Motion Control Tips

FEBRUARY 23, 2024

Emerson’s new PACSystems IPC 2010 Compact Industrial PC (IPC) is a rugged industrial computer designed to handle a wide range of machine and discrete part manufacturing automation applications.

Automation 62

Automation Manufacturing 62

Canadian Manufacturing

SEPTEMBER 27, 2023

The recalls cover multiple car and SUV models from the 2010 through 2019 model years including Hyundai’s Santa Fe SUV and Kia’s Sorrento SUV. Hyundai and Kia are recalling nearly 3.4 million vehicles in the U.S. and telling owners to park them outside due to the risk of engine compartment fires.

Manufacturing 85

Manufacturing 85

Manufacturing Tomorrow

MARCH 13, 2024

PACSystems IPC 2010, pre-loaded with Movicon software and PACEdge IIoT platform, delivers high-performance computing for industrial edge data visualization applications

52

52

SMMT

DECEMBER 22, 2023

UK commercial vehicle (CV) production grew again in November, according to the latest figures published today by the Society of Motor Manufacturers and Traders (SMMT). Year-to-date output surges 15.5% to 111,863 units with new production facilities boost to volumes. Factories produced 13,253 vans, buses, trucks, coaches and taxis, up 16.8%

Supply Chain 80

Supply Chain Automotive Manufacturing 80

CMTC Manufacturing Tech

OCTOBER 12, 2022

The pandemic's impact on labor and supply chains contributed to the false notion that California‘s manufacturing industry is declining, but the Golden State’s output has exceeded national averages by 83% since the 1990s. While manufacturing jobs in the state have steadily dropped from 15.6% Manufacturing Output.

Manufacturing 90

Manufacturing Industry 4.0 Industry 4.0 Aerospace 90

Dinesh Mishra

AUGUST 4, 2022

IPC India, a part of the global not-for-profit association established in the USA in 1957 represents all facets of the electronics manufacturing industry, the Integrated Electronics Manufacturing & Interconnections (IEMI) event in India. and India should interest major manufacturers from the industry. Dr. John W.

Electronics 98

Electronics Manufacturing Supply Chain Automotive 98

Manufacturer's Monthly

AUGUST 23, 2023

Boeing , the world’s largest aerospace company, has named CSIRO , Australia’s national science agency, a Supplier of the Year for the fifth time since 2010. CSIRO was previously named a Boeing Supplier of the Year in 2018, 2017, 2016 and 2010. Learn more about CSIRO’s thriving collaboration with Boeing.

Supply Chain 84

Supply Chain Aerospace Robotics Robotics 84

Manufacturer's Monthly

OCTOBER 19, 2022

In 2010, the business won its first project using Beckhoff HMI based PLC for the operation of a multi-axis window manufacturing machine. These are used by multiple manufacturing sites, specifically on pipe bending applications. Beckhoff Customer Video – AIE Global.

Process control 92

Process control Manufacturing Automation Function 92

Manufacturer's Monthly

DECEMBER 6, 2022

Manufacturers’ Monthly sits down with David Green, Sevaan Group CEO, about current trends in component manufacturing in a hectic and dynamic marketplace, challenges and how Sevaan Group is preparing to meet the highs and lows of tomorrow. Current component manufacturing trends. Challenges in component and product manufacturing.

Manufacturing 90

Manufacturing Supply Chain Sourcing Fit 90

Fabricating & Metal Work

FEBRUARY 9, 2023

The electric vehicle markets are shaping up to be more diverse as larger, established companies like Porsche compete with smaller manufacturers. The global EV landscape is also more competitive than the automotive markets of previous decades, as more manufacturers — large and small — compete for space.

Manufacturing 105

Manufacturing Computer-Aided Manufacturing (CAM) Automotive Cycle time 105

Gary Mintchell

OCTOBER 6, 2022

Not to mention all those over-educated MBAs with their spreadsheets figuring it was cheaper, and hence more profitable, to send manufacturing work overseas. If the projection is achieved, 2022 will bring the total jobs announced since 2010 to over 1.6 What if our nation’s defense was put at the mercy of a future enemy?

Supply Chain 130

Supply Chain Manufacturing 130

Automation Mag

MARCH 8, 2024

This CED support will enable Cordé Électrique, a wiring and harness manufacturer, to acquire new automated equipment to improve its productivity and ensure its expansion. Founded in 2010 by Lise Déziel, Cordé Électrique is a business specializing in the production of customized electrical harnesses.

Automation 69

Automation Manufacturing 69

Manufacturing Tomorrow

JULY 25, 2022

New ultra-compact pressure switches with IO-Link ideal for basic automation in food and beverage, water and wastewater, environmental and OEM equipment applications

Beverage 40

Beverage Automation 40

Gary Mintchell

APRIL 5, 2023

On the other hand, I always felt it foolish to ship jobs out of the country resulting in less manufacturing here. Not that I’m in favor of war, but it is the manufacturing/industrial complex that wins wars. It definitely weakens a country to not have manufacturing. manufacturing by 40%, 5 million jobs. million. ·

Supply Chain 130

Supply Chain Manufacturing 130

Modern Machine Shop

NOVEMBER 15, 2023

Herendeen began his 20-year career in the manufacturing industry as a sales engineer with a Midwest Mitsubishi Laser distributor, followed by running his own manufacturing consulting company for several years. MC Machinery Systems Inc. has promoted Shane Herendeen to fabrication division vice president of sales.

Automation 105

Automation Manufacturing 105

Gary Mintchell

JUNE 5, 2023

Martin’s Press, 2010) and the CEO of Calibriate, a deception detection and inside threat mitigation consulting firm. The post Four Ways to Build a Culture of Honesty and Avoid ‘Productivity Paranoia’ appeared first on The Manufacturing Connection. Let people know what you are doing, where you are going, and how they stand with you.

Manufacturing 147

Manufacturing 147

Canadian Manufacturing

MARCH 15, 2024

Nissan is relatively ahead in EVs among Japanese automakers because it was among the first to come out with an EV with its Leaf, which went on sale in late 2010. But Toyota is also expected to aggressively deliver on an EV push in coming years.

Supply Chain 94

Supply Chain Automotive Manufacturing 94

Manufacturer's Monthly

MARCH 20, 2023

First held in 2010 and alternating between Melbourne and Sydney, Electronex is Australia’s major exhibition for companies using electronics in design, assembly, manufacture and service in Australia. The post Electronex co-locates with AMW at the MCEC this May appeared first on Manufacturers' Monthly.

Electronics 93

Electronics Manufacturing 93

Modern Machine Shop

FEBRUARY 22, 2023

Photo Credit: Reshoring Initiative United Grinding North America announces its sponsorship of the Reshoring Initiative , a nonprofit organization dedicated to bringing manufacturing jobs back to the United States. Our mission is to reverse offshoring and bring five million manufacturing jobs to the U.S.”

Supply Chain 98

Supply Chain Lead Time Manufacturing 98

Mold Making Technology

APRIL 11, 2024

has experienced an unprecedented 14 years of manufacturing employment growth as millions of jobs have been reshored, according to the U.S. The number of jobs reshored per year has increased from 6,000 in 2010 to 350,000 in 2022. Manufacturing employment has seen unprecedented growth, making careers in the industry more desirable.

Six Sigma 59

Six Sigma Sourcing Freight Cycle time 59

Gary Mintchell

AUGUST 16, 2023

It was 2009 and again in 2010. The post Humanity-Centered Design appeared first on The Manufacturing Connection. Human-centered design. Designing products as if humans were going to use them. Designing human-machine interface in ways that make it easier to see what’s going on. Emerson Global Users Exchange.

Manufacturing 130

Manufacturing 130

MEM

JUNE 15, 2023

The solutions on the stand will include easy-to-program machine-tending robots and more sophisticated automation to support the trend towards high-mix, low-volume manufacturing and the demand for 5-axis automation. To register for complimentary tickets courtesy of Mazak, or schedule an appointment on the Mazak stand, please visit: [link].

Advanced manufacturing 52

Advanced manufacturing Manufacturing Automation Form 52

Canadian Manufacturing

APRIL 24, 2024

“In 2010, SIIT laid the foundation for what has become a long-standing partnership with Boeing with their initial support of the SALC,” explained Riel Bellegarde, President and CEO of SIIT.

Aerospace 59

Aerospace Manufacturing 59

Fabricating & Metal Work

MAY 4, 2023

With experience in the manufacturing industry dating back to the age of 13, Mazak President Dan Janka once again has accepted the position of chairman of the board of The Association of Manufacturing Technology (AMT). Janka, an AMT member since 2005, last served as chairman in 2010.

Manufacturing 52

Manufacturing Composites 52

Robotics Business Review

DECEMBER 27, 2023

Neato (2005-2023) Robot vacuum manufacturer Neato Robotics was shut down by parent company Vorwek Group in April. It was negotiating with Henny Penny, a food-service equipment manufacturer, but the talks fell apart. PrecisionHawk (2010-2023) PrecisionHawk, a Raleigh, N.C.-based Neato was acquired by Vorwek Group in 2017.

Robotics 121

Robotics Robotics Automation Manufacturing 121

ATS

JUNE 15, 2023

Share Reshoring has been one of the top manufacturing trends discussed over the past decade. What is reshoring in manufacturing? The term refers to the practice of bringing offshore production processes – those carried out in a country other than a manufacturer’s home country — back to domestic facilities.

Manufacturing 52

Manufacturing Supply Chain Logistics Industry 4.0 52

WMEP

JUNE 8, 2022

ExporTech™ program can help Author: Dan Steininger, Milwaukee BizTimes, Reprinted from 10/11-24, 2010 Every business leader knows the number one task is to continue to grow revenues on a profitable basis. The post Right approach crucial to maximize international sales appeared first on WMEP Manufacturing Solutions.

Manufacturing 52

Manufacturing 52

Canadian Manufacturing

JANUARY 2, 2024

He has served in various engineering and management roles at Weichai Power since 2010. Michael Chen currently serves as the CEO of Weichai Ballard Hy-energy Technologies Co. and Vice General Manager of Weichai Holding Group. Mr. Chen earned a PhD in Power Engineering and Engineering Thermophysics from Tsinghua University.

Manufacturing 73

Manufacturing 73

Mold Making Technology

MAY 4, 2023

Manufacturing job announcements per year, Reshoring + FDI, 2010 thru 2022. The total number of jobs announced since 2010 is now nearly 1.6 manufacturing by domestic and foreign companies surged after President Biden’s Inflation Reduction Act and Chips and Science Act were passed. It is said new investments in U.S.

Supply Chain 52

Supply Chain Sourcing Manufacturing 52

Manufacturer's Monthly

NOVEMBER 8, 2023

Renowned UK flexible packaging manufacturer Roberts Mart is entering the Australian market with the launch of a new product set to improve disposal of home compostable flexible packaging materials. BiyoTM is a home compostable packaging mono material that can be run on conventional packing lines.

Form 74

Form Manufacturing 74

SMMT

JANUARY 24, 2024

UK vehicle production hit 1,025,474 units in 2023, according to the latest figures published today by the Society of Motor Manufacturers and Traders (SMMT). 1 Strong December performances for both car manufacturing, up 20.7% 1 Strong December performances for both car manufacturing, up 20.7% on the previous year.

Supply Chain 144

Supply Chain Automotive Manufacturing Advanced manufacturing 144

Canadian Manufacturing

OCTOBER 19, 2023

In 2010, a separate report recommended that the labour minister implement a commission to address what it called the “existing unsatisfactory relationship” between the two sides at the ports. No work was ever done to implement that recommendation. ” O’Regan would not say what potential changes would be.

Cargo 97

Cargo Supply Chain Automation Manufacturing 97

Canadian Manufacturing

MARCH 8, 2024

Founded in 2010 by Lise Déziel, Cordé Électrique is a business specializing in the production of customized electrical harnesses. For several years now, the manufacturing SME has struggled to meet demand, this despite several investments in its fleet of equipment.

Automation 40

Automation Manufacturing Advanced manufacturing 40

AU Manufacturing

JUNE 26, 2023

Australian drone manufacturer Orbital UAV has secured a $1.5 He added, “We are grateful to the WA government for its continued support as we strengthen our position as a global leader in the design and manufacture of propulsion systems for military UAVs.” The post Orbital UAV clinches $1.5m

Manufacturing 52

Manufacturing 52

Canadian Manufacturing

APRIL 16, 2024

Nissan was an EV pioneer, introducing the all-electric Leaf in 2010. They said the company had come up with key, unique materials for the batteries, including a metal form of lithium. The company said it plans to offer solid-state batteries in a range of models, including pickup trucks. “We

Form 52

Form Supply Chain Automotive Manufacturing 52

Canadian Manufacturing

OCTOBER 31, 2023

In 2010, BHP launched a hostile takeover bid for Potash Corp., The world’s largest fertilizer maker, Canadian company Nutrien Inc., operates six potash mines in Saskatchewan. Nutrien was created through the merger of Agrium Inc. and Potash Corp. of Saskatchewan in 2018.

Manufacturing 105

Manufacturing 105

Mold Making Technology

MARCH 21, 2023

Our Leadtime Leader Awards honor excellence in mold manufacturing, and this is your year to join the ranks of our past honorees. 2003 Advance Tool, Inc. Thinking Outside the Box 2006 Extreme Tool and Engineering: Building Relationships, Fostering Growth 2006 A.J. .: Innovation with Automation Large Shop Honorable Mention H.S. .:

Automation 52

Automation Lead Time Manufacturing 52