Fastener News Desk

JANUARY 5, 2025

The share of manufacturing sector GDP registering a composite PMI calculation at or below 45 percent (a good barometer of overall manufacturing weakness) was 49 percent in December, a 1-percentage point increase compared to the 48 percent reported in November. .” This is concerning as it’s our peak season.”

Manufacturing 59

Manufacturing Electronics Beverage Composites 59

Additive Manufacturing

JANUARY 11, 2023

Highlights included more options for printing bigger and smaller, printing electronics and composites, and a couple of open platforms to allow more material development for industry and researchers. announced its Electron Beam Additive Manufacturing (EBAM®) process deposited 40 lbs. Sciaky’s EBAM® Surpasses 40 lbs.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Composites 98

AU Manufacturing

FEBRUARY 13, 2023

Researchers at Sandia Labs, Ames National Laboratory, and Iowa State University say they have created a 3D-printable high-performance superalloy with an unusual composition that makes it stronger and lighter than state-of-the-art materials currently used in gas turbine machinery.

Additive manufacturing 96

Additive manufacturing 3D printing Manufacturing Aerospace 96

Canadian Manufacturing

JANUARY 15, 2025

announces that it has entered into a Joint Development Agreement with an established Japanese trading and manufacturing company specializing in automotive, chemicals, plastics, electronics and life science products. MISSISSAUGA — Cymat Technologies Ltd. ”

Automotive 52

Automotive Manufacturing Function Composites 52

i4.0 today

APRIL 2, 2025

Solutions and Dr. Thomas Kaufmann, Executive Vice President & COO of Infineons Automotive Division. The Summit will include a diverse lineup of speakers, including: Dr. Werner Lohwasser CEO & COO, TDK Electronics Samivel Krishnamoorthy Sr. The MESI 4.0 Registration for MESI 4.0 Summit 2025 is now open. Today Magazine.

Industry 4.0 52

Industry 4.0 Industry 4.0 Manufacturing Execution System (MES) Composites 52

Fabricating & Metal Work

JULY 26, 2022

The areas that PCD tooling excels in is the machining of non-ferrous materials, composites, electronic components, timbers and precious metals. Aluminum and composite products continue to grow quickly with the rapid expansion of consumer electronics, light-weight transportation and more efficient power generation.

Composites 52

Composites Electronics Cycle time Aerospace 52

Fabricating & Metal Work

NOVEMBER 12, 2024

Toby Maconachie, additive manufacturing engineer for PWR, with an automotive heat exchanger 3D printed on a Velo3D additive manufacturing system using the new CP1 aluminum alloy material. This simplifies setup time and frees the AM engineer to optimize for other desired properties such as surface roughness or performance.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Aerospace 52

i4.0 today

JANUARY 9, 2024

Its latest solution, Critical Manufacturing V10 MES, offers the most comprehensive and pioneering MES solution for electronics, semiconductor, medical device, and industrial equipment manufacturers. Critical Manufacturing’s success has come from a series of innovations in MES technology. Today Magazine.

Manufacturing Execution System (MES) 52

Manufacturing Execution System (MES) Composites Manufacturing Electronics 52

Robotics Business Review

SEPTEMBER 24, 2024

“By combining ultra-accurate path performance with GoFa’s inherent simplicity, safety, and flexibility, ABB’s new Ultra Accuracy feature opens a wide range of possibilities for the use of cobots in businesses including electronics, automotive, aerospace, and metal fabrication,” he added.

3D printing 59

3D printing Robotics Robotics Aerospace 59

i4.0 today

OCTOBER 5, 2023

The composites forum, which is supported by Composites UK, will cover topics such as new composite materials, light-weighting and made-for-purpose materials. The main stage, which is new for 2023, is a one-stop-shop for information on the latest industry developments, government policy and inspiring keynotes.

Composites 52

Composites Aerospace Electronics Automotive 52

Plastics News

NOVEMBER 22, 2022

This is especially relevant in complex supply chains such as those of chemicals, plastics, metals, and critical raw materials, but also automotive, electronics, packaging or construction. .

Supply Chain 69

Supply Chain Composites Automotive Compliance 69

Plastics News

AUGUST 4, 2023

DSG-Canusa also makes accessories for electrical/electronics, energy, communications and automotive markets. This new site will also house Kanata Electronic Services Ltd., The new plants are designed to expand production in Mattr's Connection Technologies segment (formerly the Automotive and Industrial segment).

Composites 52

Composites Electronics Automotive Aerospace 52

MEM

DECEMBER 7, 2022

CGTech will attend the Southern Manufacturing and Electronics exhibition from 7 th – 9 th February 2023 at the Farnborough International Exhibition Centre. On stand C215, the CGTech team will be demonstrating the latest release of their simulation software, VERICUT 9.3. cgtech.com.

Manufacturing 52

Manufacturing Electronics Consumer Goods Composites 52

i4.0 today

OCTOBER 18, 2022

Composite-based additive manufacturing appears to be on the verge of breaking through as a ‘mainstream’ method of production, according to a new report on disruptive 3D printing technologies. The long fibres within the composite act to reinforce the material, in a similar way to the prestressed steel tendons in reinforced concrete.

3D printing 52

3D printing Composites Additive manufacturing Cycle time 52

i4.0 today

SEPTEMBER 23, 2022

Composite-based additive manufacturing appears to be on the verge of breaking through as a ‘mainstream’ method of production, according to a new report on disruptive 3D printing technologies. The long fibres within the composite act to reinforce the material, in a similar way to the prestressed steel tendons in reinforced concrete.

3D printing 52

3D printing Composites Additive manufacturing Cycle time 52

Fabricating & Metal Work

DECEMBER 22, 2022

feature an ergonomically designed, lightweight composite housing which reduces tool vibration and is thermal-insulated to prevent cold air transmission to the operator. The Dynastraight Series works on a variety of materials including stainless steel, aluminum, carbon steel, copper, brass, plastic, fiberglass, composites, wood and more.

Robotics 98

Robotics Robotics Composites Automation 98

i4.0 today

AUGUST 16, 2023

Electronics manufacturing, including Alexander Hagenfeldt , Senior Manager Service EMEA at ASMPT. About ASMPT ASMPT (HKEX stock code: 0522) is a leading global supplier of hardware and software solutions for the manufacture of semiconductors and electronics. To learn more about ASMPT, please visit us at www.asmpt.com.

Industry 4.0 52

Industry 4.0 Industry 4.0 Manufacturing Execution System (MES) Composites 52

Mold Making Technology

NOVEMBER 20, 2024

Source | Walter USA LLC Walter USA LLC offers the MP060, MP160 and MP260 milling cutters with brazed PCD cutting edges for machining aluminum, aluminum-silicon alloys, magnesium alloys, plastics and fiber composite materials (ISO N and ISO O, or other material groups).

Composites 52

Composites Aerospace Electronics Automotive 52

i4.0 today

MAY 25, 2023

LTTS offers consulting, engineering, and implementation services to drive global digital transformation initiatives across sectors including semiconductor, electronics, medical devices, and discrete manufacturing. To learn more about ASMPT, please visit us at asmpt.com.

Smart manufacturing 52

Smart manufacturing Manufacturing Execution System (MES) Manufacturing Industry 4.0 52

MEM

SEPTEMBER 15, 2023

We have over 50,000 views of each issue of MEM on average in 2022 and go to print monthly and also publish in our newsletter, (each issue is available free for 12 months digitally).

Aerospace 52

Aerospace Electronics Composites Fit 52

MEM

MARCH 13, 2023

We have over 50,000 views of each issue of MEM on average in 2022 and go to print monthly and also publish in our newsletter, (each issue is available free for 12 months digitally).

Consumer Goods 52

Consumer Goods Value chain Electronics Composites 52

MEM

DECEMBER 8, 2022

We have over 50,000 views of each issue of MEM on average in 2022 and go to print monthly and also publish in our newsletter, (each issue is available free for 12 months digitally).

Consumer Goods 52

Consumer Goods Electronics Composites Aerospace 52

MEM

APRIL 26, 2023

We have over 50,000 views of each issue of MEM on average in 2022 and go to print monthly and also publish in our newsletter, (each issue is available free for 12 months digitally).

Consumer Goods 52

Consumer Goods Electronics Composites Aerospace 52

MEM

APRIL 25, 2023

We have over 50,000 views of each issue of MEM on average in 2022 and go to print monthly and also publish in our newsletter, (each issue is available free for 12 months digitally).

Consumer Goods 52

Consumer Goods Electronics Composites Aerospace 52

MEM

DECEMBER 8, 2022

Machinery trends such as the increasing use of onboard electronic controls and the growth of compact and electrified equipment demand efficient, low-power valves and hydraulic integrated circuit solutions.

Consumer Goods 52

Consumer Goods Electronics Composites Aerospace 52

i4.0 today

OCTOBER 21, 2024

Elsewhere, Ricardo will unveil its flexible battery module designed for low-volume performance automotive applications, while 2KM LTD is introducing its Paste Pro 3D PU Tooling Printing technology.

Composites 52

Composites Automotive Manufacturing Industry 4.0 52

Additive Manufacturing

FEBRUARY 5, 2023

Its enhanced flexibility will create unprecedented new product and market opportunities for our electronic device, biomedical, automotive, and display customers.”

3D printing 52

3D printing Electronics Composites Aerospace 52

i4.0 today

JULY 24, 2024

This year’s event, located behind the composites forum in the composite zone, is made possible through the exhibition’s continued partnership with ADS , the premier trade organisation for aerospace, defense, security and space sectors.

Aerospace 59

Aerospace Supply Chain Composites Form 59

MEM

APRIL 12, 2023

We have over 50,000 views of each issue of MEM on average in 2022 and go to print monthly and also publish in our newsletter, (each issue is available free for 12 months digitally).

Consumer Goods 52

Consumer Goods Electronics Composites Aerospace 52

Modern Machine Shop

NOVEMBER 24, 2022

In terms of total spending, the next largest markets will be industrial machinery ($900M), aerospace ($600M), and automotive ($500M). Electronics/computers/telecom. Trends in each category are tracked over time, and the composite index is built on an average of all the sub-indices.

Aerospace 102

Aerospace Supply Chain Composites Electronics 102

Modern Machine Shop

SEPTEMBER 10, 2024

short.pfonline.com/repliform3D EVs present exciting new opportunities for additional growth of the use of electroless nickel plating in the automotive market for several critical components. EN has been used in the automotive industry for decades. Source: Getty Images 3. One example is electroless nickel (EN) plating.

3D printing 52

3D printing Manufacturing Artificial Intelligence Automotive 52

SMMT

SEPTEMBER 26, 2022

Find out below who has joined the premier automotive trade association and what they get from membership: Anthony Best Dynamics Limited – www.abdynamics.com. Gateway Electronic Components Ltd – www.gatewaycando.com. National Composites Centre – www.nccuk.com. APC Technology Group PLC – www.apcplc.com.

Composites 40

Composites Automotive Electronics 40

Mold Making Technology

JULY 24, 2023

The Uptive brand provides production-grade parts across numerous end markets including medical, electronics, consumer, automotive, aerospace and defense, automation and industrial, among others. Brands under the Uptive umbrella include: Re3dtech – AM capabilities, including HP multi-jet fusion and Markforged composites.

Rapid prototyping 52

Rapid prototyping Prototype  Manufacturing 3D printing 52

Frost & Sullivan Manufacturing

SEPTEMBER 8, 2022

The pandemic triggered innovations in sanitary technologies and encouraged healthcare, automotive, building and construction sectors to adopt long-lasting antimicrobial technology. Leveraging digital technologies, such as digital twins and electronic health and medical records, to improve antimicrobial features. San Antonio– Sept.

Composites 52

Composites Electronics Form Automotive 52

Fastener News Desk

SEPTEMBER 5, 2023

The August composite index reading reflects companies managing outputs appropriately as order softness continues, but the month-over-month increase is a sign of improvement. ” [Computer & Electronic Products] “Demand still weak. The Imports Index remained in contraction territory, registering 48 percent, 1.6

Manufacturing 64

Manufacturing Beverage Composites Apparel 64

i4.0 today

NOVEMBER 30, 2022

Born2Bond instant adhesives are suitable for multiple substrates including metal, wood, leather, rubber, plastic composites and alloys. They also provide the required anti-corrosive and hydrophobic qualities suitable for underwater and minute-size applications. www.Born2Bond.Bostik.com.

Composites 52

Composites Fit Electronics Automotive 52

MEM

AUGUST 31, 2023

Automotive: Efficient cutting of automotive parts, panels, and prototypes. Manufacturing: High-volume production of metal and composite parts. Electronics: Precision cutting of electronic components and circuit boards. Architecture: Intricate shaping of stone and glass for architectural masterpieces.

Composites 52

Composites Aerospace Electronics Automotive 52