Control Engineering

MAY 30, 2023

After a few years of contraction, down from the peak level of 15,397 units in 2017 to 9,854 units in 2021, installations surged to 14,594 units in 2022. Cyclical demand from automotive In the United States, demand from car makers and manufacturers of components rose by 48% in 2022.

Robotics 52

Robotics Robotics Automotive Electronics 52

E&T

OCTOBER 7, 2022

The article was commissioned by the consumer campaign group SumOfUs. . Dr Susie Alegre has written a legal opinion piece warning that the UK government's proposed nternet safety laws fail to address the root causes of online harm, while also damaging free speech. . The Online Safety Bill is a mess and needs a total rewrite.

Fit 81

Fit Form 81

Robotics Business Review

MARCH 22, 2024

Butterfly Network won FDA clearance in 2017 for the Butterfly iQ for iPhone. Editor’s note: This article was syndicated from The Robot Report sibling site Medical Design & Outsourcing.

Robotics 94

Robotics Robotics Artificial Intelligence Form 94

Cisco Smart Manufacturing

JANUARY 24, 2018

My colleague Scot Wlodarczak laid out seven key areas to success in RFID Journal with his article “ Don’t Let Your Industrial Internet of Things Project Fail” and noted the following: Start small: If you focus on your entire plant, you will make success much less likely. You can view the entire article here.

Overall Equipment Effectiveness (OEE) 52

Overall Equipment Effectiveness (OEE) Industry 4.0 Industry 4.0 Sourcing 52

Robotics Business Review

APRIL 17, 2024

In the meantime, the company itself changed owners, from Google in 2013 to SoftBank in 2017 and most recently to Hyundai in 2020. The new version of Atlas demonstrated that point in how it stood up in the video at the top of this article. To continue pure research, Hyundai founded the Boston Dynamics AI Institute in 2022.

Robotics 123

Robotics Robotics Artificial Intelligence Automotive 123

Manufacturer's Monthly

SEPTEMBER 13, 2023

With the name change completed, the final stages of the combination of Sullair and Hitachi Industrial Equipment Systems is completed, this article will uncover what this means for the compressed air market in Australia. In a significant stride towards innovation and industry leadership, Hitachi Industrial Equipment Systems Co.

Pharmaceutical 72

Pharmaceutical Beverage Manufacturing 72

AU Manufacturing

OCTOBER 24, 2022

Article by Joe Craparotta, VP IT Business & Strategic Segments, Schneider Electric. The Internet of Vehicles (IoV) — connected cars, effectively — market is poised to grow more than 200% between 2017 and 2024. Software guides everything from production to testing to in-car navigation.

Automotive 59

Automotive Manufacturing Function Sourcing 59

Control Engineering

APRIL 24, 2023

Past partner nations from Europe include Portugal in 2022, Sweden in 2019 and Poland in 2017. It is believed it will be from a European nation and the United Kingdom has turned down the offer to be the partner nation. – Edited from a Hannover Messe press release by CFE Media and Technology.

Sourcing 52

Sourcing Advanced manufacturing Manufacturing Discrete manufacturing 52

Control Engineering

OCTOBER 8, 2023

journey in 2017 after selecting TrakSYS as their manufacturing execution system (MES) platform to provide actionable insights into asset performance and optimization. Can you please give a brief description of the project? Farmer Brothers embarked on their Industry 4.0

Manufacturing Execution System (MES) 98

Manufacturing Execution System (MES) Enterprise Resource Planning (ERP) Industry 4.0 Industry 4.0 98

Control Engineering

AUGUST 17, 2023

The article examines how the enterprise AR ecosystem perceives the coming of 5G, which enterprise AR solutions can be developed using 5G deployments, what are the difficulties in achieving, and what are the benefits. The analysis is based on a collection of enterprise 5G deployments, covering the period 2017-2021.

Industry 4.0 52

Industry 4.0 Industry 4.0 Smart manufacturing Electronics 52

Control Engineering

JANUARY 11, 2023

The growing need to follow industry safety standards and government protocols are key factors anticipated to catalyze the growing demand for safety-instrumented systems during the forecast period from 2017 to 2025.

Pharmaceutical 52

Pharmaceutical Function Automotive Automation 52

Mold Making Technology

OCTOBER 1, 2023

Back in 2017, Westminster Tool implemented a more proactive plastic-quality design process. Since making these changes, our on-time delivery and successful initial first article inspections (FAIs) have drastically increased. With that in mind, why aren’t molders and moldmakers discussing plastic quality sooner?

Lead Time 98

Lead Time Fit Form Function 98

Manufacturer's Monthly

APRIL 19, 2023

We were grouped together as a team in university around 2017, and we all wanted to influence the growing space industry in Australia,” Uscinski said. The team of three are mechanical and aerospace engineers who met at the University of Queensland and started the company in 2020 while they were still students. “We

3D printing 93

3D printing Aerospace Supply Chain Prototype  93

Control Engineering

SEPTEMBER 9, 2022

In 2017, the organization released the IEEE Standard for Local and Metropolitan Area Networks –Timing and Synchronization for Time-Sensitive Applications. What is TSN technology? Ethernet, managed by the IEEE under the IEEE 802.3 group of standards, continues improving.

Industry 4.0 98

Industry 4.0 Industry 4.0 Automation Function 98

Control Engineering

MAY 1, 2023

Launched in 2017, mHUB has supported over 500+ startups and 200 manufacturers from all over the world that have created 5,000+ jobs and generated over $2.6 billion of economic activity.

Manufacturing 52

Manufacturing Prototype  52

Control Engineering

SEPTEMBER 14, 2022

According to a 2017 study by the SANS Institute, the NIST Cybersecurity Framework (identify, protect, detect, respond, recover) is becoming a leading framework in industrial environments. Which framework to pick comes down to your objective and what your regulatory requirements are. Different frameworks are better for different things.

Supply Chain 52

Supply Chain Digital manufacturing Manufacturing Compliance 52

Control Engineering

NOVEMBER 22, 2022

We have held CSIA certified status since 2017 and are currently working towards ISO 9001 certification. We have been extremely focused in the last 5 years on continuous improvements, with investments in new software and training programs for technical teams.

Supply Chain 52

Supply Chain Process control Pharmaceutical Automation 52

E&T

OCTOBER 1, 2022

Four years prior, an article published in Yahoo News reported that a CIA covert communications system had been compromised by Iran and China around 2011, leading to the death of “more than two dozen sources” in China and Iran.

Sourcing 85

Sourcing 85

Foley

APRIL 11, 2023

The core of these investigations remains the same— i.e. , the ITC evaluates the injury to a domestic industry by an alleged statutory violation or other unfair act, but the semiconductor chip as a component of the imported automotive article is a newer target and implicates new issues. The exclusion order is issued to U.S. 337-TA-928.

Automation 75

Automation Automotive Electronics Supply Chain 75

Canadian Metalworking Magazine

SEPTEMBER 6, 2022

When Tino Klaehne first started working at the Lufthansa Innovation Hub (LIH) in 2017, things looked very different than they do today. When Tino and his team identify a new “fuzzy concept” or broader trend that they want to research and define, they set up a new Feedly Board on the topic and add relevant articles from other boards.

Sourcing 84

Sourcing Logistics Form 84

MEM

APRIL 28, 2023

In this article, he explains the latest innovation in turning from Sandvik Coromant. In 2017, Sandvik Coromant developed PrimeTurning ™, a turning concept that enables ‘all-directional turning’ for greater machining flexibility. Like any inventor, Sandvik Coromant began with a challenge to solve.

Cycle time 52

Cycle time Manufacturing 52

E&T

NOVEMBER 10, 2022

The GPU-maker is far from alone: it has become something of an article of faith that information and computing technologies (ICT) will deliver overall savings in energy consumption through better planning.

Artificial Intelligence 94

Artificial Intelligence Form Automation Robotics 94

Fastener News Desk

MAY 11, 2023

McKinsey & Company – Listen to the article: What is supply chain? For instance, the 2011 earthquake and tsunami in Japan shut down electronics factories, and 2017’s Hurricane Harvey disrupted US oil refineries and petrochemical plants, ultimately leading to shortages of some plastics and resins critical to different industries.

Supply Chain 52

Supply Chain Value chain Industry 4.0 Industry 4.0 52

Mold Making Technology

DECEMBER 21, 2023

Despite all that I have said in this article, the best safety strap is one that also functions as a lifting bar. I discussed these types of bars in my May 2017 column , “Locating Rings, Platen Damage and the Center of Gravity.” To disengage the strap: remove one screw, slide it over and reinstall the screw.

Function 52

Function Fit 52

Fabricating & Metal Work

JULY 23, 2023

This article is dedicated to: Hall A– 3D/Additive Manufacturing, Forming & Fabricating AMADA to Debut Robotic Bending Systems, Display Variety of Machinery Booth A1304 AMADA AMERICA will introduce at FABTECH the EGB 6013 ARe bending robot. Based on the demand, I assembled a team to develop the product, which we launched in 2017.

Additive manufacturing 98

Additive manufacturing Form Manufacturing Automation 98

Control Engineering

AUGUST 2, 2023

Courtesy: Foreword LLC, NPI, Beckhoff Automation The engineers began evaluating vendors of scalable commercial off-the-shelf (COTS) solutions in 2017 ahead of the GenIII Xstream redesign. Figure 3: A combination of GigE cameras and scanners to measure size ensure parcels end up in the correct bin.

Automation 98

Automation Pharmaceutical Bottleneck Industry 4.0 98

Control Engineering

AUGUST 28, 2022

Globally adopted and internationally recognized by ISA 103, GB-T 29618-2017 and IEC 62453 organizations, tens of millions of DTM-enabled devices world-wide are serviced by FDT hosting environments, and all major control system and device vendors support FDT technology.

Smart manufacturing 52

Smart manufacturing Discrete manufacturing Automation Function 52

Control Engineering

AUGUST 31, 2023

Courtesy: Chris Vavra, CFE Media and Technology CESMII, created in 2017 by the Federal government, is about accelerating the democratization of smart manufacturing, reducing costs and the complexity around smart manufacturing. There’s an urgent need to improve manufacturing, Dyck said.

Smart manufacturing 52

Smart manufacturing Manufacturing Industry 4.0 Industry 4.0 52

Nexus Integra

SEPTEMBER 22, 2022

In this article we tell you how new technologies allow to achieve a sustainable and efficient environment. Some examples of Smart City projects are: In London , a sustainable development plan has been working since 2017 on the construction, waste management and energy of the city. Smart City, the answer to build sustainable cities.

Artificial Intelligence 52

Artificial Intelligence Automation 52

E&T

AUGUST 9, 2022

For most people reading this article, fast, reliable internet access is a given. This is up from 15 per cent the previous year, when the gender gap had been falling year on year from 25 per cent in 2017. When we have a question, it is second nature to pick up our phone and search on Google, or even ask your smart home device of choice.

Sourcing 85

Sourcing Fit Electronics Form 85