Omron

OCTOBER 7, 2023

An Ideal Indicator for OK/NG Judgements in Automated and Picking Machines, Measuring Factors such as Pressure, Load, Torque, and Weight Using Load Cell Signal Input.(K3HB-V)

Automation 52

Automation 52

Fabricating & Metal Work

MARCH 8, 2024

The Mentor Pro features a molybdenum shielded hot zone measuring 18” wide x 18” high x 36” deep, capable of operating temperatures up to 2400°F, and a workload weight capacity of up to 1,000 lbs and includes the SolarVac® Essentials PLC-based control system.

Manufacturing 59

Manufacturing Automotive 59

Canadian Manufacturing

APRIL 25, 2024

million tonnes of plastic waste ends up in Canadian landfills every year – equivalent to the weight of 24 CN towers. With approximately one-third of landfill space occupied by packaging waste, there is a critical need for proactive measures to reduce waste production. “As

Supply Chain 52

Supply Chain Manufacturing Advanced manufacturing 52

E&T

MARCH 15, 2023

A-weighted decibel (dBA or dB(A)) is an expression of the relative loudness of sounds as perceived by the human ear. A-weighting gives more value to frequencies in the mid-range of human hearing and less value to frequencies at the edges as compared to a flat audio decibel measurement.

Sourcing 105

Sourcing 105

Fabricating & Metal Work

NOVEMBER 16, 2023

a global manufacturer of precision measurement equipment used for dimensional metrology, recently announced the new MarCal 18 EWR(i) digital caliper. This allows for seamless transmission of measurement data directly to a computer, eliminating the need for bulky data cables. Mahr Inc. , for unmatched industry expertise. Mahr Inc.,

Fit 52

Fit Form Manufacturing 52

Fabricating & Metal Work

SEPTEMBER 28, 2023

Net Weight 66 Overall Dimensions (LxWxH) 39.370″ L x 17.323″ W x 25.590 – 37.402″ H Model Number MRS4 Master Case Pack Qty 1 Master Pack Height (in) 37.4 Master Pack Weight (lbs) 5.97 Master Pack Weight (lbs) 5.97 Master Pack Length (in) 5.63 Master Pack Width (in) 5.38 Master Pack Length (in) 5.63

Fit 52

Fit Manufacturing 52

E&T

FEBRUARY 1, 2023

Where this Renpho scale applies its smarts is with four precision sensors that use bioelectrical impedance analysis (BIA) technology to measure the components of the body as you stand on the silver sensing plates. Your weight - the most commonly desired metric - is displayed directly on the scale's 2.4 inch LED display.

Fit 59

Fit Form Function 59

Robotics Business Review

APRIL 25, 2024

Sanctuary said it further miniaturized hydraulics, resulting in reduced weight, power consumption, and complexity, with increased hardware and software measures that exceed specified safety standards. The company has increased range of motion in the wrists, hands, and elbows. It has also increased hand durability.

Robotics 110

Robotics Robotics Bill of Materials Automotive 110

E&T

OCTOBER 24, 2023

It measures 6.4m (21 ft) corner to corner and weighs 24.5kg – half a kilogram less than the weight limit set by the Civil Aviation Authority. The drone was named the Giant Foamboard Quadcopter (GFQ) GFQ is made from foamboard, a cardboard-like material.

Aerospace 97

Aerospace 97

Manufacturer's Monthly

OCTOBER 2, 2023

The research conducted by the last PhD student, Dr Esmaeil Pournamazian Najafabadi, addressed the challenges with heavy conventional props, that are mainly made from mild steel with low capacity-to-weight ratios.

Benchmarking 98

Benchmarking Automotive Manufacturing 98

Fabricating & Metal Work

APRIL 29, 2024

For interactive graphical assistance on all operations, including measurement and machining cycles, the FORM P 350 includes the user-friendly AC FORM HMI (human machine interface) based on a standard Windows® 10 platform.

Form 52

Form Process control Aerospace Electronics 52

E&T

OCTOBER 11, 2022

An epistemological debate emerged about how we could measure nature, and hence comprehend it. There were many questions that needed answering – such as how to measure previously unmeasured quantities like heat – but perhaps the most important was the question of standardisation.

Consumer Goods 81

Consumer Goods 81

Modern Machine Shop

MAY 25, 2023

There are many ways to measure a bore, and many factors that influence the accuracy of hole diameter measurements. This may make even technically accurate measurements inaccurate from a part-function perspective, so it is important to consider the effects of gage centralization for smaller bores.

Function 98

Function Manufacturing 98

SMMT

NOVEMBER 4, 2022

Registrations of large and mid-weight vans fall -7.6% tonnes declined -7.6%, while registrations of mid-weight vehicles weighing up to 2.5 Demand for zero emission vans remains robust despite these challenges, but a successful net zero transition will require measures targeted at long-term operator confidence. of the market.

Manufacturing 90

Manufacturing 90

Manufacturing Tomorrow

JANUARY 26, 2023

CubiQ freight measurement solutions with integrated Blickfeld Cube 1 LiDAR sensors are offered under the name CubiQ-X, delivering dimensional weight (DIM) in less than two seconds and providing up to 99 percent accuracy.

Freight 40

Freight Logistics Robotics Robotics 40

E&T

APRIL 26, 2023

The EU predicts its measure will reduce aircraft CO2 emissions by around two-thirds by 2050 compared to a ‘no action’ scenario, and provide climate and air quality benefits by reducing non-CO2 emissions. These kinds of measures help make Europe a front-runner in the production of innovative clean fuels, globally.

Prototype  105

Prototype  Fit 105

E&T

JANUARY 9, 2023

The findings, published in the journal Review of European, Comparative & International Environmental Law , identified several challenges including the limited scope and weight of regulation, and a lack of competence among inspectors.

Pharmaceutical 105

Pharmaceutical Supply Chain Manufacturing 105

Robotics Business Review

DECEMBER 26, 2023

The programming of the leg is based on biomechanical measurements of people with two biological legs, to replicate the motion that the hips and back evolved for. Users of passive prosthetic legs often experience pain in the hips, back, and organic knee due to the way they need to compensate for the dead weight of the prosthetic leg.

Robotics 86

Robotics Robotics Control Algorithm 86

Mold Making Technology

JANUARY 1, 2024

The spindle rotates the tool with a variably adjustable speed of 400-1,200 rpm, depending on its weight. The »toolBalancer« also includes intuitive software that guides the operator through the steps of measuring and correcting imbalance until the tool is balanced within the desired tolerance.

52

52

Fastener News Desk

FEBRUARY 26, 2024

The total weight was decisive for the satellite’s properties, says Rasmus Pedersen, director and CCO of the Industry Division at Hans Buch. – It was essential for the design of the satellite that the weight could be kept down without compromising on quality, and here our PEM® press fasteners played a crucial role, he explains.

Electronics 64

Electronics Automotive Form Sourcing 64

Gary Mintchell

NOVEMBER 21, 2023

While these facilities can efficiently process large volumes of discarded plastic, the transport of these materials from remote locations is cost prohibitive and a source of CO2 emissions due to their low specific gravity and poor transportation efficiency per unit weight. This saves energy and is suitable for use on a small scale.

Function 130

Function Sourcing Supply Chain Prototype  130

i4.0 today

AUGUST 17, 2023

The team uses ultramodern fuel cell systems and state-of-the-art type IV pressurized tanks to develop the “Mercurius” prototype – the world’s longest-range UAV with less than a 25 kg take-off weight that outperforms any commercially available drone. Minimal refueling and lower overall costs are other factors here.

Electronics 52

Electronics Aerospace Prototype  Function 52

E&T

APRIL 19, 2023

The new measures are due to recent drought conditions, the canal authority said, prompting the fifth adjustment of its kind since the start of the year. Officials did not provide an end date to the measure, described for now as temporary, but said they hope it can "be lifted as soon as possible" once the Central American rainy season starts.

Cargo 98

Cargo Logistics 98

Automation Mag

APRIL 13, 2023

With this expansion into test and measurement, Emerson will enhance its automation capabilities and gain a broader set of customers that relies on NI’s solutions at critical points along the product development cycle. Emerson currently owns approximately 2.3 As a result, Emerson’s effective per share purchase price is $59.61.

Automation 92

Automation Aerospace Electronics 92

MEM

SEPTEMBER 7, 2023

This in turn means a shallower head is required which enables manufacturers to save weight per fastener – leading to significant efficiency gains in aerospace, automotive and other high-end industries.

Form 52

Form Manufacturing Logistics Aerospace 52

i4.0 today

MARCH 14, 2024

Having the option to rapidly switch between five screw sizes (14, 18, 22, 25 and 40mm) ensures that the optimum screw size is selected to suit each application’s shot weight. Between these three machines we can essentially mould components of any shot weight, using any tool, from the widest variety of medical-grade polymers,” extols Ian.

Fit 52

Fit Sourcing Manufacturing 52

AU Manufacturing

APRIL 25, 2023

The technology could also be used to measure the health status of athletes and people working in hazardous environments. Stretchable strain sensors were recently developed to mimic skin perception by measuring pressure, tension, and weight.

Artificial Intelligence 52

Artificial Intelligence Function Electronics Robotics 52

MEM

DECEMBER 20, 2022

The weight of a million mince pies. To better understand when this can happen and how to prevent it, the elves can install inclinometer and load sensors onto the sleigh to measure the incline, camber and payload at different angles. . This would determine the weight distribution in the sleigh. Santa’s trip isn’t easy.

Aerospace 52

Aerospace Manufacturing 52

Fabricating & Metal Work

SEPTEMBER 20, 2023

As an additional safety measure, green, yellow and red lights are mounted on the boom to indicate different alert conditions. The HT60KX is one of Venturo’s strongest cranes, with a high weight capacity and full-hydraulic operation to lengthen its duty cycle. The VLC system is a game-changer for operators,” Lahmer said. “It

Electronics 52

Electronics Manufacturing 52

Modern Machine Shop

AUGUST 31, 2023

As a measure of what a machine tool or cutting tool is capable of, metal removal rate is as meaningful as ever. But as the measure of the success of a process that puts the machine, tool, toolpath and other elements together — here is where things have changed. This, too, leads to more measured cutting.

Additive manufacturing 98

Additive manufacturing Process control Automation Form 98

Mold Making Technology

NOVEMBER 30, 2022

This also meant that the compensation couldn’t take into account the workpiece and fixture weight, as well as any thermal drift seen by the machine. To overcome this, Grob updated the compensation points by measuring a tooling ball permanently mounted in the machine.

52

52

SMMT

AUGUST 24, 2023

tonne van has claimed the official Guinness World Records title for the ‘heaviest weight towed by an electric van’. The truck’s trailer was laden with a huge Collard Group earth-mover weighing in excess of 50 tonnes, with an additional seven tonnes of ballast being added for good measure. Tell us more?

Cargo 52

Cargo Fit 52

Automation Mag

NOVEMBER 24, 2022

Over the last four years, the CoT has launched several measures to enhance cybersecurity. These include the “Security by Default” principle, which takes cybersecurity into account right from the design phase and provides products with preconfigured security measures.

Supply Chain 52

Supply Chain 52

i4.0 today

JANUARY 3, 2024

Two DUO machines were shipped yesterday and a third today, together with measuring equipment. It is rewarding to come nearer the completion of the Italian factory that will soon mass produce light-weight solar panels for the European market,” comments Midsummer’s CEO Sven Lindström. The two trucks will arrive in Bari in January.

Automation 52

Automation Manufacturing Industry 4.0 Industry 4.0 52

MEM

SEPTEMBER 20, 2023

The company has invested in new machinery, including a Hexagon Absolute Arm for quality control measures and a further HURCO CNC for greater machining capacity.

Composites 52

Composites Aerospace Automotive Manufacturing 52

Manufacturer's Monthly

APRIL 25, 2023

As well as uses in healthcare settings, E-skins could be used to measure the health status of athletes and people working in hazardous environments. Recently, stretchable strain sensors have been developed to mimic human skin perception by measuring pressure, tension and weight.

Function 97

Function Artificial Intelligence Electronics Robotics 97

E&T

JUNE 28, 2023

The baseplate is 100 per cent aerospace-grade carbon fibre, with flexibility customised based on age, gender, body weight and sport. But how much of a difference can that make to moving the weight of a person? We’re told that verticals in basketball are always measured in inches, thanks to the American dominance of the game.)

Made-to-spec 98

Made-to-spec Fit Composites Aerospace 98