0 Industry 4.0 Artificial Intelligence Robotics 52

Gil Automation

APRIL 3, 2023

Wet calibration involves using a calibrated container to collect the liquid flow from the meter, while dry calibration involves the use of a secondary reference meter to compare the readings from the primary flow meter. Prepare the calibration equipment: Depending on the calibration method chosen, the necessary equipment must be prepared.

Compliance 52

Compliance Manufacturing 52

Control Engineering

DECEMBER 3, 2022

Interstates developed a complete control system, drawing packages, network design and implementation, data collection and enterprise resource planning (ERP) integration for a flour mill. The goal was to improve product quality, maximize equipment and employee efficiency, all through automation and data collection.

Enterprise Resource Planning (ERP) 52

Enterprise Resource Planning (ERP) Automation Electronics Beverage 52

Canadian Manufacturing

FEBRUARY 9, 2024

The assistance provided will focus on the cost of acquiring equipment and installing, testing, and commissioning this unit. BOSK Bioproducts is an SME based on the model of a circular economy to collect industrial waste, such as bio-sludge from paper manufacturing, and convert it into compostable bioplastics.

Supply Chain 40

Supply Chain Manufacturing 40

E&T

DECEMBER 19, 2022

The coral had been collected from the reef for the trial, which coincided with the brief annual spawning window. "If Research volunteers collect coral spawn from Great Barrier Reef coral, at the Australian Institute Of Marine Science, Sea Simulator in Townsville, Australia / Reuters / Jill Gralow. Image credit: REUTERS/Jill Gralow.

3D printing 105

3D printing Artificial Intelligence Manufacturing 105

ATS

FEBRUARY 20, 2023

Condition Monitoring — the practice of drawing upon data from maintenance sensors in order to identify potential problem states for equipment as early as possible — has seen immense impacts from AI, analyzing data in innovative ways to not only detect potential issues even earlier, but also to help identify new troubleshooting scenarios and metrics.

Artificial Intelligence 98

Artificial Intelligence Manufacturing Pharmaceutical Automation 98

Control Engineering

DECEMBER 9, 2022

Instead, they wanted their prototype, the Triton-C, to eliminate energy capture and conversion inefficiencies present in the other WECs being tested so their system could be used for utility-scale energy production in the future. Oscilla did not just want to create a WEC that could convert waves to electricity.

Prototype  52

Prototype  Function Sourcing Fit 52

Manufacturer's Monthly

DECEMBER 12, 2022

LINAK’s new I/O interface has a wealth of configurable monitoring and diagnostic functions built in, which can enable you to optimise the performance of your equipment and quickly and easily troubleshoot in the event of issues occurring. This historical data can be read out and provides in-depth knowledge about performance over time.

Function 90

Function Manufacturing 90

Robotics Business Review

FEBRUARY 10, 2024

The team has had promising results with its tests. The CMU team has equipped them with a module that has a spinning nozzle. In addition, the team is collecting data that it plans to use to build a machine-learning algorithm to be able to assess damage on its own. The reality is in 50 years, we’re not going to have pipes.”

Robotics 139

Robotics Robotics Artificial Intelligence Sourcing 139

Manufacturer's Monthly

AUGUST 9, 2022

Welding equipment upgrades from BOC has seen the iconic Australian boat manufacturer, Telwater, deliver quality results and improve on training. In manufacturing multiple boats per day often to tight deadlines, the team at Telwater relies heavily on welding equipment and gases to deliver high quality aluminium welds. “If

Manufacturing 90

Manufacturing 90

AU Manufacturing

OCTOBER 12, 2022

It analyses data collected throughout the brew to precisely control both the boiling and fermentation processes at the heart of beer production. technology is about smart automation and the use of robotic systems equipped with machine learning algorithms. Brewery as a test facility. The UTS Industry 4.0 The UTS Industry 4.0

Industry 4.0 89

Industry 4.0 Industry 4.0 Artificial Intelligence Supply Chain 89

Canadian Manufacturing

JANUARY 17, 2023

“Our remote, proactive fiber testing and monitoring solution provides complete visibility across the fiber network, with capabilities to predict and detect potential outages in real time. Coupled with weather sensing equipment, we can help ensure network reliability so the lights stay on for everyone.”

Manufacturing 52

Manufacturing 52

i4.0 today

DECEMBER 7, 2023

This ensures customers get Internet of Things (IoT) solutions up and running quickly with hardware and software that has been pre-tested and verified to work with Azure IoT services. The UNO-2000 V2 series is also equipped with extensive IO ports, accepting cutting-edge technologies like M.2

Automation 52

Automation Fit Form Industry 4.0 52

i4.0 today

AUGUST 9, 2023

The successful deployment of the Elios 3 drone equipped with a LiDAR sensor marks a major milestone for the Unmanned Aerial Vehicle (UAV) team, enabling Sellafield Ltd to achieve unparalleled efficiency in mapping and 3D modelling. There is significant testing to do before we can have confidence in the readings.

3D printing 52

3D printing Industry 4.0 Industry 4.0 Aerospace 52

Fabricating & Metal Work

NOVEMBER 7, 2023

This involves recording and analyzing an array of the physical signals emitted which requires not only high-resolution sensors to collect them (the duration of the weld can be on the order of milliseconds), but also an infrastructure to export and analyze copious amounts of data. Let’s take a closer look at the importance of resolution.

Artificial Intelligence 52

Artificial Intelligence Sourcing Fit Manufacturing 52

E&T

JULY 6, 2023

Volcanic eruption in Spain/ IGME (Instituto Geologico y Minero de Espana) Image credit: IGME (Instituto Geologico y Minero de Espana) This innovative method to analyse volcanic lava was tested by the team on samples collected during the damaging 2021 eruption on the Canary Island of La Palma, which lasted 85 days.

98

98

Control Engineering

AUGUST 31, 2023

Implementing a successful MPC project in the F&B industry requires a systematic approach encompassing clear objectives, thorough assessment, vendor selection, implementation, testing and continuous monitoring. Once the objectives are clear, identify the specific processes and equipment to be included in the project scope.

Beverage 52

Beverage Benchmarking Process control Function 52

AU Manufacturing

DECEMBER 19, 2022

Fabric recycling startup Worn Up has ventured into a partnership with Australia’s national science agency CSIRO to test and improve its efforts to turn old faded uniforms into pieces of furniture. . Worn Up was established in 2020 as part of the same mission to collect old uniforms from institutions across the country. .

Manufacturing 86

Manufacturing 86

Mold Making Technology

OCTOBER 10, 2023

You need to assess all aspects to determine if your machinery, equipment and people are capable of automation. Things to ask yourself: Is your equipment old? Once your capabilities assessment is complete, you must make an investment plan for the required equipment and technology and work to standardize your tooling operations.

Automation 111

Automation Enterprise Resource Planning (ERP) Manufacturing Execution System (MES) Benchmarking 111