ATS

FEBRUARY 20, 2023

Cybersecurity: With the advent of the connected facility, cybersecurity has become a major concern. Most important is to view AI as a long-term solution, where the proper foundation can be iterated upon to yield massive benefits over forthcoming years.

Artificial Intelligence 98

Artificial Intelligence Manufacturing Pharmaceutical Automation 98

Canadian Metalworking Magazine

APRIL 29, 2020

It works just like Leo’s other prioritization parameters such as keywords, topics, and events. Coronavirus’ and ‘COVID-19’ are just two of the terms he recognizes. Here’s a few examples to show how Leo’s coronavirus topic might work for you. You can prioritize COVID-19 subjects by entering it as a topic.

Pharmaceutical 61

Pharmaceutical Sourcing Automotive 61

Control Engineering

FEBRUARY 22, 2023

Trustworthiness is the combination of cybersecurity, privacy and confidentiality, in their terms). All this information provides a map of the topic area and turns a headwind into a tailwind. Of those they identified, three stand out for industrial verticals: Trustworthiness, interoperability and talent.

Supply Chain 122

Supply Chain Artificial Intelligence Manufacturing Industry 4.0 122

Canadian Metalworking Magazine

SEPTEMBER 6, 2022

They also needed a system to get alerted when key topics came up, without drowning in the noise of irrelevant data. “We When Tino and his team identify a new “fuzzy concept” or broader trend that they want to research and define, they set up a new Feedly Board on the topic and add relevant articles from other boards.

Sourcing 84

Sourcing Logistics Form 84

E&T

OCTOBER 18, 2022

A facility’s EPMS and BMS data is also safer in the cloud, thanks to the best-in-class cybersecurity of leading cloud providers. And you don’t have to worry about owning an aging computer that needs replacing, or software that hasn’t been updated with the latest cybersecurity patch.

Function 81

Function Automation 81

Canadian Manufacturing

MAY 15, 2024

This year’s Baromètre industriel québécois focused on key topics such as succession planning, business profitability, and environmental commitments, highlighting the importance of effective business practices, including investments and the integration of digital technologies.

Manufacturing 52

Manufacturing Supply Chain Advanced manufacturing 52

Control Engineering

JULY 12, 2023

assessment, akin to a safety risk assessment or cybersecurity assessment? This term was famously announced in 2011 at Hannover Fair as part of the German High-Tech Strategy, and since then it has taken hold across the world. or are those using that term merely suggesting that the world isn’t moving quickly enough? opportunities.

Industry 4.0 98

Industry 4.0 Industry 4.0 Smart manufacturing Manufacturing 98

Control Engineering

FEBRUARY 8, 2023

Some answers on topics included artificial intelligence and machine learning (AI/ML), integration of new technologies and cybersecurity and more that were not answered during the live webcast. Rausch : Cybersecurity will be critical in all aspects of work and life going forward. cybersecurity, etc.

Automation 52

Automation Industry 4.0 Industry 4.0 Artificial Intelligence 52

ATS

JUNE 18, 2024

In broad terms, five types of industrial sensors are used on manufacturing equipment. Corrosion monitoring sensors use different physical principles to gather data for long-term trend tracking. Data accessibility: As with other remote monitoring systems, cybersecurity should be a top priority, especially with cloud-based solutions.

Beverage 59

Beverage Artificial Intelligence Manufacturing Automation 59

Automation Mag

NOVEMBER 4, 2024

Based on responses from 1000 professionals, in 17 countries, operating in 20 industrial sectors, the report highlights topics such as cybersecurity urgency, IT/OT convergence and the anticipated impact of AI, among other things. How do these obstacles impact cybersecurity health?

Automation 40

Automation Supply Chain Manufacturing 40

Automation Mag

SEPTEMBER 23, 2024

Isn’t it weird that only a few of them have adjusted their long-term strategies to fully leverage AI’s potential? They are trained to implement robust cybersecurity measures and to adopt AI-specific security solutions. They understand the necessity for growth, and they see the adoption of this technology as essential to reach it.

Automation 59

Automation Manufacturing Artificial Intelligence 59

Control Engineering

MAY 7, 2023

Connecting workers with all this information has cultural and security concerns, but manufacturers dedicated to finding a solution will reap long-term benefits in an environment that is getting more fast-paced. Manufacturers have access to more information than ever as their world is more interconnected.

Manufacturing 52

Manufacturing Artificial Intelligence Industry 4.0 Industry 4.0 52

E&T

OCTOBER 3, 2023

These partnerships give students the chance to upskill through personalised curriculums designed by experts and covering a wide range of technology topics that are most relevant to the current job market. These certifications help younger workers demonstrate their dedication to building in-demand skill sets.

59

59

i4.0 today

SEPTEMBER 12, 2023

In terms of numbers, across all UK businesses, there were 2.4 According to Cybersecurity Ventures, the cost of cybercrime to business could reach £8.4 The report – Effective Board Governance of Cyber Security: A source of competitive advantage – is published by Savanti, one of the UKs leading cyber security consultancies.

Sourcing 52

Sourcing Industry 4.0 Industry 4.0 52

CMTC Manufacturing Tech

JUNE 8, 2023

This resiliency drives the first blog in a three-part series based on our recent webinar topic, “ Survival Strategies amid Supply Chain Disruptions & Economic Uncertainty.” Given these threats, effective risk management has become essential for manufacturers to foster supply chain resiliency.

Supply Chain 74

Supply Chain Sourcing Value chain Form 74

Frost & Sullivan Manufacturing

JANUARY 21, 2024

In terms of manufacturing, it can promote advances in production design, processes, and output as well as quality control. Over the near term, ChatGPT will transform in-vehicle experiences in terms of personalization, human machine interface (HMI), and navigation assistance.

Supply Chain 52

Supply Chain Automotive Manufacturing Value chain 52

ATS

MAY 10, 2023

That component of the manufacturing industry outlook is derived from several underlying — and in some cases, ongoing — industry and macroeconomic factors that may threaten sustained growth in the near term. The longer-term outlook, through the next 12 to 18 months, may present more difficulty.

Manufacturing 52

Manufacturing Supply Chain Industry 4.0 Industry 4.0 52

Cisco Smart Manufacturing

JUNE 21, 2018

These included: Cybersecurity. I also invite you to explore the following manufacturing topics: Cisco Connected Factory. The report noted five key insights and areas that manufacturers in the middle market are focusing on, these include: Competition. Supply chain relationships. Changing product/service mix. New materials/composites.

Supply Chain 52

Supply Chain Manufacturing Rapid prototyping Smart manufacturing 52

Control Engineering

JULY 20, 2022

The expanse of DX and IIoT topics can be overwhelming even to someone more experienced on the OT side. The term “edge” is misleading because it is at the center of so much. Common services (3-1 in Figure 4) include cybersecurity and identity management services that provide secure access to data, but only to valid users.

Artificial Intelligence 105

Artificial Intelligence Function Value chain Automation 105

Control Engineering

SEPTEMBER 27, 2022

A: Eventually, yes, but it’s not on the short-term road map. Using Git for PLC workflows: Training, cybersecurity, cloud. A: We have a blog on this topic. It does not render binary files other than PLC code. Q: Do you plan on supporting the AutomationDirect PLC development platforms (Do-More, Click, Productivity). A: Not yet.

Automation 52

Automation Sourcing Discrete manufacturing Manufacturing 52

Dinesh Mishra

JULY 17, 2024

This year’s focus is on productivity-enhancing technology, presenting the latest the market has to offer in terms of increasing output and efficiency while aligning individual production processes to the complex demands of smart manufacturing.

Smart manufacturing 52

Smart manufacturing Form Benchmarking Robotics 52

Canadian Manufacturing

OCTOBER 2, 2024

” That problem is a lack of ambition that Harley Finkelstein described as hampering the growth and long-term success of Canadian companies, the country’s tech ecosystem and its broader economy. The president of e-commerce giant Shopify Inc. is calling on Canada to address a problem he calls “the 600-pound beaver in the room.”

Artificial Intelligence 40

Artificial Intelligence Supply Chain Manufacturing Compliance 40

Control Engineering

APRIL 20, 2023

Topics of emphasis included artificial intelligence and machine learning, carbon-neutral production, energy management, hydrogen and fuel cells and Industrie 4.0. Halls 14-17 had a stronger emphasis on cybersecurity, cloud computing, asset management, information technology (IT) consulting and digital transformation.

Industry 4.0 52

Industry 4.0 Industry 4.0 Supply Chain Artificial Intelligence 52

Control Engineering

JANUARY 25, 2023

With 2023 now in full swing, the automation solutions segment is well positioned for another robust year in terms of M&A and capital placement activity. We will cover a range of topics, including business valuation, how to build your company’s value, the state of the M&A market and methodologies to “exit at the top” in a sale.

Automation 52

Automation Supply Chain Artificial Intelligence Robotics 52

Control Engineering

NOVEMBER 22, 2022

Hall, answered questions from Control Engineering and Plant Engineering (CFE Media and Technology) about these and other topics. Question: How important is it to develop long-term relationships with customers during projects and why? Building long-term relationships with our customers is essential to how we, at GTH, do business.

Supply Chain 52

Supply Chain Process control Pharmaceutical Automation 52

Control Engineering

APRIL 26, 2023

They discussed topics related to talent acquisition in the automation industry. However, it would take a significant recession to swing the pendulum from a candidate-driven market to an employer-driven one in the near term. S – Security; Likelihood of long-term employment or physical safety.

Automation 52

Automation Electronics Robotics Robotics 52

Frost & Sullivan Manufacturing

NOVEMBER 30, 2023

The UAE and KSA at the Forefront UAE and KSA are at the forefront of the Gulf Cooperation Council (GCC) area in terms of their ambitious smart port efforts. KSA’s Vision 2030 and Port Modernization: The topic of discussion is the relationship between Saudi Arabia’s Vision 2030 and the modernization of its ports.

Logistics 52

Logistics Artificial Intelligence Cargo Benchmarking 52

Control Engineering

SEPTEMBER 21, 2022

Topics included where are the managed or unmanaged switches to address cybersecurity, what’s on the network or not on the network, and what devices are discontinued or at the end of life. It’s a long-term vision, a lot of sponsorship and requires execution against that. How do we get empirical data?

Process control 52

Process control Enterprise Resource Planning (ERP) Function Beverage 52

Frost & Sullivan Manufacturing

OCTOBER 9, 2023

Some challenges for software developers in the automotive industry include stringent safety and cybersecurity requirements. Continuing the topic of partnerships, can you provide a few examples of LeddarTech partnerships and the impact that these partnerships are expected to make in the automotive ecosystem?

Automotive 59

Automotive Function Automation Fit 59

Control Engineering

FEBRUARY 15, 2023

The actual data gathering is governed by topics. An MQTT topic is a text string that identifies the data being published. Similarly, the SCADA system, MES, or data historian, as well as the PM application, could subscribe to the appropriate topic path to get status from a safety PLC, for staying on top of machine state.

Sourcing 98

Sourcing Manufacturing Execution System (MES) Automation Industry 4.0 98

Foley

JULY 11, 2023

Table of Contents Everything Electrified and Connected All at Once: New Challenges Facing Supply Chains, Best Practices and Lessons Learned Cybersecurity Threats in the Manufacturing Industry The New Era of U.S. Back to the Table of Contents Cybersecurity Threats in the Manufacturing Industry AUTHORS Aaron K.

Manufacturing 40

Manufacturing Compliance Supply Chain Form 40

Frost & Sullivan Manufacturing

APRIL 3, 2024

If you missed attending this event, here are some of the key points and observations from the 5-day conference: Key Takeaways Artificial intelligence (AI) and cybersecurity were the focal points of the event with generative AI (GenAI) use cases generating significant discussion.

Artificial Intelligence 52

Artificial Intelligence Logistics Electronics Sourcing 52

Frost & Sullivan Manufacturing

OCTOBER 18, 2024

The message was clear: disruptive tech like GenAI, cybersecurity, and 5G, along with new business models—think satellite partnerships, neutral network hosts, and open-source collaborations—will define the future of IoT and edge computing. It showcased how the industry is getting ready for a smarter, more connected, and automated future.

Artificial Intelligence 52

Artificial Intelligence Automation Automotive Sourcing 52