Modern Machine Shop

FEBRUARY 28, 2023

As with other forms of automation, one early adopter of industrial metrology was the automotive sector. Since 2014, however, its total spending had been steadily declining. Unsurprisingly, the aerospace sector steadily increased orders for metrology over that same time, peaking in 2018 but maintaining an elevated pace since.

Form 98

Form Automation Aerospace Robotics 98

AU Manufacturing

JUNE 5, 2023

Founded in 2014, Titomic Limited is an Australian public company specialising in large integrated solutions for industrial-scale metal additive manufacturing, using its patented cold spray additive manufacturing (Cold Spray AM) technology.

Additive manufacturing 52

Additive manufacturing Aerospace Automotive Manufacturing 52

Fabricating & Metal Work

DECEMBER 29, 2022

a pioneer of green manufacturing technologies with the first modular digital factory for the automotive industry. The patented process combines AI-optimized generative design software, additive manufacturing (3D printing) and automated assembly to build lightweight automotive parts and frames. www.divergent3d.com. www.hexagon.com.

3D printing 52

3D printing Discrete manufacturing Automotive Smart manufacturing 52

Canadian Manufacturing

AUGUST 5, 2022

From 2014 through 2019 Mr. Aiken served as a management consultant for the Automotive sector, across North America focusing on strategy, marketing and distribution growth in preparation for M&A activities. In 2009, Mr. Aiken was awarded a Master of Business Administration (MBA) degree from Queens University.

Automotive 52

Automotive Manufacturing 52

Mold Making Technology

FEBRUARY 15, 2023

The shop produces plastic components through injection molding and plastic welding (vibration and hot plate) for prototype runs up to a couple hundred thousand parts per year for the medical, automotive and consumer products industries. Isaac manages all programs for BTE’s tooling division. technologies.

Industry 4.0 93

Industry 4.0 Industry 4.0 Prototype  Automotive 93

E&T

DECEMBER 9, 2022

Before that I completed a Bachelors in mechanical engineering with automotive at Leeds. At my all-girls school, I was encouraged to study English and Economics A Levels because I enjoyed reading, but halfway through, I decided to change career direction and follow my passion for automotive racing.

Fit 97

Fit Automotive Composites Form 97

Additive Manufacturing

DECEMBER 17, 2022

The patented process combines AI-optimised generative design software, additive manufacturing (3D printing) and automated assembly to build lightweight automotive parts and frames. DAPS is a fully integrated software and hardware solution, creating a complete modular digital factory for complex structures.

3D printing 52

3D printing Manufacturing Discrete manufacturing Automotive 52

E&T

JANUARY 20, 2023

Growing demand for freight transport raised CO 2 emissions from heavy duty vehicles each year from 2014 until the Covid-19 pandemic brought a temporary reduction in 2020, the EU environment agency said.

Freight 111

Freight Manufacturing Logistics Automotive 111

i4.0 today

FEBRUARY 2, 2023

Cyber Essentials was launched in 2014 as part of the Government’s wider National Cyber Security Strategy. As a business operating in manufacturing, Cressall supplies several industrial sectors including automotive, marine and energy generation ,” explained Malcolm Garbett, business systems senior project manager.

Manufacturing 52

Manufacturing Compliance Automotive Industry 4.0 52

i4.0 today

MARCH 21, 2024

Industrial applications: In the automotive and mechanical engineering industries, tubes are essential for conducting liquids and gases and as structural components. Among other things, a DMG CNC Lathe, a DMG Vertical Machining Centre, a PS CNC Milling Machine and BOEHRINGER Cycle Lathes are up for auction until 26/03/2014.

Form 52

Form Electronics Automotive Function 52

Manufacturer's Monthly

JUNE 19, 2023

The manufacturing sector was the first to recognise the potential of robotics, with industrial robots appearing on the factory floor of automotive manufacturer, General Motors, as early as 1961. This has caused Australia to drop from a ranking of 18th to 35th (of 37) in the world in robot density in the manufacturing industry.

Robotics 105

Robotics Robotics Manufacturing Artificial Intelligence 105

Manufacturer's Monthly

AUGUST 28, 2023

The manufacturing sector was the first to recognise the potential of robotics, with industrial robots appearing on the factory floor of automotive manufacturer, General Motors, as early as 1961. This has caused Australia to drop from a ranking of 18th to 35th out of 37 in the world in robot density in the manufacturing industry.

Robotics 98

Robotics Robotics Manufacturing Artificial Intelligence 98

Fastener News Desk

JANUARY 14, 2024

Since 2014, the Best Booth Awards have served as a testament to the creativity, branding, and design prowess of the exhibitors. Watch now on FastenerTV at YouTube: The prestigious Best Booth Awards have been presented to the awardees by Fastener News Desk. Congratulations to all the 2023 Best Booth Award winners!

Aerospace 98

Aerospace Automotive Form Manufacturing 98

Dinesh Mishra

JULY 28, 2023

Theis Precision caters to the need of various market segments such as automotive, textile machinery, cutting blades/saws, office machinery, general engineering, etc. Theis Precision Steel has products across sectors such as agriculture, automotive, construction, cutting tools, earthmoving and textile machinery among others.

Automotive 52

Automotive Manufacturing Form 52

Frost & Sullivan Manufacturing

JUNE 7, 2022

Turns out Volkswagen’s infamous “Dieselgate” was not deterrent enough, and Fiat Chrysler Automobiles (FCA) has become the latest automotive company to be indicted for attempting to cheat its way past emissions testing regulations. Negotiations between FCA and the government to resolve the current probe have dragged on since 2017.

Compliance 52

Compliance Form Automotive 52

Manufacturer's Monthly

AUGUST 9, 2023

The Markforged story began in 2013 with years of research and development, culminating in a milestone achievement in 2014 when the company unveiled the world’s first 3D printer capable of printing in continuous carbon fibre. This advancement opened new possibilities for manufacturing stronger and more resilient parts.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Supply Chain 98

Mold Making Technology

AUGUST 22, 2023

Triangle Tool Ultra Tool Group United Tool & Mold Wentworth Mold Westminster Tool ( 2014 and 2021 ) X-Cell Tool and Mold 2024: YOU? They include representatives from mid- to large-size OEMs and molding companies in the automotive, medical, packaging, consumer goods, appliances and electronics industries.

Manufacturing 98

Manufacturing Lead Time Form Consumer Goods 98

E&T

MAY 15, 2023

But the event that was instigated to display to the public automotive engineering and manufacturing excellence, was ultimately deemed a success due to 30 (of 37) cars finishing – a total that would not be equalled for another 70 years. Rotary engines were followed by hybrids in the 1990s.

Automotive 59

Automotive Fit Prototype  Manufacturing 59

Mold Making Technology

DECEMBER 28, 2023

Recognized twice as the Leadtime Leader by MMT in 2014 and 2021, the company has seen three of its employees featured in MMT’s esteemed 30 Under 30 list for 2021. Notably, they've handled automotive, construction, medical devices, and heavy vehicle manufacturing. In this case study, we check in with Westminster Tool Inc. ,

Cycle time 52

Cycle time Supply Chain Manufacturing Automotive 52

Manufacturer's Monthly

JANUARY 4, 2023

Before President Joe Biden’s recent support of additive manufacturing, the Obama administration created a lot of awareness and demand for 3D printers in 2014. The Markforged FX20 printer is primarily designed for high-strength end-use parts in the aerospace, defence, automotive and energy industries.

Manufacturing 105

Manufacturing Composites Additive manufacturing Aerospace 105

Manufacturer's Monthly

NOVEMBER 21, 2023

In that spirit, we launched the Rapid Automated Materials and Processing (RAMP) Centre in Melbourne in 2014, to demonstrate how these tools could accelerate advanced materials and chemical science research and development (R&D). CSIRO was an early believer in the transformative power of robotics and automation in research laboratories.

Robotics 52

Robotics Robotics Automation Aerospace 52

Dinesh Mishra

SEPTEMBER 19, 2022

We provide CAD/CAM solutions to support manufacturing applications in moldmaking, automotive, aerospace, and consumer industries, among others. We have remained at the forefront of CAD/CAM technology by listening to our customers’ needs, being accessible, and most of all, being dedicated to our customers.

Advanced manufacturing 52

Advanced manufacturing Manufacturing 3D printing Aerospace 52

Mold Making Technology

AUGUST 16, 2023

Rudy passed away in 2014 and the Mozer family retained Delta Mold. Delta Mold manufactures multiple automotive components. .: Delta Mold was established in 1978 by Rudy Mozer, the founder of Delta Technologies. Delta Technologies, founded in 1952, was our parent company until 2016, when it was sold to US Farathane LLC.

Cycle time 52

Cycle time Prototype  Manufacturing Automation 52

Control Engineering

MARCH 16, 2023

Launched in 2014 by Prime Minister Modi, the Make in India initiative provides a range of incentives to encourage manufacturing growth, with a target of increasing the manufacturing industry’s contribution to GDP to 25% by 2025. India has clearly identified technology manufacturing as a sector with potential for future growth.

Apparel 52

Apparel Manufacturing Supply Chain Electronics 52

Dinesh Mishra

JANUARY 3, 2024

For over 30 years, the Turkish company SELSA has been supplying international clients in the automotive industry with high-quality components. When his father suddenly died in 2014, he had to take responsibility overnight. I see our prospects for further business development in the automotive sector very positively,” says Dizdar.

Automotive 98

Automotive Manufacturing 98

Fastener News Desk

APRIL 18, 2023

The partnership has been in place since 2014 and includes branding on the team’s race cars, driver uniforms, and team equipment. .” Photo credit: Würth Würth Industry has invested in a variety of sports sponsorships, including: NASCAR : Würth is a primary sponsor for the Richard Childress Racing team in NASCAR’s Cup Series.

Supply Chain 69

Supply Chain Fit Warehousing Manufacturing 69

Foley

APRIL 11, 2023

Automakers and their suppliers have long been participants in unfair trade investigations before the International Trade Commission (“ITC”), but the scope and subject matter of automotive-related investigations is evolving. This is particularly evident in recent ITC investigations involving semiconductor chips. 337-TA-928.

Automation 75

Automation Automotive Electronics Supply Chain 75

Mold Making Technology

FEBRUARY 29, 2024

Phase 1: 2014-2015 Shown here is the first automation unit Cavalier installed with a Hermle C42 U five-axis CNC and five Hermle PW850 pallets, plus a two-axis pallet changer/shuttle. Cavalier Tool & Manufacturing Ltd.

Automation 52

Automation Robotics Robotics Manufacturing 52

Canadian Manufacturing

JANUARY 9, 2023

counterpart Barack Obama the last time the summit took place in Mexico in 2014, Doer recalled. isn’t playing fair when it comes to how it defines foreign content in its automotive supply chains. from 2009 to 2016. Then-prime minister Stephen Harper got plenty of one-on-one face time with U.S. protectionism.

Automotive 40

Automotive Supply Chain Manufacturing Compliance 40

i4.0 today

DECEMBER 9, 2022

Climate change, government policy, and consumers are rapidly driving the automotive industry towards an electrified future. He joined Indium Corporation in 2014 and has more than 20 years of experience in the electronics industry. local time at IPC APEX Expo in San Diego, Calif.,

Six Sigma 52

Six Sigma Electronics Supply Chain Automotive 52

SMMT

NOVEMBER 1, 2022

PZPM: current Polish automotive landscape and opportunities. The Polish Automotive Industry Association (PZPM) shares their outlook on current challenges and opportunities in the Polish automotive sector in November’s SMMT International Update. Automotive Production in Poland 2022.

Automotive 40

Automotive Manufacturing Electronics Additive manufacturing 40

Fastener News Desk

OCTOBER 13, 2023

In 2014, the ‘Private İzmir Atatürk Organized Industrial Zone Nedim UYSAL Vocational and Technical Anatolian High School’ was proudly established under the visionary leadership of İzmir Atatürk Organized Industrial Zone Management and Norm Holding.

Logistics 59

Logistics Supply Chain Lead Time Additive manufacturing 59

Mold Making Technology

NOVEMBER 26, 2023

is a 26-year-old mold builder and molder that designs and produces injection and resin transfer molds for medical, automotive, packaging, aerospace/defense and industrial markets and also molds medical devices in high-temperature polymers plus machines metal components for aerospace/defense customers. Westminster Tool Inc.

Benchmarking 102

Benchmarking Aerospace Automation Automotive 102

E&T

MARCH 15, 2023

Candela’s story starts back in 2014, when founder and CEO Gustav Hasselskog calculated that his 28ft power boat (8.5m, but boats are usually measured in feet) used 15 times more fuel than a car for an equivalent distance travelled.

Prototype  105

Prototype  Fit Automotive Sourcing 105

Fabricating & Metal Work

OCTOBER 4, 2022

Mats Wennmo , Global Automotive Transmission Manager at the metal cutting specialist Sandvik Coromant , explains why power skiving is crucial for competitive manufacturing. Power skiving is becoming more popular, with over 700 power skiving machine tools delivered since 2014.

Manufacturing 98

Manufacturing Cycle time Lead Time Automotive 98

Robotics Business Review

FEBRUARY 8, 2024

We’ve had a lot of interest from brands, and we could extend to aerospace, automotive, and medical applications. They re-connected in 2014 to co-found Owl Labs, which makes 360° video conferencing devices. . “We’re focusing on the materials handling gaps,” he said.

Apparel 103

Apparel Robotics Robotics Prototype  103