Mold Making Technology

FEBRUARY 1, 2024

In 2009, he earned certifications as both a machinist and moldmaker, a testament to his commitment to skill development. Corey’s roots in the company run deep, with his grandfather, Alton Fox, founding Accede Mold & Tool in 1981. He is process-driven and quality-conscious in all aspects of his work.”

Automotive 111

Automotive Manufacturing 111

Canadian Manufacturing

FEBRUARY 3, 2023

DesRosiers Automotive Consultants Inc. The automotive industry research firm estimates 98,259 new light vehicles were sold by reporting manufacturers in January. The January sales come after a 2022 that saw the lowest annual sales total since 2009. DAC) says light vehicle sales in Canada in January were up 7.5

Automotive 40

Automotive Manufacturing 40

Automation Mag

SEPTEMBER 7, 2023

The combination of autonomous robots and PLC-based line control has long been a dream of plant managers in industries as diverse as automotive and consumer packaged goods. Founded in 2009, Clearpath got its start offering robotics technology to global research and development markets, and in 2015, launched its OTTO Motors Division.

Robotics 107

Robotics Robotics Automation Artificial Intelligence 107

Canadian Manufacturing

AUGUST 23, 2023

QUEBEC CITY and AUBURN HILLS — FLO, a North American electric vehicle (EV) charging company and a smart charging solutions provider, was selected as a finalist in two categories for the 2023 Reuters Automotive D.R.I.V.E This category honors organizations driving innovation within the automotive industry.

Automotive 52

Automotive Manufacturing 52

Robotics Business Review

APRIL 17, 2024

Boston Dynamics began with humanoids by sawing one of its pneumatically powered quadrupeds in half back in 2009. ” In the new video below, the previous version of Atlas handles automotive parts and real products weighing up to 25 lb. By 2016, the Waltham, Mass.-based

Robotics 118

Robotics Robotics Artificial Intelligence Automotive 118

Canadian Manufacturing

MARCH 22, 2024

by Takata inflators since May 2009, and at least 30 have died worldwide including people in Malaysia and Australia. In five cases investigated by the company, the air bags inflated while the vehicles were parked when the cabin temperature was above 120 degrees Fahrenheit (49 degrees Celsius). At least 26 people have been killed in the U.S.

Manufacturing 59

Manufacturing Compliance Automotive 59

Canadian Manufacturing

MAY 4, 2023

” Since 2009, the exploding air bags made by Takata have killed at least 33 people worldwide, including 24 in the United States. Since 2009, the exploding air bags have killed at least 33 people worldwide, including 24 in the United States. Most of the deaths and about 400 injuries have happened in U.S.,

Compliance 75

Compliance Automotive Manufacturing 75

Plastics News

JULY 25, 2022

On June 2nd, ENGEL and partner SABIC, a leading global materials producer, hosted the 2022 trend.scaut Automotive Conference. Presentations and discussions were held in the morning at the Sheraton Detroit in Novi, Michigan, with onsite molding demonstrations shown in the afternoon at SABIC’s Automotive Development Center in nearby Wixom.

Automotive 52

Automotive Composites Value chain Form 52

Canadian Manufacturing

JANUARY 3, 2023

” Tritt began his automotive career as a sales consultant for a Mercedes-Benz owned retail store. After 30 years of service with Mercedes-Benz, Tritt returned to the retail side of the automotive business, operating a luxury car dealership in Birmingham, Alabama. market under the coveted Mercedes-Benz brand. ”

Automotive 40

Automotive Manufacturing 40

Canadian Manufacturing

AUGUST 5, 2022

In 2009, Mr. Aiken was awarded a Master of Business Administration (MBA) degree from Queens University. From 2014 through 2019 Mr. Aiken served as a management consultant for the Automotive sector, across North America focusing on strategy, marketing and distribution growth in preparation for M&A activities.

Automotive 52

Automotive Manufacturing 52

Manufacturer's Monthly

AUGUST 16, 2023

Manufacturers’ Monthly delves into the Portalift range and how it can benefit the automotive service industry. The Portalift vehicle hoists from Endurequip were recently featured throughout the Australian Made Campaign.

Logistics 92

Logistics Automotive Manufacturing 92

SMMT

JULY 27, 2022

403,131 units were built, representing the weakest first half since the pandemic-ravaged 2020 and worse than 2009 when the global financial crisis decimated demand.1 1: HY1 2020: 381,357 – HY1 2009: 410,740. UK car production declined -19.2% Notes to editors. 2: June 2019: 109,226.

Supply Chain 64

Supply Chain Automotive Manufacturing 64

Plastics News

AUGUST 1, 2023

Quantum/M&M maintains an extensive customer base that includes major catalog organizations, material handling and distribution groups, consumer stores and outlets, window and door manufacturers, automotive, heating and air conditioning manufacturers, food service and medical supply, US Government, aerospace assembly and many others.

Cargo 98

Cargo Supply Chain Aerospace Automotive 98

Canadian Manufacturing

JANUARY 31, 2024

by Takata inflators since May 2009, and at least 30 have died worldwide including people in Malaysia and Australia. But the chemical propellant can deteriorate over time when exposed to high temperatures and humidity. It can explode with too much force, blowing apart a metal canister and spewing shrapnel.

Automotive 40

Automotive Manufacturing 40

Canadian Manufacturing

MAY 31, 2023

based EV startup was founded in 2009 by RJ Scaringe, the company’s CEO. was started in 2016 by automotive designer Henrik Fisker, who formerly ran the now-defunct Fisker Automotive. A lack of nationwide service support might be another issue. RIVIAN This adventure-bound, U.S.-based

Automotive 40

Automotive Manufacturing Supply Chain 40

Canadian Manufacturing

OCTOBER 11, 2022

Petersberg in 2009. . “While we cannot continue operating in the market, we have found the best possible solution to support our people,” Nissan President and CEO Makoto Uchida said in a statement. Nissan began making SUVs in St. It suspended manufacturing in Russia in March after the invasion of Ukraine.

Manufacturing 52

Manufacturing Supply Chain Compliance Automotive 52

Canadian Manufacturing

AUGUST 1, 2023

by the inflators since May of 2009, and more than 30 have died worldwide including people in Malaysia and Australia. But the chemical can deteriorate over time and explode with too much force, blowing apart a metal canister and spewing shrapnel. At least 26 people have been killed in the U.S. In addition, about 400 people have been injured.

Manufacturing 75

Manufacturing Supply Chain Compliance Automotive 75

MEM

APRIL 19, 2023

MGI Engineering’s prowess stems from its decades of experience at the pinnacle of motorsport, Formula 1 – a tenure that is reflected through its senior staff and its CEO Mike Gascoyne himself – who has previously worked at McLaren, Tyrrell, Sauber, Renault, Toyota before setting up the Lotus F1 Team through MGI in 2009.

Cargo 52

Cargo Composites Aerospace Automotive 52

Canadian Manufacturing

MAY 19, 2023

The National Highway Traffic Safety Administration is demanding that the manufacturer, ARC Automotive of Knoxville, Tennessee, recall 67 million inflators that could explode with such force as to blow apart a metal canister and expel shrapnel. The explosions, which first occurred in 2009, have continued as recently as this year.

Automotive 40

Automotive Manufacturing Compliance 40

Frost & Sullivan Manufacturing

FEBRUARY 28, 2024

Click here to learn more Ridecell : A transformative player in the ecosystem since 2009, Ridecell has furthered various innovative fleet management solutions, including keyless access and digital vehicle control. What measures is your organization taking to enhance automotive safety and bridge the growth gap ?

Benchmarking 52

Benchmarking Artificial Intelligence Automotive Function 52

Canadian Manufacturing

JANUARY 26, 2023

Toyoda, who took over as CEO of Toyota in 2009, and is an avid racer, has seen the company through various hard times, like the global financial crisis and the massive recall scandal in the U.S., Toyota Motor Corp. over “unintended acceleration,” in 2010, when he appeared before Congress.

Prototype  40

Prototype  Supply Chain Manufacturing Automotive 40

Dinesh Mishra

JANUARY 18, 2024

In 2009, we started the production of surface conditioning abrasives under the brand name VALGRO. During this time, I started a small trading firm for the supply of industrial products. It was a small setup. By 2005, the start-up had grown into a company called Valgro Engineers Private Limited, which imported abrasives from Europe.

Form 52

Form Aerospace Manufacturing Automotive 52

Fastener News Desk

MAY 4, 2023

percent recorded in March; this is the index’s lowest reading since March 2009 (43.2 ” [Electrical Equipment, Appliances & Components] “Business is picking up a bit in the automotive and construction industries — not on par with 2022 but beginning to look better.” percent is 0.2 percentage points to 46.3

Manufacturing 52

Manufacturing Supply Chain Electronics Beverage 52

Fastener News Desk

APRIL 3, 2023

percent recorded in February; this is the index’s lowest reading since March 2009 (43.2 However, sales volume is pulling down our automotive original equipment manufacturer (OEM) side, which is the majority of our business. The Supplier Deliveries Index figure of 44.8 percent is 0.4 percentage point lower than the 45.2

Manufacturing 52

Manufacturing Supply Chain Apparel Lead Time 52

Automation Mag

DECEMBER 13, 2022

In 1993, machine designer Cecil Bauman joined original owner Steve Errey until Errey’s retirement in 2009. Although the company’s customer base has changed over the years, decades later many of these original machines are still in service. In 2021 Bauman retired and the company was acquired by Samuel Son & Co. .

Automation 52

Automation Cycle time Robotics Robotics 52

Canadian Manufacturing

JANUARY 9, 2023

from 2009 to 2016. isn’t playing fair when it comes to how it defines foreign content in its automotive supply chains. Then-prime minister Stephen Harper got plenty of one-on-one face time with U.S. counterpart Barack Obama the last time the summit took place in Mexico in 2014, Doer recalled.

Automotive 40

Automotive Supply Chain Manufacturing Compliance 40

Dinesh Mishra

NOVEMBER 30, 2023

In 2009, after completing the Advanced Management Program at Harvard Business School, I moved to China to establish and head LMW’s greenfield project for manufacturing textile spinning machinery. We take pride in serving leading OEMs and auto ancillaries in the automotive industry, a testament to the consistency of our quality.

Supply Chain 52

Supply Chain Aerospace Automotive Cycle time 52

i4.0 today

AUGUST 17, 2022

To learn more, the new IDTechEx report, “ Electric Cars 2023-2043 “, provides a deep dive into future automotive markets with granular forecasts. Moreover, in August 2022, plans to modernize the EV federal tax credit, first introduced in 2009, have narrowly been passed. million, according to IDTechEx research.

Electronics 52

Electronics Automotive Sourcing Industry 4.0 52

Fabricating & Metal Work

SEPTEMBER 28, 2022

A leading manufacturing innovator of CNC mill spindle optimization products since 2009, JMPP’s retention knobs feature a relief beneath the precision pilot that forces the threads of the knob deeper into the threaded bore of the toolholder–where a thicker cross-section of material resists the expansion and deformation.

Aerospace 52

Aerospace Fit Manufacturing Automotive 52

Foley

JULY 11, 2023

While these two trends are common across many industries, perhaps nowhere are they more pronounced than in the automotive industry. Beyond the automotive industry, even the most basic household appliances are now wireless and connected. New companies may have limited resources and expertise necessary to overcome hurdles that may arise.

Manufacturing 40

Manufacturing Compliance Supply Chain Form 40