Canadian Manufacturing

FEBRUARY 3, 2023

DesRosiers Automotive Consultants Inc. The automotive industry research firm estimates 98,259 new light vehicles were sold by reporting manufacturers in January. DAC says it is seeing signs of improved vehicle availability at a growing list of manufacturers. DAC) says light vehicle sales in Canada in January were up 7.5

Automotive 40

Automotive Manufacturing 40

Automation Mag

SEPTEMBER 7, 2023

“Rockwell and Clearpath together will simplify the difficult and labour-intensive task of moving materials and product through an orchestrated and safe system to optimize operations throughout the entire manufacturing facility,” said Blake Moret, chairman and CEO, of Rockwell Automation.

Robotics 107

Robotics Robotics Automation Artificial Intelligence 107

Canadian Manufacturing

APRIL 6, 2023

Peter has over 35 years of experience working in the automotive industry. He was previously the Chief Financial Officer for Nissan Motor Corporation from 2009 to 2018. MONTREAL — NanoXplore Inc., a graphene company, appointed Joseph G. Peter as a member on the Board of Directors.

Automotive 52

Automotive Manufacturing 52

Canadian Manufacturing

AUGUST 23, 2023

QUEBEC CITY and AUBURN HILLS — FLO, a North American electric vehicle (EV) charging company and a smart charging solutions provider, was selected as a finalist in two categories for the 2023 Reuters Automotive D.R.I.V.E This category honors organizations driving innovation within the automotive industry.

Automotive 52

Automotive Manufacturing 52

Fastener News Desk

MAY 4, 2023

Chair of the Institute for Supply Management ® (ISM ® ) Manufacturing Business Survey Committee: “The April Manufacturing PMI ® registered 47.1 Chair of the Institute for Supply Management ® (ISM ® ) Manufacturing Business Survey Committee: “The April Manufacturing PMI ® registered 47.1 percent, 0.8

Manufacturing 52

Manufacturing Supply Chain Electronics Beverage 52

Canadian Manufacturing

MARCH 22, 2024

safety regulators that moisture may get into the inflators due to a manufacturing defect and cause corrosion and cracks. by Takata inflators since May 2009, and at least 30 have died worldwide including people in Malaysia and Australia. The automaker says in documents posted on Mar. At least 26 people have been killed in the U.S.

Manufacturing 59

Manufacturing Compliance Automotive 59

Fastener News Desk

APRIL 3, 2023

Chair of the Institute for Supply Management ® (ISM ® ) Manufacturing Business Survey Committee: “The March Manufacturing PMI ® registered 46.3 Chair of the Institute for Supply Management ® (ISM ® ) Manufacturing Business Survey Committee: “The March Manufacturing PMI ® registered 46.3 percent, 1.4

Manufacturing 52

Manufacturing Supply Chain Apparel Lead Time 52

Plastics News

AUGUST 1, 2023

Their vast experience in manufacturing injection molded plastic parts enables supply and capacity of over 200 million products annually. Don Thomas, General Manager of Quantum, oversees the company’s manufacturing operations. The company footprint is over 1.3 The company footprint is over 1.3 improving its molding output).

Cargo 98

Cargo Supply Chain Aerospace Automotive 98

Robotics Business Review

APRIL 17, 2024

Boston Dynamics began with humanoids by sawing one of its pneumatically powered quadrupeds in half back in 2009. ” In the new video below, the previous version of Atlas handles automotive parts and real products weighing up to 25 lb. By 2016, the Waltham, Mass.-based

Robotics 123

Robotics Robotics Artificial Intelligence Automotive 123

Canadian Manufacturing

AUGUST 5, 2022

In 2009, Mr. Aiken was awarded a Master of Business Administration (MBA) degree from Queens University. From 2014 through 2019 Mr. Aiken served as a management consultant for the Automotive sector, across North America focusing on strategy, marketing and distribution growth in preparation for M&A activities.

Automotive 52

Automotive Manufacturing 52

Canadian Manufacturing

JANUARY 3, 2023

a manufacturer and distributor of zero-emission, electric-powered, medium and heavy-duty vehicles, announced that Claus C. ” Tritt began his automotive career as a sales consultant for a Mercedes-Benz owned retail store. LOS ANGELES — GreenPower Motor Company Inc., market under the coveted Mercedes-Benz brand. ”

Automotive 40

Automotive Manufacturing 40

Plastics News

JULY 25, 2022

On June 2nd, ENGEL and partner SABIC, a leading global materials producer, hosted the 2022 trend.scaut Automotive Conference. Presentations and discussions were held in the morning at the Sheraton Detroit in Novi, Michigan, with onsite molding demonstrations shown in the afternoon at SABIC’s Automotive Development Center in nearby Wixom.

Automotive 52

Automotive Composites Value chain Form 52

SMMT

JULY 27, 2022

UK car manufacturing falls -19.2% in the first six months of the year, according to figures published today by the Society of Motor Manufacturers and Traders (SMMT), with 95,792 fewer vehicles built compared with the same period in 2021. 1: HY1 2020: 381,357 – HY1 2009: 410,740. Latest independent outlook targets 1.2%

Supply Chain 64

Supply Chain Automotive Manufacturing 64

Canadian Manufacturing

MAY 4, 2023

” Since 2009, the exploding air bags made by Takata have killed at least 33 people worldwide, including 24 in the United States. Since 2009, the exploding air bags have killed at least 33 people worldwide, including 24 in the United States. Most of the deaths and about 400 injuries have happened in U.S.,

Compliance 75

Compliance Automotive Manufacturing 75

Manufacturer's Monthly

AUGUST 16, 2023

Manufacturers’ Monthly delves into the Portalift range and how it can benefit the automotive service industry. Endurequip Hoists has been part of RUD Australia since 2015 and all Endurequip products are manufactured at the RUD facility in Brisbane at its state-of-the-art 6000 square-metre factory.

Logistics 60

Logistics Automotive Manufacturing 60

Canadian Manufacturing

MAY 31, 2023

-based EV startup was founded in 2009 by RJ Scaringe, the company’s CEO. It also manufactures electric delivery vans for Amazon, one of its largest investors. The company initially produced electric powertrains for other EV manufacturers. When it rebranded to Lucid Motors in 2016, this U.S.-based

Automotive 40

Automotive Manufacturing Supply Chain 40

Canadian Manufacturing

OCTOBER 11, 2022

11 that it plans to sell its Russian operations to its local partner and withdraw from manufacturing there. Petersberg in 2009. It suspended manufacturing in Russia in March after the invasion of Ukraine. Japanese automaker Nissan Motor Co. said on Oct. The sale includes Nissan’s factory and R&D facilities in St. .

Manufacturing 52

Manufacturing Supply Chain Compliance Automotive 52

Canadian Manufacturing

AUGUST 1, 2023

National Highway Traffic Safety Administration that the driver’s front air bag inflator can explode in a crash due to a manufacturing defect. by the inflators since May of 2009, and more than 30 have died worldwide including people in Malaysia and Australia. He said he couldn’t give details of the manufacturing defect.

Manufacturing 75

Manufacturing Supply Chain Compliance Automotive 75

Canadian Manufacturing

MAY 19, 2023

And because of a dispute between federal safety regulators and an airbag parts manufacturer, they aren’t likely to find out anytime soon. The explosions, which first occurred in 2009, have continued as recently as this year. Few of them know it. Some vehicles have ARC inflators on both sides.)

Automotive 40

Automotive Manufacturing Compliance 40

MEM

APRIL 19, 2023

MGI Engineering’s prowess stems from its decades of experience at the pinnacle of motorsport, Formula 1 – a tenure that is reflected through its senior staff and its CEO Mike Gascoyne himself – who has previously worked at McLaren, Tyrrell, Sauber, Renault, Toyota before setting up the Lotus F1 Team through MGI in 2009.

Cargo 52

Cargo Composites Aerospace Automotive 52

Canadian Manufacturing

JANUARY 31, 2024

by Takata inflators since May 2009, and at least 30 have died worldwide including people in Malaysia and Australia. But the chemical propellant can deteriorate over time when exposed to high temperatures and humidity. It can explode with too much force, blowing apart a metal canister and spewing shrapnel.

Automotive 40

Automotive Manufacturing 40

Dinesh Mishra

JANUARY 18, 2024

In 2009, we started the production of surface conditioning abrasives under the brand name VALGRO. Deburring remains an important and recommended finishing aspect throughout the manufacturing industry. The manufacture of sprockets, gears, camshafts, and other parts depends on the trimming and polishing inherent in the deburring process.

Form 52

Form Aerospace Manufacturing Automotive 52

Frost & Sullivan Manufacturing

FEBRUARY 28, 2024

Click here to learn more Ridecell : A transformative player in the ecosystem since 2009, Ridecell has furthered various innovative fleet management solutions, including keyless access and digital vehicle control. What measures is your organization taking to enhance automotive safety and bridge the growth gap ?

Benchmarking 52

Benchmarking Artificial Intelligence Automotive Function 52

Canadian Manufacturing

JANUARY 26, 2023

Toyoda, who took over as CEO of Toyota in 2009, and is an avid racer, has seen the company through various hard times, like the global financial crisis and the massive recall scandal in the U.S., Toyota Motor Corp. over “unintended acceleration,” in 2010, when he appeared before Congress.

Prototype  40

Prototype  Supply Chain Manufacturing Automotive 40

Automation Mag

DECEMBER 13, 2022

W hen searching for an automation solution, Leggett & Platt wanted a manufacturer they could build a lasting relationship with. Systematix was founded in 1988 from an industrial fastener company to an automation integrator for window and door manufacturers. Leggett & Platt was looking for a supportive partner for the project.

Automation 52

Automation Cycle time Robotics Robotics 52

Canadian Manufacturing

JANUARY 9, 2023

from 2009 to 2016. With Canadian and Mexican manufacturers added in the 11th hour to Biden’s plan to encourage the sale of climate-friendly electric vehicles, there will be room to talk about more familiar irritants like trade disputes and U.S. Then-prime minister Stephen Harper got plenty of one-on-one face time with U.S.

Automotive 40

Automotive Supply Chain Manufacturing Compliance 40

Dinesh Mishra

NOVEMBER 30, 2023

The Making of an Icon Established in 1962, Lakshmi Machine Works Limited (LMW) stands as a prominent Indian textile machinery manufacturer, uniquely positioned globally as one of three producing the complete range of textile spinning machinery. Lakshmi Machine Works (LMW) Limited is a leading textile spinning machinery manufacturer.

Supply Chain 52

Supply Chain Aerospace Automotive Cycle time 52

Foley

JULY 11, 2023

Agility and resiliency remain essential attributes for manufacturers in 2023. Manufacturers are no longer focused on figuring out when things will return to “normal.” While these two trends are common across many industries, perhaps nowhere are they more pronounced than in the automotive industry.

Manufacturing 40

Manufacturing Compliance Supply Chain Form 40

Fabricating & Metal Work

SEPTEMBER 28, 2022

More than most industries, aerospace component manufacturing machines a lot of exotic alloys and hard metals like titanium. According to Manufacturing Engineer Peter Bowman , “Many of our space flight fittings require tight-tolerance features. thus requiring replacement on a regular basis.

Aerospace 52

Aerospace Fit Manufacturing Automotive 52