Fastener News Desk

NOVEMBER 9, 2023

Looking at the overall components of the FDI, three of the four (sales, employment, and supplier delivers) improved m/m, while customer inventories were unchanged. The seasonally adjusted October FDI (52.6) improved from last month (48.5) and returned to growth (>50) for the first time since February. last month to 54.7 in October).

Benchmarking 52

Benchmarking Sourcing Form Supply Chain 52

Foley

DECEMBER 19, 2022

5 These long-standing prohibitions were given additional life in the United States-Mexico-Canada (USMCA) Agreement Implementation Act, which ordered the establishment of the Forced Labor Enforcement Task Force to monitor the enforcement of Section 1307, which was established by Executive Order 13923 on May 15, 2020. 10 Laura Murphy et al.,

Supply Chain 69

Supply Chain Compliance Electronics Automotive 69

Control Engineering

SEPTEMBER 11, 2022

DCS suppliers refer to this as progressive compatibility. Most DCS suppliers and a number of systems integrators have developed comprehensive system migration strategies for competitors’ systems. Figure 2: This field survey checklist allows an end-user to develop the bidding requirements for prospective system suppliers.

Automation 59

Automation Function Artificial Intelligence Bottleneck 59

ATS

OCTOBER 10, 2022

To deliver high-quality products on time, every time, they use a vast and interconnected network of suppliers. If one of these suppliers is compromised, it’s possible for hackers to both disrupt the flow of materials and use insecure connections to move up the network into critical company systems.

Manufacturing 52

Manufacturing Industry 4.0 Industry 4.0 Artificial Intelligence 52

Fastener News Desk

JUNE 8, 2023

For additional information go to NFDA-Fastener.org North Coast Fastener Association The North Coast Fastener Association will host Cork-SCREW… Cheers to Fasteners event on June 22nd from 5:00-9:00PM. Join thousands of attendees from over 30 countries in the trade show capital of North America, Las Vegas, Nevada.

Supply Chain 52

Supply Chain Beverage Aerospace Automotive 52

Modern Machine Shop

MAY 28, 2023

In addition, the cooling bells are labeled with the corresponding tool diameters. Implementing such a system is said to supply machine shops with more efficiency because it forces programmers to use a specific set of tools that are equipped with a Zoller ID chip.

Industry 4.0 94

Industry 4.0 Industry 4.0 Smart manufacturing Fit 94

Foley

APRIL 11, 2023

Automakers and their suppliers have long been participants in unfair trade investigations before the International Trade Commission (“ITC”), but the scope and subject matter of automotive-related investigations is evolving. 337-TA-928.

Automation 75

Automation Automotive Electronics Supply Chain 75

MEM

JULY 20, 2023

IDS Imaging Development: The importance of space exploration is increasing, and more and more astronauts are cavorting in space. In addition, a complex apparatus, which is otherwise necessary for fluorescence microscopes, can be dispensed with and a lot of space can be saved. MPixel Dimensions: 36.0

Control Algorithm 40

Control Algorithm Artificial Intelligence Prototype  Manufacturing 40

i4.0 today

MAY 13, 2024

In addition, technical standards enable interoperability, making the solution simple to integrate with anything from national ID schemes to legacy technology. This will deliver joint customers unparalleled, industry-leading support, true crypto-agility and post-quantum computing (PQC) readiness.

Compliance 52

Compliance Electronics Function Industry 4.0 52

ATS

JULY 28, 2022

gathered from equipment sensors, used by suppliers and distributors and monitored for quality assurance and tracking — blockchain is a natural fit as a powerful data sharing, tracking and shielding solution for industrial companies. In addition, quality tracking can be effectively accomplished by entering outgoing piece data into the chain.

Manufacturing 52

Manufacturing Supply Chain Industry 4.0 Industry 4.0 52

Fabricating & Metal Work

MAY 26, 2023

Fixtureworks ® (Fraser, MI), a leading North American manufacturer and supplier of clamps, fixturing accessories, machine tool components and rollers & bumpers, now offers a lineup of pneumatic clamp fasteners. In the ID Holding variety, these holding clamps hold the internal diameter of prepared hole of a workpiece.

Manufacturing 52

Manufacturing 52

MEM

AUGUST 14, 2023

For Recycleye, choosing the right automation supplier and the right robotic solution was critical to their technology’s success. “In The FANUC LR Mate 200 iD/4SC is the perfect accompaniment to our vision system. Peter continues: “In addition, the FANUC LR-Mate is ultra-efficient, using five times less energy than a Delta robot.

Robotics 97

Robotics Robotics Automation Function 97

Fabricating & Metal Work

JULY 23, 2023

3D/Additive Manufacturing, Forming & Fabricating Fabricating & Metalworking is proud to present the FABTECH 2023 Product Showcase, which is an invaluable guide to navigating the trade show floor at McCormick Place in Chicago this September. An estimated 45,000 people will attend FABTECH 2023. The company will be in Booth B36071.

Additive manufacturing 98

Additive manufacturing Form Manufacturing Automation 98

Control Engineering

AUGUST 28, 2023

Advances expected to be shown and discussed at the event include: Festo CPX-AP-A distributed I/O for electric and pneumatic motion additions mean “no other supplier in N.A. On the other side there are suppliers for electric or pneumatic linear motion. compares to the breadth of Festo motion solutions and support.”

Automation 52

Automation Computer-Aided Design (CAD) Supply Chain Assembly Line 52

Gary Mintchell

SEPTEMBER 6, 2022

OPC UA over MQTT is the only accepted field-to-multi-cloud solution – the combination with PA-DIM plus 70+ additional information models is unique.” With OPC UA being a perfect match for vertical communication in addition to PROFINET’s powerful and rich feature set, your automation solution will be ready for Industry 4.0.”.

Automation 130

Automation Industry 4.0 Industry 4.0 Compliance 130

Fabricating & Metal Work

JANUARY 20, 2023

In addition, job shops of all sizes expect those solutions to be easy-to-use, intuitive systems. Industry suppliers continue to respond to those needs by developing the next iterations of cobots, robots, automated in-process inspection systems, digital transformation — the list goes on. AMADA AMERICA, INC.’s

Robotics 98

Robotics Robotics Automation Function 98

Fabricating & Metal Work

APRIL 4, 2024

Eric Hagopian and his team run a first-rate operation that manufactures indexable broaching systems offering unique capabilities for ID/OD machining and simultaneous deburring of splines, slots, keyways, squares, hexagons and custom shapes.” Tool changes occur outside of the work area, which eliminates chip interference during tool changes.

Robotics 40

Robotics Robotics Automation Electronics 40

Frost & Sullivan Manufacturing

JANUARY 11, 2023

In addition to improving the overall experience of Mercedes-Benz EV owners, the chargers will also be available for use to compatible competing EV brands. The concept of digital paint with color changing capabilities, like that of Volkswagen’s ID.7 Volkswagen unveiled an all-electric, mid-size, long-range sedan – the new ID.7.

Automotive 52

Automotive Electronics Prototype  Manufacturing 52

Fabricating & Metal Work

DECEMBER 20, 2022

Connecting to multiple suppliers’ tool databases, CoroPlus Tool Supply can store correct tool information, including ISO parameters, bill of material, spare parts, product images and computer aided design (CAD) file types, in a single area. ID tool holder locations. Stor-Loc’s new HSK-125A Tool Caddy. The bottom pan is 2.5″

Computer-Aided Design (CAD) 52

Computer-Aided Design (CAD) Bill of Materials Logistics Sourcing 52

i4.0 today

AUGUST 15, 2023

For Recycleye, choosing the right automation supplier and the right robotic solution was critical to their technology’s success. “In The FANUC LR Mate 200 iD/4SC is the perfect accompaniment to our vision system. Peter continues: “In addition, the FANUC LR-Mate is ultra-efficient, using five times less energy than a Delta robot.

Robotics 52

Robotics Robotics Automation Function 52

Foley

JULY 11, 2023

New technologies and new customers present a growing demand for new products or components and require supplier capacity to manufacture those products or components for the market. For example, a supplier may make significant investments in production capacity for a customer bringing a new product to market.

Manufacturing 40

Manufacturing Compliance Supply Chain Form 40

Fabricating & Metal Work

MARCH 17, 2023

Siemens (Chicago, IL) has entered a new collaboration with Xerox® Elem Additive Solutions, aimed at strengthening the metal additive manufacturing (AM) capabilities of both businesses. Siemens has purchased an ElemX metal 3D Printer, adding to its fleet of additive machines inside the company’s Charlotte (N.C.)

3D printing 52

3D printing Automation Form Cycle time 52

Fabricating & Metal Work

OCTOBER 2, 2022

Don’t miss the chance to be inspired by industry experts, suppliers and your peers in the metal forming, fabricating, welding and finishing sectors at FABTECH 2022. The following pages outline products and demonstrations expected to be on display by world-class suppliers in four halls. www.behringersaws.com. Equipped with a 7.5

Automation 52

Automation Form Robotics Robotics 52