MEM

AUGUST 14, 2023

Consort Precision Diamond Company (CPD), headquartered in North Wales, has not only established itself as a prominent player in the manufacturing sector but has also achieved remarkable success and recognition for its unwavering commitment to excellence and innovation. Collaborations have been a cornerstone of CPD’s success.

Manufacturing 98

Manufacturing Benchmarking Aerospace Supply Chain 98

Canadian Manufacturing

AUGUST 22, 2023

North America’s manufacturer of hydraulic presses and automation systems, equipment used by manufacturers to shape and mould materials such as metal, plastic, rubber and wood. Through our Regional Development Program, our government is proud to help Ontario manufacturers expand and create more good-paying jobs.

Manufacturing 40

Manufacturing Aerospace Automation Automotive 40

MEM

MAY 18, 2023

A specialist manufacturing and supply chain advisory group has secured a £5.5m It will also allow directors Bill Boswell and Ben Cufley to complete the management buy-in they began in 2018.Sirius, Refinancing Deal appeared first on Manufacturing & Engineering.

Supply Chain 52

Supply Chain Manufacturing Aerospace Automotive 52

Canadian Manufacturing

APRIL 10, 2024

LAVAL — M1 Composites Technology Inc, a Quebec-based aerostructure engineering, manufacturing, and sustainment/repair company has been selected by Satair, an Airbus Services company, as the preferred North American repair station for Airbus A220 aircraft flight controls and structural parts.

Composites 40

Composites Assembly Line Aerospace Manufacturing 40

Canadian Manufacturing

JUNE 21, 2023

Since its establishment in Quebec on July 1st, 2018, Airbus says they have contributed more than 4,000 employees outside Europe, generating approximately 23,000 indirect jobs in Canada. “The integration of the A220 programme in 2018 marked a major milestone for Airbus.

Aerospace 40

Aerospace Assembly Line Supply Chain Sourcing 40

Additive Manufacturing

APRIL 27, 2023

Bethesda, MD – The Applied Science & Technology Research Organization of America ( ASTRO America ) and the Guam Economic Development Authority (GEDA) released a Baseline Additive Manufacturing (AM) Readiness Report today highlighting that Guam has the basic building blocks for establishing a high-tech manufacturing sector on the island.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Supply Chain 52

Modern Machine Shop

FEBRUARY 28, 2023

In this same vein, automation, as a piece of equipment that increases efficiency of a manufacturing process or improves the quality of the final product, may include inspection equipment — also called metrology — which offers a compelling return on investment. Utilizing the U.S. measurement.

Form 98

Form Automation Aerospace Robotics 98

AU Manufacturing

AUGUST 30, 2022

a leading metal additive manufacturing technology company for mission-critical parts, today announced Hermeus , a company developing hypersonic aircraft for defense and commercial applications, has acquired an original Sapphire and a large-format Sapphire XC that is designed for high-volume production. Media Release by Velo3D. About Velo3D.

3D printing 74

3D printing Additive manufacturing Supply Chain Aerospace 74

Additive Manufacturing

OCTOBER 18, 2022

These facilities have enabled more than 2,000 engine tests, multiple successful mission duty cycles, and a fully-integrated stage testing of a 3D printed orbital flight article – which is not only a first for Relativity but for the entire aerospace manufacturing industry. Senator Cindy Hyde-Smith (R-Miss.).

3D printing 52

3D printing Aerospace Additive manufacturing Manufacturing 52

Manufacturer's Monthly

JULY 11, 2023

robotics and collaborative robots are changing the way the welding and manufacturing industries work. Increasingly, advanced technology is becoming a critical factor in the success of globally competitive welders, fabricators and manufacturers. The power of Industry 4.0, robots and cobots Automation, Industry 4.0, Industry 4.0

3D printing 73

3D printing Industry 4.0 Industry 4.0 Robotics 73

i4.0 today

FEBRUARY 22, 2023

However the specific uses depend on the type of vehicle or model being manufactured. These robotic vision systems are beginning to gain favor with manufacturing companies all over the world, particularly in settings where precise execution of repetitive tasks like inspection is required. CAGR between 2018 and 2022.

Robotics 52

Robotics Robotics Automotive Warehousing 52

Fabricating & Metal Work

DECEMBER 30, 2022

The company was purchased in 2018 by Tooling Tech Group (TTG) and is part of the company’s Automation Division. Industries served include automotive, appliance, lawn and garden, agricultural, aerospace, marine, and off-road vehicle industries, among others. Subscribe to learn the latest in manufacturing. toolingtechgroup.com.

Automation 52

Automation Composites Aerospace Automotive 52

E&T

AUGUST 23, 2022

Shenzhen-based company DJI is the top manufacturer of commercial drones, with an estimated market share of around 70 per cent, according to Drone Industry Insights. and reach the goal of becoming a global civil aviation power," a representative from the aviation authority said. per cent) and China's Yuneec (3.6 tonnes (1,360kg).

Aerospace 75

Aerospace Electronics Robotics Robotics 75

AU Manufacturing

OCTOBER 10, 2022

Led by former F1 engineer Ian Foley, Equipmake has forged its reputation by developing advanced EV technology for automotive OEMs and specialist supercar manufacturers, offering a complete suite of solutions from electric motors to power electronic systems to complete EV drivetrains for buses.

Aerospace 90

Aerospace Electronics Automotive Manufacturing 90

Additive Manufacturing

SEPTEMBER 19, 2022

ICYMI: Additive manufacturing news reflected the return of IMTS with big announcements before and during the show. Nikon expanded their additive manufacturing reach with bid to takeover SLM Solutions and investment in Hybrid Manufacturing Technologies. HP announced availability of the Metal Jet S100.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Form 52

i4.0 today

NOVEMBER 16, 2023

The UK’s largest annual gathering of engineering and manufacturing professionals, Advanced Engineering, opened its doors once again on November 1 and 2, 2023 at the NEC, Birmingham. We manufacture a lot of our products externally, so we plan on using the prize money to take us further on the R&D and production road.”

Composites 52

Composites Aerospace Supply Chain Manufacturing 52

Trimantec

JANUARY 22, 2020

As a manufacturer, have you ever pondered the benefits and risks of outsourcing? As with any cost-saving endeavor, outsource manufacturing has its pros and cons. In the past, many companies were hesitant to outsource any of their manufacturing to an outside source. Outsource Manufacturing and Its Subsets. Why Outsource?

Manufacturing 52

Manufacturing 3D printing Assembly Line Made-to-spec 52

i4.0 today

JANUARY 30, 2023

The DIY robot arms comes with customizable features and can be cost effective due to its low manufacturing costs. CAGR between 2018 and 2022 The industrial robot dominated the market with US$ 15,755.5 Key Takeaways from Market Study The global industrial robot market is projected to grow 12.1% and reach US$ 56,171.4

Robotics 52

Robotics Robotics 3D printing Warehousing 52

Canadian Manufacturing

AUGUST 1, 2023

a manufacturer of advanced plasma processes and sustainable solutions which are geared to reduce greenhouse gases (GHG), announces the receipt of a contract valued at approximately $4.13 Department of Energy, heating is the process responsible for the largest energy demand and greenhouse gas emissions in the manufacturing sector.

Aerospace 40

Aerospace Manufacturing Advanced manufacturing 40

Canadian Manufacturing

MARCH 25, 2024

Boeing CEO David Calhoun will step down from the embattled plane maker at the end of the year as part of a broad management shakeup after a series of mishaps at one of America’s iconic manufacturers. Stan Deal, president and CEO of Boeing’s commercial airplanes unit, will retire immediately. Fallout from the Jan. In a note on Mar.

Manufacturing 52

Manufacturing Aerospace Compliance 52

Fastener News Desk

AUGUST 3, 2022

(NYSE: MSM ), a premier distributor of Metalworking and Maintenance, Repair and Operations supplies to industrial customers throughout North America, today announced that it has acquired Tower Fasteners, a Holtsville, New York -based valued-added distributor of Original Equipment Manufacturer (OEM) fasteners and components.

Electronics 52

Electronics Supply Chain Aerospace Sourcing 52

Canadian Manufacturing

MARCH 13, 2024

12 that it would work with employees found to have violated company manufacturing procedures to make sure they understand instructions for their jobs. Responding to a U.S. government audit, Boeing said on Mar.

Compliance 52

Compliance Manufacturing Aerospace 52

Fastener News Desk

APRIL 7, 2023

National Fastener Distributors Association The National Fastener Distributors Association (NFDA) is pleased to announce that Carmen Vertullo of Carver Engineering and Manufacturing (San Diego, CA) is the 2023 recipient of its Fastener Professional of the Year award.

Compliance 52

Compliance Aerospace Sourcing Manufacturing 52

Canadian Manufacturing

SEPTEMBER 1, 2022

Le Bouthillier says Canadian officials have nonetheless reached out to manufacturer Boeing, as well as counterparts in the U.S. Defence Department spokesman Daniel Le Bouthillier says there have not been any reported engine fires on the Royal Canadian Air Force’s 15 Chinooks and that the helicopters continue to be flown.

Manufacturing 52

Manufacturing Aerospace Compliance 52

Robotics Business Review

DECEMBER 26, 2023

OTTO Motors, a division of Clearpath, develops AMRs for manufacturing and logistics applications. Agile Robots was founded at the German Aerospace Center (DLR) in 2018. This deal is a major endorsement of AMRs. Ontario, Canada-based Clearpath develops AMRs for research and development purposes.

Robotics 113

Robotics Robotics Logistics Automation 113

Canadian Manufacturing

JULY 20, 2022

.” The announcement alongside Florida-based Piper Aircraft at the Farnborough Airshow in the United Kingdom comes amid record heat in England, and as discussions around greenhouse gas emissions and carbon neutrality monopolized attention among major industry players at the event that was last held in 2018.

Aerospace 40

Aerospace Manufacturing 40

MEM

JUNE 27, 2023

They also powered the world’s fastest compressed natural gas car to a land speed record of 370 mph at the Bonneville Salt Flat in September 2018. No matter the complexity of the project, Cosworth has the ability to design, develop and manufacture clean sheet solutions from its state-of-the-art facilities.

Automotive 52

Automotive Aerospace Electronics Manufacturing 52

Canadian Manufacturing

JANUARY 27, 2023

The judge delayed ruling on a request by the families to appoint a special monitor to examine safety issues at the aerospace giant. Investigations into the 2018 and 2019 crashes pointed to a flight-control system that Boeing added to the Max without telling pilots or airlines. Boeing and the Justice Department opposed the request.

Aerospace 40

Aerospace Compliance Manufacturing 40

AU Manufacturing

NOVEMBER 28, 2022

With a background in Environmental Science and Data Management, Ms Wells joined Lockheed Martin Australia in 2018 as a Configuration Analyst, before going on to complete a Bachelor of Business with Southern Cross University in 2019. www.lockheedmartin.com/en-au. About Southern Cross University.

Aerospace 52

Aerospace Manufacturing 52

Modern Machine Shop

APRIL 14, 2024

In 2018, Thompson convinced his father to purchase a four-axis CNC machine to begin exploring the wider world of CNC work. Thompson says these machines have not only simplified some of the shop’s old work but enabled it to work on aerospace and defense projects. spaceflight firms. spaceflight firms.

Cycle time 52

Cycle time Aerospace Form Function 52

Dinesh Mishra

JANUARY 30, 2023

Both did a detailed tour of the Ankleshwar plant where Mr. Sekhar explained to Dinesh the complete manufacturing process and administration of different departments that together run the production unit. In Dec 2020, Dormer Pramet acquired Miranda Tools, an India-based manufacturer of high-quality, high-speed cutting tools.

Automotive 52

Automotive Lean manufacturing Automation Aerospace 52

Manufacturer's Monthly

NOVEMBER 28, 2022

Space Tank Studio is a business makerspace and manufacturing incubator helping local designers and innovators build new to-market products with global potential. New ideas and start-ups inject excitement into Australia’s manufacturing ecosystem. New ideas and start-ups inject excitement into Australia’s manufacturing ecosystem.

3D printing 93

3D printing Prototype  Advanced manufacturing Manufacturing 93

Canadian Manufacturing

JANUARY 20, 2023

A 2018 report by the Canadian Council for Aviation and Aerospace said that a third of flight operators in the country at that time cited pilots as their biggest skills shortage.

Aerospace 40

Aerospace Manufacturing 40

Canadian Manufacturing

JANUARY 19, 2023

But a 2018 report by the Canadian Council for Aviation and Aerospace said that a third of flight operators in this country at that time cited pilots as their biggest skills shortage. And because discount carriers don’t pay as well as Air Canada or WestJet, lower-cost airlines also struggle with retention.

Aerospace 40

Aerospace Beverage Manufacturing 40

Canadian Manufacturing

NOVEMBER 29, 2023

It was also a drop in the bucket compared to the goal of producing 1 billion gallons a year set in 2018 by the Federal Aviation Administration. Government Accountability Office said that while domestic production of the fuel had jumped from about 2 million gallons in 2016 to 15.8 million gallons in 2022, it accounted for less than 0.1%

Sourcing 40

Sourcing Aerospace Manufacturing 40

Canadian Manufacturing

MARCH 6, 2023

A 2018 report by the Canadian Council for Aviation and Aerospace estimated the industry needed to hire 55,000 new workers by 2025 to keep up with projected growth and replace retirees. He said financial incentives and other supports are needed to keep pilots in the North, where there are also benefits to working.

Aerospace 40

Aerospace Manufacturing 40

Robotics Business Review

JANUARY 18, 2024

Founded in 2018, KEF said it provides algorithms that use camera data to enable autonomous flight across a variety of platforms and use cases. “We’re seeing an interesting economic trend in purchasing aircraft — manufacturers are focusing on producing aircraft, and autonomy software is complex,” Pogoda noted.

Robotics 115

Robotics Robotics Sourcing Form 115