Control Engineering

AUGUST 27, 2022

Additive Manufacturing Insights. Texas A&M University has developed a new class of biomaterial inks that mimic native characteristics of highly conductive human tissue, which is needed for the ink used in 3D printing, or additive manufacturing.

3D printing 52

3D printing Electronics Sourcing Additive manufacturing 52

Additive Manufacturing

AUGUST 15, 2022

For many years in 3D printing circles, the idea that a digital process would allow customization or personalization at a mass scale, would largely nullify Jobs’ philosophy. Mass customization and personalization are quite different, however, from a manufacturing perspective. SOURCE: Formlabs.

3D printing 98

3D printing Additive manufacturing Prototype  Fit 98

Mold Making Technology

MARCH 3, 2024

Source (clockwise) | DMS, Lyndex-Nikken, SprutCAM and Hasco. Source | DMS 3D-Printed Hot Runner Nozzles Yield Consistent Temperature Profile Selective laser melting (SLM) metal 3D printing, combined with artificial intelligence (AI), produce DMS Monolith hot runner nozzles, tailored precisely to part and process specifications.

3D printing 52

3D printing Sourcing Artificial Intelligence Robotics 52

E&T

SEPTEMBER 22, 2023

As Wales Tech Week draws closer, visitors can expect digital transformation in manufacturing to be one of the main focuses. I spoke to experts in the industry to see how manufacturing businesses stand to reap huge benefits from tech advances including digital transformation. But digital transformation cannot be considered in isolation.

Manufacturing 69

Manufacturing Supply Chain 3D printing Smart manufacturing 69

Manufacturer's Monthly

DECEMBER 11, 2023

With 3D printing beginning to finally have the impact on manufacturing that was expected some 30 years ago, manufacturers remain wary of truly capitalising on it. Fatigue failures happen for two main reasons in additive manufactured parts according to Jurg. Additive Assurance is looking to change that.

3D printing 91

3D printing Additive manufacturing Manufacturing Aerospace 91

Manufacturer's Monthly

JULY 17, 2023

Designers have 3D-knitted bespoke hospital scrubs and 3D printed chill out pods for busy healthcare workers to improve their comfort and workplace mental health. Cotsaftis said hospital scrubs were an unconscious source of stress for many healthcare workers. Most importantly, the furniture was sound absorbing.

3D printing 91

3D printing Prototype  Sourcing Fit 91

Fabricating & Metal Work

MARCH 25, 2024

“Using advanced pulsed-GMAW equipment, EWI can work with end users to develop custom waveforms for the arc DED and the alloys associated with additive manufacturing,” says Michael Carney, Senior Engineer at EWI. It is faster than other methods of additive manufacturing, extremely accurate, and can fabricate large-scale parts.

Additive manufacturing 40

Additive manufacturing Manufacturing Sourcing Rapid prototyping 40

ATS

MAY 12, 2023

Technology continues to evolve, electric vehicle demand continues to grow and shift the market share balance, and manufacturers remain on the hunt for efficiencies and process improvements. Augmented reality is helping car manufacturers to do so in these areas and more.

Manufacturing 52

Manufacturing 3D printing Automotive Prototype  52

Canadian Manufacturing

NOVEMBER 2, 2023

The lab features: an electro-mechanical lab for actuator performance, motor, environmental and system testing; a wet lab for valve performance testing and valve/actuator wet accelerated life testing; and a fast prototype lab with 3D printing for assembly fit testing and creating prototypes on demand. Source: Business Wire

3D printing 40

3D printing Prototype  Compliance Fit 40

Mold Making Technology

NOVEMBER 28, 2023

The Pressure Tester is portable and requires no power source, as the tests are performed manually. Shrink-Fit Machine Features Integrated Cooling Photo Credit: Haimer USA Haimer USA displays its Power Clamp Air i4.0 Eco, a high performance shrink-fit machine with integrated cooling for all cutting tools (solid carbide and HSS).

3D printing 52

3D printing Cycle time Fit Sourcing 52

Mold Making Technology

MARCH 14, 2024

B A Die Mold Founder and Owner Al Petrucci takes pride in the team’s in­novation, personalized service and collective experience in mold manufacturing. Source, all images: B A Die Mold Inc. Uses 3D solid models and databases to offer mold and new product design and re-engineering of existing products.

3D printing 113

3D printing Consumer Goods Manufacturing Pharmaceutical 113

Control Engineering

JULY 17, 2023

Learning Objectives Understand how Ireland fosters collaboration and innovation among manufacturers. See how workforce development and training initiatives can support innovation in manufacturing. Learn about innovative manufacturing projects underway in Ireland. Industry 5.0 insights Whereas Industry 4.0 Industry 5.0

Industry 4.0 52

Industry 4.0 Industry 4.0 Pharmaceutical 3D printing 52

Fastener News Desk

MARCH 29, 2024

Written by: Matt Kremenetsky AJ Strandquist is a different kind of additive manufacturing (AM) CEO. But if manufacturers design with it in mind, they can come up with this hybrid system that takes advantage of all forms of manufacturing. AM shouldn’t necessarily be the number one production method. And there’s no way around it.

3D printing 59

3D printing Bill of Materials Made-to-spec Supply Chain 59

Additive Manufacturing

NOVEMBER 14, 2022

Calty Design Research and 3D printing company Carbon join forces. “There’s an athleticism in the performance of the RX that makes it a perfect fit to join the ‘Wakanda Forever’ team.” PLANO, Texas, Nov. Beyond the customized exterior wrap, the students at adidas S.E.E.D

3D printing 52

3D printing Automotive Sourcing Fit 52

Robotics Business Review

MAY 1, 2024

Recently, Tormach introduced its new 1500MX CNC mill that can be operated with the ZA6 industrial robot via the company’s free and open source PathPilot ® control software. What is lights-out manufacturing and who are the Tormach customers who would use it? How can it take your customers’ operations to the next level?

Prototype  85

Prototype  Robotics Robotics Rapid prototyping 85

Additive Manufacturing

DECEMBER 21, 2022

THE CHALLENGE: Additive manufacturing has progressed from being mainly a tool for low-cost prototyping to a manufacturing activity that can produce large volumes of high-value metallic components. Industry experts have identified quality control as one of the biggest obstacles to widespread additive manufacturing adoption.

3D printing 52

3D printing Additive manufacturing Composites Prototype  52

Control Engineering

AUGUST 17, 2023

The overall result shows that the development of 5G-based enterprise AR applications were in an early stage of development in 2021, but there are promising use cases that showed the potential of 5G in driving adoption of enterprise AR applications in various sectors, particularly in manufacturing. The survey was run during May 2021.

Industry 4.0 52

Industry 4.0 Industry 4.0 Smart manufacturing Electronics 52

Manufacturer's Monthly

MARCH 18, 2024

Image: Amiga Engineering Amiga Engineering has long been a beacon in the Australian manufacturing landscape for diversifying and meeting the needs of wider industry and remaining relevant. Amiga Engineering is an Australian based manufacturing company known for its innovation and advancements in the industry.

3D printing 87

3D printing Additive manufacturing Manufacturing Advanced manufacturing 87

Mold Making Technology

FEBRUARY 8, 2023

Over the past 56 years, we have grown into a world-class manufacturing business with 130 employees and an 87,000-square-foot manufacturing facility (61,000-square-foot air-conditioned manufacturing area, 14,000-square-foot area for the office, engineering and training; and a 12,000-square-foot climate-controlled warehouse.

Prototype  52

Prototype  Robotics Robotics Automation 52

i4.0 today

MARCH 1, 2024

As manufacturing technology advances, new trends are emerging that are pushing the boundaries of what is possible – from 3D printing to intelligent production networks. But it is not only newly manufactured machines that can contribute to progress in the industry. © Surplex). To learn more, visit www.surplex.com.

3D printing 52

3D printing Aerospace Automotive Function 52

MEM

MAY 9, 2023

Supercharging Additive Manufacturing with Software By Doug Kenik, director of software manufacturing, Markforged As the additive manufacturing industry matures, the pace of software innovation has sped up to a sprint. And these, in turn, give manufacturers the ability to scale using digital inventory.

Additive manufacturing 98

Additive manufacturing Manufacturing Fit Form 98

Modern Machine Shop

APRIL 10, 2023

Brent Donaldson, Editor-in-Chief of Modern Machine Shop: Welcome to Made in the USA, the podcast for Modern Machine Shop all about major themes shaping American manufacturing today, I'm Brent Donaldson. Its manufacturing operations and suppliers have been and still are global. Develop that for the company.

Made-to-spec 98

Made-to-spec Supply Chain Logistics Manufacturing 98

Fabricating & Metal Work

MARCH 25, 2024

IMTS – The International Manufacturing Technology Show has announced the opening of registration for more than 10 conferences at IMTS 2024, an enhanced conference format, and new IMTS Elevate programs for IMTS 2024. The conference celebrates women’s impact in manufacturing. The conference schedule runs from Monday, Sept.

Supply Chain 52

Supply Chain 3D printing Industry 4.0 Industry 4.0 52

Additive Manufacturing

AUGUST 27, 2022

According to its President, Bob Swenson, TriTech is a spin-off of his former company, AmeriTi Manufacturing, which was sold to Kymera International also on April 5, 2022. TriTech’s unique array of three production technologies includes 3D binder jet printing, metal injection molding and investment casting. DETROIT, Aug.

Rapid prototyping 52

Rapid prototyping 3D printing Prototype  Fit 52

Fastener News Desk

JULY 17, 2023

On the other hand, companies such as Würth Elektronik eiSos, manufacturers of fittings and the Trade unit are affected by the global economic slowdown. SOURCE: Würth Group RELATED CONTENT: Würth Additive Group CEO Joins 3D Printing in Auto Repair Task Force 5 Ways to Elevate Your IFE 2023 Experience!

3D printing 52

3D printing Supply Chain Fit Electronics 52

Automation Mag

JANUARY 8, 2024

Besides precision, accuracy and faster speed, motion control customers in the manufacturing industry are looking for new solutions that offer greater safety, ease of integration, flexibility and reduction of waste. Morris also lists medical/lab processes, CNC machining, 3D printing and cobot applications as growth areas for motion control.

Robotics 64

Robotics Robotics Function Automotive 64

Modern Machine Shop

JANUARY 23, 2023

Brent Donaldson, Editor-in-Chief of Modern Machine Shop: Welcome to Made in the USA, the podcast for Modern Machine Shop magazine that explores some of the biggest ideas shaping American manufacturing. It's become apparent to many people outside of manufacturing, why the US needs a robust manufacturing base.

Sourcing 98

Sourcing Supply Chain Manufacturing 3D printing 98

Modern Machine Shop

FEBRUARY 7, 2023

Brent Donaldson, Editor-in-Chief of Modern Machine Shop: Welcome to Made in the USA, the podcast from modern machine shop magazine that explores some of the biggest ideas shaping American manufacturing. Its owners used to be in the food service sector, they ran sandwich restaurants, but they left this work to launch a manufacturing business.

Sourcing 52

Sourcing Manufacturing Supply Chain 3D printing 52

Modern Machine Shop

MARCH 6, 2023

Tim Cucchi, Product Manager : It doesn't get any better than that after 142 years, we're still maintaining that American manufacturing, that work ethic, that craftsmanship. It is one of the most basic tools for precision manufacturing. But I never before thought of it as a thing that would also be precision manufactured.

Manufacturing 97

Manufacturing Supply Chain Automation Fit 97

Modern Machine Shop

MARCH 28, 2023

Brent Donaldson, Editor-in-Chief of Modern Machine Shop: Welcome to Made in the USA, the podcast for Modern Machine Shop magazine that explores some of the biggest ideas shaping American manufacturing. That they've reached their practical limit when it comes to sourcing parts in the US versus outsourcing to a lower cost country.

Supply Chain 52

Supply Chain Fit Manufacturing Sourcing 52

E&T

JANUARY 26, 2023

It could mean that 5G may be a consumer trend, wherein 5G product categories could be a diverse mix of smartphone, cameras, data cards, fitness brands and smart watches. Augmented reality, virtual reality and 3D printing, along with 5G, will enhance application integration. Initially, companies used to whet data.

3D printing 59

3D printing Artificial Intelligence Fit Electronics 59

Control Engineering

MAY 1, 2023

Learning Objectives Understand how digitalization and automation contribute to record US manufacturing growth. Hear how Manufacturing in America 2023 Summit speakers advocate for automation to advance sustainability, productivity and growth in manufacturing, industrial applications, and automated farming. Courtesy: Mark T.

Automation 52

Automation Manufacturing Supply Chain 3D printing 52