i4.0 today

JANUARY 9, 2024

Critical Manufacturing, a pioneer in future-ready, multi-site manufacturing execution systems (MES) and a subsidiary of ASMPT, has been listed in the Deloitte ‘Technology Fast 50’ , reflecting the innovation and success of its MES solutions. Critical Manufacturing’s success has come from a series of innovations in MES technology.

Manufacturing Execution System (MES) 52

Manufacturing Execution System (MES) Composites Manufacturing Electronics 52

i4.0 today

DECEMBER 6, 2023

The engineering team at ByteSnap Design has been reflecting on the future of AI in the technology and electronics design industries. Here is the team’s forecast for the pivotal AI trends likely to emerge during 2024 to redefine industry standards and drive forward a new age of technological excellence. Today Magazine.

Electronics 52

Electronics Artificial Intelligence Supply Chain Automation 52

i4.0 today

SEPTEMBER 23, 2022

Mitsubishi Electric is showcasing how its automation technologies can drive the entire electric vehicle value chain forward at the North East Automotive Expo 2022, taking place on 29th September 2022. The post Mitsubishi Electric’s Support for the Automotive Industry Highlighted at the North East Automotive Expo appeared first on i4.0

Automotive 52

Automotive Automation Electronics Value chain 52

i4.0 today

MAY 25, 2023

Critical Manufacturing, the provider of innovative, future-ready Manufacturing Execution Systems (MES), announces its partnership with L&T Technology Services Limited (LTTS), a leading Engineering and R&D services company headquartered in India. Director, Head of Manufacturing Service, Danfoss Group IT.

Smart manufacturing 52

Smart manufacturing Manufacturing Execution System (MES) Manufacturing Industry 4.0 52

i4.0 today

APRIL 27, 2023

Infineon Technologies AG (FSE: IFX / OTCQX: IFNNY) and Schweizer Electronic AG (ETR: SCE) are collaborating on an innovative way to further increase the efficiency of chips based on silicon carbide (SiC). Both partners are developing a solution to embed Infineon’s 1200 V CoolSiC chips directly onto printed circuit boards (PCB). Together.”

Automotive 52

Automotive Electronics Industry 4.0 Industry 4.0 52

i4.0 today

APRIL 18, 2024

The University of Wolverhampton (UK) and 3D printing global leaders EOS , and AMCM , have today announced they will join forces to launch a new UK Centre of Excellence for Additive Manufacturing (AM). Nathan Rawlings, Sales Manager at EOS UK , said: “The UK manufacturing sector has always pushed forward and embraced innovation.

Additive manufacturing 59

Additive manufacturing 3D printing Manufacturing Artificial Intelligence 59

Manufacturing Tomorrow

NOVEMBER 16, 2022

-Actionable data insights ignite major innovations in automotive, consumer devices, data centers and connected healthcare applications -Artificial intelligence, AR/VR, digital twins, sensors and machine learning enriched by proliferation of new data sources -Increased investments in edge computing and Industry 4.0

Artificial Intelligence 40

Artificial Intelligence Industry 4.0 Industry 4.0 Electronics 40

Automation Mag

NOVEMBER 14, 2023

Beginning this academic year, students in Seneca’s Faculty of Applied Science & Engineering Technology will benefit from a Siemens donation of a sophisticated virtual reality (VR) manufacturing simulation kit and 25 seats of Tecnomatix from the Siemens Xcelerator portfolio of industry software.

Industry 4.0 62

Industry 4.0 Industry 4.0 Aerospace Electronics 62

i4.0 today

JUNE 28, 2023

Since the protection of customer and supplier data is becoming increasingly important for GOEPEL electronic, we have implemented and successfully completed the TISAX® assessment. For GOEPEL electronic GmbH, confidentiality, availability and integrity of information have a high value.

Electronics 52

Electronics Automotive Function Manufacturing 52

Robotics Business Review

JANUARY 9, 2024

based company said its latest systems deliver performance, safety, and flexibility for the medical device, electronics, and consumer electronics markets. GX10B and GX20B built for high payloads, throughput Epson Robots said it has engineered the new GX-B models to help users easily develop automation for demanding manufacturing tasks.

Robotics 100

Robotics Robotics Industry 4.0 Industry 4.0 100

i4.0 today

SEPTEMBER 4, 2023

Application areas include automotive, tire manufacturing, food and beverage, packaging and metalworking. It offers event-based and I/O mapped diagnostics – both important predictive maintenance requirements for Industry 4.0 and Industrial Internet of Things (IIoT) applications. IIoT application requirements.

Industry 4.0 52

Industry 4.0 Industry 4.0 Electronics Beverage 52

MEM

SEPTEMBER 1, 2023

Application areas include automotive, tire manufacturing, food and beverage, packaging and metalworking. It offers event-based and I/O mapped diagnostics – both important predictive maintenance requirements for Industry 4.0 and Industrial Internet of Things (IIoT) applications. IIoT application requirements.

Industry 4.0 52

Industry 4.0 Industry 4.0 Electronics Beverage 52

i4.0 today

OCTOBER 7, 2022

As one tier one EMS executive with twenty years of manufacturing experience explained, “ the core of Industry 4.0 The same executive went on to say that they expected to deploy the solution globally starting with all the high reliability sites that made products for the automotive industry. About Cybord.

Supply Chain 90

Supply Chain Industry 4.0 Industry 4.0 Artificial Intelligence 90

Automation Mag

APRIL 17, 2023

Advances in automation technologies are transforming the industrial manufacturing landscape. Broadly termed “digital transformation,” these smart manufacturing initiatives bring physical and cyber systems together for greater performance, efficiency, sustainability and safety. 2022 was no different.

Automation 120

Automation Robotics Robotics Automotive 120

i4.0 today

AUGUST 10, 2022

Panasonic Factory Solutions, a division of Panasonic Connect Europe and a leading company in Industry 4.0, and Detech, a leading international technical distributor of high-tech equipment for the manufacture of electronic products, have today announced a distribution collaboration. About Panasonic Group.

Electronics 52

Electronics Industry 4.0 Industry 4.0 Automation 52

HGR Inc.

NOVEMBER 18, 2022

According to a widely cited industry figure from Deloitte, in their report on smart factories, even during the best of times – before COVID caused disruption – unplanned downtime costs industrial manufacturers an estimated $50 billion annually. Manufacturing Tomorrow | Nov 14, 2022 | Manufacturing Tomorrow.

Manufacturing 79

Manufacturing Supply Chain Industry 4.0 Industry 4.0 79

Manufacturer's Monthly

OCTOBER 24, 2022

Elexon Electronics is forging its future in the defence space via extraordinary innovation. Manufacturers’ Monthly speaks with co-owner Leigh Bateman about the company’s sensor technologies and a range of products for niche local and export markets. manufacturing facility as part of its defence-readiness program. RFID readers.

Electronics 66

Electronics Industry 4.0 Industry 4.0 Aerospace 66

i4.0 today

AUGUST 29, 2022

It doesn’t matter whether the topic is automotive electrification or e-mobility, climate change or sustainability. At the K, the M&M team will display new developments in more sustainable solutions, automotive electrification and e-mobility, robotics, consumer electronics, sporting goods, footwear, and more. . E-mobility

Electronics 96

Electronics Automotive Robotics Robotics 96

i4.0 today

JANUARY 15, 2024

In mechanical engineering, especially in the production of components for key industries such as aerospace and automotive engineering, constant innovation and adaptability are required. This is all the more important when it comes to maintaining high quality standards while utilising costs and resources efficiently. Today Magazine.

Manufacturing 52

Manufacturing Aerospace Automotive Industry 4.0 52

Manufacturer's Monthly

AUGUST 31, 2022

Attracting a quality workforce is one of the most difficult challenges among manufacturers right now, and businesses in Australia and New Zealand are facing the brunt of the skills gap, new data shows. As manufacturing software becomes more sophisticated, production is restored to its pre-pandemic state and advancements in Industry 4.0

Manufacturing 77

Manufacturing Supply Chain Industry 4.0 Industry 4.0 77

i4.0 today

APRIL 24, 2023

As a TactoTek licensee, TracXon Solutions will design and build IMSE functional films, integrating TactoTek’s design rules to enable the supply of functional films for the development of next-generation automotive platforms with smart surfaces. For more information, please visit tactotek.com.

Supply Chain 52

Supply Chain Function Electronics Additive manufacturing 52

i4.0 today

OCTOBER 18, 2023

Infineon will build and reserve manufacturing capacity to supply SiC as well as Si power modules and chips to Hyundai/Kia until 2030. As a trusted partner, we are proud to advance our long-term partnership with Hyundai/Kia,” said Peter Schiefer, President of Infineon’s Automotive Division. “We Today Magazine.

Automotive 52

Automotive Electronics Manufacturing Industry 4.0 52

i4.0 today

NOVEMBER 9, 2022

Time and costs are decisive factors in the production process of electronic assemblies. FlashFOX is a stand-alone production programmer, so a compact unit that focuses solely on the programming of electronic assemblies. GOEPEL electronic is divided into four business units: – Automotive Test Solutions.

Electronics 52

Electronics Automotive Function Industry 4.0 52

Manufacturer's Monthly

JUNE 7, 2023

Already established as a global electronics player, Elexon Electronics is undergoing an agile transformation to strengthen its defence offering. Manufacturers’ Monthly investigates the skills and training initiatives the Australian company is putting in place to grow its presence in major defencen projects. interconnectedness.

Lean manufacturing 83

Lean manufacturing Electronics Prototype  Industry 4.0 83

i4.0 today

FEBRUARY 22, 2024

Sebastien will sharpen Macnica’s vertical focus across key North American businesses including AV, Broadcast, AI, Automotive, Industrial Applications and Security, with an emphasis on building a stronger foundation for overall business growth. is the North American division of Macnica Fuji Electronics Holdings, Inc. ,

Automotive 52

Automotive Electronics Automation Manufacturing 52

Fabricating & Metal Work

MARCH 18, 2023

RADAR detects movements in line of sight, whereas LiDAR detects physical objects Industry 4.0 Simplified Lastly, we’re busting myths about industry 4.0 Many believe that you can’t benefit from Industry 4.0 Modern-day manufacturing is all about digitization, which means converting existing information (e.g.,

Industry 4.0 52

Industry 4.0 Industry 4.0 Logistics Beverage 52

i4.0 today

APRIL 23, 2024

Mercedes-Benz Mercedes-Benz, a globally recognized automotive manufacturer, is renowned for its innovative technology, craftsmanship, and luxury design. At their state-of-the-art automotive factory in Ludwigsfelde, over 70 AGVs move automotive parts to the assembly line.

Automotive 52

Automotive Assembly Line Cargo Fit 52

i4.0 today

OCTOBER 6, 2023

While industrial robots were traditionally used mainly in the automotive and electronics industries, they have now become prevalent in many other industries, including food and beverage, pharmaceuticals, aerospace and plastics.

Robotics 52

Robotics Robotics Pharmaceutical Beverage 52

Dinesh Mishra

DECEMBER 29, 2023

In 2023, Meshmix Media witnessed significant success and growth, driven by the launch of impactful initiatives such as ‘Breaking Bread with DMI,’ compelling industry webinars, and engaging conferences, not only strengthened our industry presence but also underscored our commitment to fostering innovation and knowledge exchange.

3D printing 52

3D printing Industry 4.0 Industry 4.0 Form 52

i4.0 today

FEBRUARY 8, 2024

the colorants and functional materials division of the artience group (formerly Toyo Ink Group of Japan), announced today that its LIOACCUM conductive carbon nanotubes (CNT) dispersions manufactured have been adopted as a conductive additive for use in lithium-ion batteries (LiBs) produced by Primearth EV Energy Co., Toyocolor Co.,

Function 52

Function Automotive Electronics Manufacturing 52

i4.0 today

AUGUST 30, 2023

Indium Corporation ® is proud to showcase its proven products and expertise for the rapidly evolving electric vehicle manufacturing and e-Mobility market at The Battery Show , September 12-14, in Novi, Michigan.

Electronics 52

Electronics Automotive Sourcing Manufacturing 52

Fabricating & Metal Work

AUGUST 26, 2022

As ready-to-use automation, the LBR iisy quickly and easily integrates into any manufacturing application from pre-defined production processes to open, unstructured work environments with unpredictable conditions from one job to the next. The LBR iisy is fully embedded into the KUKA Industry 4.0 www.kuka.com.

Automation 52

Automation Industry 4.0 Industry 4.0 Robotics 52

i4.0 today

MARCH 2, 2023

Due to their wide range of uses in consumer electronics, automobiles, medical devices, and other products, semiconductors are in high demand worldwide. To meet this demand, semiconductor manufacturers are increasing their production capacity and implementing semiconductor robots for a better result.

Robotics 52

Robotics Robotics Electronics Aerospace 52

i4.0 today

MAY 19, 2023

The first ever recipients of the Made Smarter Awards, celebrating excellence in manufacturing, have been revealed. The scheme has been launched to mark the fourth anniversary of the pioneering Made Smarter adoption programme, a government-funded and industry-led initiative helping SME manufacturers digitalise, decarbonise and drive growth.

Manufacturing 52

Manufacturing 3D printing Robotics Robotics 52

i4.0 today

JANUARY 8, 2024

About AMADA WELD TECH AMADA WELD TECH is a leading manufacturer of equipment and systems for Laser Welding, Laser Marking, Laser Cutting, Resistance Welding, Hermetic Sealing and Hot Bar Reflow Soldering & Bonding. These versions include the IS-Q3000A, the IS-Q6000A, the IS-Q40A, and the IS-Q500A. We are an ISO9001 certified company.

Cycle time 52

Cycle time Electronics Process control Aerospace 52

i4.0 today

OCTOBER 13, 2023

And how are the individual components manufactured? The evolution of HUDs from aviation to automotive engineering The history of HUDs dates back to the 1940s, when they were first used in the weapon sights of fighter planes. The technology quickly spread to the automotive sector. How does this work exactly? Today Magazine.

Automotive 59

Automotive Electronics Form Sourcing 59

i4.0 today

AUGUST 23, 2022

Indium Corporation ® is proud to feature its innovative products for exciting and diverse industries such as EV manufacturing, mobile, 5G, and semiconductors at productronica India , September 21-23, in Greater Noida, India. . More than 2 million EVs are on the street with Indium Corporation’s Rel-ion products. indium.com.

Electronics 52

Electronics Automotive Manufacturing Industry 4.0 52