Canadian Metalworking Magazine

NOVEMBER 9, 2021

Leo recognizes IoCs mentioned in articles, and can gather them for you. Finding and collecting relevant indicators of compromise is critical to your security, but with millions of articles to sort through, discovering and collecting the right ones is a challenge. New Feature. Start Feedly for Cybersecurity trial. start 30 day trial.

Sourcing 96

Sourcing Supply Chain Automation 96

Dinesh Mishra

MAY 23, 2025

This article explores the role of hydrogen buses in transforming urban mobility and their potential to redefine public transport systems. This article explores the role of hydrogen buses in transforming urban mobility and their potential to redefine public transport systems. million in 2025 to US$ 2,625.1 What Are Hydrogen Buses?

Electronics 52

Electronics Sourcing Supply Chain 52

Robotics Business Review

FEBRUARY 2, 2025

Clarke and offers an inside look into how the company envisions the role of artificial intelligence in augmentingrather than replacinghuman expertise in the operating room. Proprio’s visualization technology uses volumetric intelligence to create a 3D view of anatomy and the surgical space without using radiation.

Robotics 86

Robotics Robotics Sourcing Artificial Intelligence 86

Robotics Business Review

AUGUST 10, 2024

These make them more attractive to manufacturing leaders looking to make smaller, more manageable investments in automation. They also offer a solution for highly automated, smart factories looking for the next value-add in niche applications such as screw assembly or buffing and grinding, they noted. Register now and save.

Robotics 110

Robotics Robotics Sourcing Automation 110

Modern Machine Shop

SEPTEMBER 1, 2024

At the same time, technology is advancing so automation systems can become more productive and take on more tasks of increasing complexity. The first article describes how 2D and 3D sensors enable Boston Dynamics’ Stretch robot to perform more complex tasks, such as unloading boxes from a trailer.

Automation 74

Automation Manufacturing Robotics Robotics 74

Fabricating & Metal Work

SEPTEMBER 30, 2024

The company isn’t looking to sell fabricators on every press brake tool that exists — WILA wants to prevent tooling just sitting unused at a shop. So, that was a huge savings for that customer in being able to do that and that’s the type of relationship we look at achieving,” Sloan added.

Warehousing 78

Warehousing Function Manufacturing Robotics 78

Canadian Metalworking Magazine

SEPTEMBER 6, 2022

LIH integrated Feedly’s AI engine into their tech stack to track macro trends and define trends inside the category of Travel and mobility tech. When Tino Klaehne first started working at the Lufthansa Innovation Hub (LIH) in 2017, things looked very different than they do today. The challenge: No process for strategic intelligence.

Sourcing 84

Sourcing Logistics Form 84

Fastener News Desk

AUGUST 3, 2022

I work for Rainer directly, so anytime we have an opportunity to have his type of leadership and experiences inside the United States, we welcome that! Fresh off a week-long U.S FND: Hello, gentlemen; thank you for the opportunity to speak with you both, you’ve clearly had a very busy past week. Please introduce yourselves to our audience.

3D printing 98

3D printing Supply Chain Logistics Additive manufacturing 98

Canadian Metalworking Magazine

AUGUST 31, 2020

Artificial intelligence and machine learning are powerful tools that allow Feedly AI to read thousands of articles published every day and prioritize a top selection based on the topics, organizations, and trends that matter to you. Feedly AI learns these topics by finding common themes in sets of articles curated by the Feedly team.

Artificial Intelligence 52

Artificial Intelligence 52

Control Engineering

FEBRUARY 20, 2023

Trained using troves of internet data, these machine-learning models take a small bit of input text and then predict the text that is likely to come next. The researchers’ theoretical results show that these massive neural network models are capable of containing smaller, simpler linear models buried inside them.

Artificial Intelligence 76

Artificial Intelligence Function 76

Modern Machine Shop

JUNE 11, 2023

The deburring is done inside of the machine , which cuts out the tumble-finishing process that caused most of the bottlenecks in the previous method. By pairing a Productive Robotics OB7 cobot with this Haas DS-30Y, Above All CNC can now machine 10 to 15 of these parts for bear-resistant containers overnight.

Bottleneck 98

Bottleneck Aerospace Cycle time Robotics 98

The Automation Blog

DECEMBER 6, 2022

In today's article I'm going to share what I've found have been the most important things new users must know about ControlLogix before they start using these programmable controllers for the first time. Shawn testing I/O in his ControlLogix course, PAC Basics, at TheAutomationSchool.com. and earlier. – [link].

Automation 52

Automation Electronics Form 52

Control Engineering

SEPTEMBER 12, 2023

Learning Objectives Learn about what Control Engineering subscribers need to do their jobs better, what articles they liked best and their about how to automate. For comparison, we also asked for topics aligned to provided product categories that subscribers buy and specify and asked for favorite articles (unprompted).

Automation 52

Automation Artificial Intelligence Compliance Robotics 52

Control Engineering

AUGUST 31, 2022

Related data analytics articles. Relate articles in this data analytics series are: – Webcast preview: What is just enough industrial data analysis? It’s all of the back-end systems and in the front-end systems inside an operational technology (OT) stack. This has been edited for clarity.

Manufacturing Execution System (MES) 52

Manufacturing Execution System (MES) Cycle time Fit Compliance 52

Dinesh Mishra

JANUARY 27, 2023

In this article, I will explore how an ordinary manufacturing company can approach industrial AI. I will look into major challenges, recommend simple AI use cases to get started, and demonstrate how one of our manufacturing clients has successfully kicked off a full-scale AI transformation. The answer is a definitive yes.

Artificial Intelligence 59

Artificial Intelligence Manufacturing Supply Chain Assembly Line 59

Modern Machine Shop

DECEMBER 1, 2022

A version of this article was our cover story in the December 2022 issue of Modern Machine Shop. If you are arriving here from that issue, scroll down to find links to articles and video related to each of the 10 points in this piece. This photo and the drawing below courtesy of DMG MORI. In all, 46 sealing points were involved.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Form 98

Fabricating & Metal Work

FEBRUARY 17, 2024

This article explores these industry challenges in detail and shares tips to ease the inspection process. In general, inspections take place at every part of the manufacturing process, so the number of inspections is high — from hundreds to thousands per day. mm diameter flexible scope with an ultra-thin 1.8

Automotive 52

Automotive Fit Manufacturing 52

Control Engineering

SEPTEMBER 14, 2022

Taking the next step in industrial data analytics requires identifying and moving past various obstacles. Related data analytics articles. Relate articles in this data analytics series are: – Webcast preview: What is just enough industrial data analysis? Learn strategies to more easily implement industrial data analytics.

Warehousing 52

Warehousing Bottleneck Sourcing Industry 4.0 52

Factory Worx

JANUARY 20, 2023

In this article, we'll look at how Industry 4.0 According to the optimistic visions of Mining 4.0 , intelligent technologies, automation, and remote control will take over dangerous and regular work, allowing operators to focus on learning, developing, and enjoying work tasks in a safe environment. Read Our Blog Industry 4.0:

Industry 4.0 52

Industry 4.0 Industry 4.0 Artificial Intelligence Value chain 52

E&T

NOVEMBER 10, 2022

The GPU-maker is far from alone: it has become something of an article of faith that information and computing technologies (ICT) will deliver overall savings in energy consumption through better planning. Huang has good reason to be optimistic about the future of AI-driven computing.

Artificial Intelligence 94

Artificial Intelligence Form Automation Robotics 94

Infinite Uptime

MAY 10, 2022

This article discusses Predictive Maintenance, a new age approach for plant maintenance, and why an IoT-led Predictive Maintenance approach can solve most of your maintenance worries for your cement plants. There are three facts about cement plants that are universally true: . But that is putting it very mildly.

Function 52

Function Automation Industry 4.0 Industry 4.0 52

ATS

NOVEMBER 4, 2024

This article explains why industrial organizations conduct fault tree analysis. An OR gate indicates that the top event will happen if any input event occurs, while an AND gate requires that each input event must take place to cause the failure (top event or primary issue) to occur. What is fault tree analysis (FTA)?

Logistics 52

Logistics Function Sourcing Manufacturing 52

Robotics Business Review

FEBRUARY 3, 2024

The da Vinci SP surgical robotics system. Source: Intuitive Surgical The surgical robotics space saw a major shakeup last year. Robotics is hard. Robotics in healthcare is hard.” It pretty much sums up the situation for medtech companies large and small that sought to compete against Intuitive Surgical in the soft-tissue surgical robotics space.

Robotics 128

Robotics Robotics Sourcing Fit 128

Control Engineering

SEPTEMBER 21, 2022

Related data analytics articles. Relate articles in this data analytics series are: – Webcast preview: What is just enough industrial data analysis? It’s very factual, and everybody can look at the same sets of data across multiple facilities. Learn how data analytics can help fill the skills gap.

Process control 52

Process control Enterprise Resource Planning (ERP) Function Beverage 52

Mold Making Technology

NOVEMBER 2, 2023

Photo Credit: Lawrence Mold and Tool Looking back at more than 45 years of ordering injection molds, I’d estimate I used 40 or 50 different mold builders. Proper mold design takes collaboration. The more people that review a new mold design, the better. At the very least, use a mold design checklist. I don’t.

Lead Time 59

Lead Time Cargo Fit Automation 59

Dinesh Mishra

SEPTEMBER 20, 2022

Some recent articles published in the media: Monitoring Solutions for Smart Forming; Modern Manufacturing India (MMI). and DMI Influencer 2022 shares his company’s media and industry influence and the vision for the growth of the industry. Social Media presence. LinkedIn: 20,045 followers. YouTube: 1.05K subscribers. at IMTEX 2022.

Form 52

Form Automotive Fit Assembly Line 52

Mold Making Technology

MARCH 21, 2024

I shared my experience and takeaways in an article, which we are republishing in MMT as per reader feedback. They especially like that the classroom interaction takes place inside of the maintenance bench area. We were excited and honored that Steve reached out to us, and it was an easy decision from there.

Fit 52

Fit Function Sourcing 52

Dinesh Mishra

FEBRUARY 25, 2024

It only takes the AI-based app seconds to reveal how an application can be technically optimised with lubrication-free components from igus. To do this, designers don’t have to pore over catalogues, make phone calls or write e-mails, but simply take a photo of their application. igus proves this at the Hannover Messe with igusGO.

Industry 4.0 52

Industry 4.0 Industry 4.0 Artificial Intelligence Robotics 52

Dinesh Mishra

OCTOBER 1, 2023

The company takes pride in sharing the success stories of three of its customers. Quaker Houghton takes care of the complete fluid management at their plant in Jamshedpur. R&T Team, for looking into customer needs of specific application-driven support. These could be categorized as the epitome of customer delight.

Electronics 52

Electronics Supply Chain Manufacturing Aerospace 52

Fastener News Desk

OCTOBER 26, 2022

One of my main areas of focus has been in transformation and we’re looking forward to sharing a little bit with you now about where Optimas is going in the future. October 17th, 2022. By; Cris A. Young, Editor-at-Large. FND : Hello, Cris Young here from Fastener News Desk at the International Fastener Expo in Las Vegas, Nevada.

Supply Chain 52

Supply Chain Bill of Materials Sourcing Manufacturing 52

Dinesh Mishra

SEPTEMBER 20, 2022

Industry thought leader, writer, and diversity sponsor Bhavana Bindra, Managing Director, REHAU South Asia the organization major milestones and her leadership vision for the company and the industry. DMI Editor Aanand Pandey got the opportunity to ask Ms. Bindra about the company’s aims, major projects, top strengths, and her leadership vision. .

Function 52

Function Composites Manufacturing 52

Dinesh Mishra

JANUARY 2, 2023

The global EV market never looked this good. India’s Makers and Movers were recognized and honoured in the first in-person ceremony since inception. Industry Leaders discussed the industry’s opportunities, trends, and challenges during the week-long fiesta. When: Saturday, 10th December 2022. All About the EV Trend.

Aerospace 52

Aerospace Point of use Manufacturing Electronics 52

CMTC Manufacturing Tech

JUNE 6, 2025

The longer an article is in the process of manufacture and the more it is moved about, the greater is its ultimate cost. ” Instead, we recommend looking at your product families. But identifying and solving problems is only part of the journey. The next step is redesigning your processes so those problems don’t return.

Lead Time 55

Lead Time Assembly Line Bottleneck Function 55

Modern Machine Shop

JULY 14, 2024

In 2023, as a senior adviser to Tornos, he visited the Swiss machining pioneer’s headquarters in Moutier, Switzerland, and at the time of his death was putting the finishing touches on this article about the technology. An early workshop showing a line of belt-driven machine tools and workers for the watchmaking industry.

Electronics 111

Electronics Cycle time Manufacturing Form 111

E&T

JUNE 14, 2023

She first became concerned for her safety when, during a visit to the UK, 16-year-old El-Attar wrote an article on life in Egypt for LGBTQ+ people and published it on a friend’s website. “I My friend was sent to prison for two years for publishing that article – and he wasn’t even a member of the ‘community’!”

Electronics 116

Electronics Sourcing Supply Chain Compliance 116

Mold Making Technology

NOVEMBER 8, 2022

A leader pin bushing typically has an inside diameter of 0.0005 inch above nominal with a tolerance of +0.0005/-0.0000. Regardless, it is well worth taking some time to become familiar with the various types of fits, if for no other reason than to use the correct terminology when speaking with others. The major categories of ANSI B4.1-1967-R1987

Fit 103

Fit Function Lead Time Robotics 103

Mold Making Technology

JANUARY 10, 2023

Who is NextGen Mold Technologies? Dennis Goggin, president, NextGen Mold Technologies : We are a new and innovative mold provider servicing the automotive industry with new tooling from concept to completion, engineering changes, repairs and landing support. What are your target markets? Values the work-life balance of all team members.

Automotive 98

Automotive Form Manufacturing Sourcing 98