Manufacturer's Monthly

APRIL 5, 2023

Additive manufacturing company Conflux Technology is partnering with Rocket Factory Augsburg (RFA) to develop aerospace heat exchangers as part of the Australian Space Agency’s Moon to Mars Initiative. $1 1 million AUD in grant funding is being used to develop and manufacture this 3D-printed heat exchanger.

Aerospace 98

Aerospace 3D printing Supply Chain Additive manufacturing 98

AU Manufacturing

FEBRUARY 27, 2023

The New South Wales Government announced that the “best and brightest” defence and aerospace companies will showcase their capabilities to key global decision-makers at the 2023 Australian International Airshow & Aerospace and Defence Exposition (AVALON 2023). The NSW stand is located at AVALON 2023’s Hall 2 Booth 2M8.

Aerospace 98

Aerospace Advanced manufacturing Artificial Intelligence Supply Chain 98

Manufacturer's Monthly

MAY 14, 2023

Queensland’s manufacturing minister Glenn Butcher visited leading innovators at the Australian Manufacturing Week 2023 (AMW2023) showcase, held last week in Melbourne. Minister Butcher visited the Elexon Electronics stand, lauding the company as an example of a QLD manufacturing success story.

Manufacturing 98

Manufacturing Industry 4.0 Industry 4.0 Aerospace 98

Metrology

OCTOBER 11, 2022

GKN Aerospace has acquired a pioneering Swedish additive manufacturing system business, as part of its Engines business’s journey to transform its supply chain and offer more sustainable and advanced material.

Additive manufacturing 59

Additive manufacturing Aerospace Manufacturing Supply Chain 59

AU Manufacturing

JULY 24, 2022

Wire Additive Manufacturing (WAM) developer AML3D has begun processing its compliance with the AS9100D:2016 quality systems accreditation for its proprietary manufacturing technology. .

Aerospace 105

Aerospace Additive manufacturing Manufacturing Compliance 105

Design World

NOVEMBER 17, 2022

Hexagon’s Manufacturing Intelligence division and Stratasys, a leader in polymer 3D printing solutions, have applied Hexagon’s simulation technology to capture the behavior of Stratasys’ high-performance, ultra-lightweight Antero reinforced polyetherketoneketone (PEKK) materials and its additive manufacturing processes.

3D printing 147

3D printing Aerospace Additive manufacturing Manufacturing 147

The Fabricator

MAY 3, 2023

Spirol, a global manufacturer of engineered fasteners, installation machines, and parts feeding equipment, has announced that Ford Aerospace Ltd., South Shields, U.K., will be joining the Spirol group of companies.

Aerospace 64

Aerospace Manufacturing 64

Modern Machine Shop

APRIL 4, 2023

Photo Credit: Enjet Aero Enjet Aero , a manufacturer of jet engine precision-machined and fabricated components and assemblies with nine facilities and a wide array of capabilities, relied on employees to record data from shop floor processes in spreadsheets, a time-consuming and labor-intensive task. .

Aerospace 98

Aerospace Manufacturing Cycle time Automation 98

AU Manufacturing

APRIL 5, 2023

Australian 3D-printed heat exchanger manufacturer Conflux Technology is partnering with Rocket Factory Augsburg to develop aerospace heat exchangers as part of the Australian Space Agency’s Moon to Mars Initiative. This effort is also critical to the agency’s mission of transforming and growing the Australian space sector.

3D printing 98

3D printing Aerospace Supply Chain Additive manufacturing 98

Manufacturing Management

APRIL 13, 2023

Stockport based ASG Group has announced their ongoing commitment to quality and accreditation approvals, showcasing their growing capability in the aerospace industry. The group has received a group wide AS9100 approval following recent audit by NQA.

Aerospace 52

Aerospace Manufacturing 52

AU Manufacturing

MAY 22, 2023

million Advanced Manufacturing Centre of Excellence at Melbourne Polytechnic’s Heidelberg campus. million Advanced Manufacturing Centre of Excellence (AMCOE) will train future workers and upskill existing ones to promote innovation and North Melbourne’s increasingly technology-driven, value-added manufacturing industry.

Advanced manufacturing 95

Advanced manufacturing Manufacturing 3D printing Aerospace 95

E&T

MARCH 23, 2023

Download free whitepaper 3D printing has been on the rise amongst aerospace manufacturers. Download our new eBook to learn how the aerospace industry uses AM, what the industry needs from 3D printing solutions, how today’s AM technologies address these needs, innovative applications and case studies, and more.

3D printing 59

3D printing Aerospace Composites Additive manufacturing 59

The Fabricator

NOVEMBER 1, 2022

Pinnacle Aerospace has announced plans to build a $15 million facility in Wellington, Kan., for manufacturing and assembling complex metal components for commercial and military aircraft and the space industry.

Aerospace 64

Aerospace Manufacturing 64

The Fabricator

DECEMBER 8, 2022

GKN Aerospace has announced that it will relocate its North America additive manufacturing (AM) facility to the Lone Star Commerce Center in Fort Worth, Texas.

Additive manufacturing 64

Additive manufacturing Aerospace Manufacturing 64

AU Manufacturing

MAY 14, 2023

The Hunter Manufacturing Awards Board is inviting interested participants to join the official launch of the 2023 event to be held on 24 May at Mayfield North, New South Wales. Truck topper supplier MITS Alloy will host the program, along with the winner of the 2022 Manufacturer of the Year (less than 50 employees) – Sirron Holdings Group.

Manufacturing 98

Manufacturing Aerospace Logistics 98

Additive Manufacturing

NOVEMBER 11, 2022

There are many wow inducing , human race compelling , case studies in healthcare , construction, space , automotive, and aerospace. All 3D printing systems used in the aerospace field need to be based on a strong quality management system. This standard is based on ISO 9001 , with specific requirements for aerospace.

3D printing 98

3D printing Aerospace Quality Management System Manufacturing 98

Additive Manufacturing

NOVEMBER 18, 2022

The deal solidifies the growth plan of the Group’s Surface Solution Division to further penetrate the aerospace market, in terms of both military and commercial applications. As a result, the company will find itself uniquely placed to boost the integration of the use of Additive Manufacturing for this market.

Additive manufacturing 83

Additive manufacturing Aerospace Manufacturing 3D printing 83

The Fabricator

MAY 3, 2023

Spirol, a global manufacturer of engineered fasteners, installation machines, and parts feeding equipment, has announced that Ford Aerospace Ltd., South Shields, U.K., will be joining the Spirol group of companies.

Aerospace 52

Aerospace Manufacturing 52

Metrology

JULY 26, 2022

Renishaw, has installed a RenAM 500Q Flex Additive manufacturing (AM) system at aerospace manufacturer GKN Aerospace’s state-of-the-art Global Technology Centre in Bristol, UK. Taking its place alongside the latest technologies.

Additive manufacturing 59

Additive manufacturing Aerospace Manufacturing 59

AU Manufacturing

JANUARY 26, 2023

Weber State University is using 3D printing to advance its research on composite materials that support northern Utah’s aerospace and defence ecosystem. The university’s Miller Advanced Research and Solutions (MARS) center recently upgraded and installed the Impossible Objects Composite-Based Additive Manufacturing system, or CBAM-2.

3D printing 98

3D printing Aerospace Composites Additive manufacturing 98

MEM

OCTOBER 6, 2022

This World Space Week , the University of Nottingham Aerospace Unlocking Potential (UP) programme has announced it has pledged more than £110,000 in funding to three UK businesses working to improve sustainability in the aerospace sector. Manufacturing & Engineering Magazine | The Home of Manufacturing Industry News.

Aerospace 105

Aerospace Supply Chain Manufacturing Prototype  105

Fastener News Desk

MARCH 5, 2023

SPIROL is pleased to announce that Ford Aerospace Ltd based in South Shields, UK will be joining the SPIROL group of companies. Ford Aerospace was founded at Tyne Dock in 1910 by Robert Ford, and the family business has most recently been led by the founder’s great-grandson, Chris Ford.

Aerospace 52

Aerospace Manufacturing Fit Sourcing 52

Fabricating & Metal Work

FEBRUARY 17, 2023

For those shops producing aerospace or medical components, CERATIZIT will bring some of its most innovative tooling and machining solutions to EASTEC specifically developed for optimizing the production of parts for those industries. Known for its strength-to-weight ratio, 7075 aluminum is prevalent in the aerospace industry.

Aerospace 98

Aerospace Manufacturing Automotive Cycle time 98

Metrology

MAY 11, 2023

Angus Taylor has worked in product design and manufacturing across several industries relevant to GelSight, including the aerospace, automotive, and medical sectors.

Manufacturing 104

Manufacturing Aerospace Automotive 104

AU Manufacturing

FEBRUARY 28, 2023

Boeing is hiring Australian companies to provide components for the manufacturing of AH-64E Apaches. Australia-based companies Cablex and Thomas Global Systems will manufacture cabling, and design and manufacture cockpit avionics components for the global fleet of Apaches, respectively.

Manufacturing 98

Manufacturing Aerospace Supply Chain Composites 98

Metrology

AUGUST 1, 2022

Insphere has won funding from NATEP – National Aerospace Technology Exploitation Programme to develop its IONA technology to accelerate the adoption of robotics for challenging aerospace manufacturing tasks. Insphere will lead.

Aerospace 59

Aerospace Robotics Robotics Manufacturing 59

AU Manufacturing

MARCH 26, 2023

The market for additive manufacturing (AM) and materials could reach USD 183 billion (AUD 275 billion) by 2032, a 21.2 In terms of absolute value, the market for additive manufacturing and materials in the US is projected to generate USD 47.7 billion (AUD 71.8 billion) by 2032. billion (AUD 71.8 billion) by 2032.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Industry 4.0 98

Canadian Manufacturing

MARCH 14, 2023

NWI Precision Tube ULC and Women in Aerospace – Canada (WIA – Canada). These projects will increase manufacturing capacity and productivity, green operations, provide professional skills development and support over 180 jobs across southern Ontario’s aerospace sector. BURLINGTON — On Mar.

Aerospace 52

Aerospace Composites Manufacturing 52

Plataine

DECEMBER 11, 2022

implementations are focused on helping manufacturers meet the growing demand, increase productivity, and overcome supply chain challenges, all while dealing with workforce shortages. trends we forecast to be in the spotlight for the Aerospace composites industry in 2023: The post Industry 4.0 Today, Industry 4.0

Industry 4.0 52

Industry 4.0 Industry 4.0 Aerospace Composites 52

Additive Manufacturing

MAY 25, 2023

The new facility expands from its existing 16,000-square-foot facility, giving substantially more capacity for growth and expanded capabilities to serve the exponential demand for advanced additive manufacturing in our served markets. It will also support prototyping, advanced manufacturing technologies, and process development.

Advanced manufacturing 52

Advanced manufacturing Manufacturing Additive manufacturing Aerospace 52

Fabricating & Metal Work

SEPTEMBER 23, 2022

Honeycutt Manufacturing , a Mukilteo, Washington (Seattle) job shop in service to the aerospace, marine and general industrial markets, made a major investment recently in a GROB G550T 5-axis universal machining center. Typical aerospace and other parts produced by Honeycutt Manufacturing.

Aerospace 96

Aerospace Manufacturing Made-to-spec Supply Chain 96

AU Manufacturing

NOVEMBER 2, 2022

The Aerostructures Innovation Research Hub (AIR Hub) at Swinburne University of Technology is partnering with the National Institute for Aerospace Research (NIAR) at Wichita State University. The partnership will focus on digitisation of aerospace composites, advanced manufacturing technologies and specialised simulation capabilities.

Aerospace 59

Aerospace Advanced manufacturing Composites Manufacturing 59

E&T

MARCH 24, 2023

Green manufacturing is being adopted across industries on a global scale. In the aerospace and defence industry too, the accent is on green or decarbonisation. Digital twins and additive manufacturing may help reconfigure product design. What could it mean in terms of aerospace and defence technologies?

Aerospace 59

Aerospace Manufacturing Advanced manufacturing Bottleneck 59

AU Manufacturing

MARCH 5, 2023

Advanced technology manufacturer SPEE3D has partnered with New South Wales-based Nupress to evaluate and supply applications to the Amphibious Aircraft project with a production service that grants local manufacturers access to the WarpSPEE3D metal 3D printer.

Aerospace 52

Aerospace 3D printing Manufacturing Supply Chain 52

Gary Mintchell

JANUARY 27, 2023

a pioneer of green manufacturing technologies with the first modular digital factory for the automotive industry. Divergent has developed an alternative production process to traditional vehicle manufacturing called DAPS (Divergent Adaptive Production System) that addresses economic and environmental challenges head-on.

Manufacturing 130

Manufacturing 3D printing Discrete manufacturing Automotive 130

Manufacturing Management

JULY 20, 2022

Evolito, a manufacturer of electric motors and controllers for aerospace applications, has today announced the acquisition of the business and assets of Cheltenham-based aerospace battery solutions company Electroflight.

Aerospace 52

Aerospace Manufacturing 52

AU Manufacturing

NOVEMBER 3, 2022

Northrop Grumman has signed a six-year contract with Quickstep Holdings for the delivery of Australian-made components for the F-35 aerospace program. . Northrop manufactures the centre fuselage section for all three F-35 variants. . Work will be performed in Quickstep’s headquarters in Sydney, New South Wales. .

Manufacturing 105

Manufacturing Aerospace Supply Chain Composites 105