AU Manufacturing

FEBRUARY 28, 2023

The RV manufacturer introduced Off Grid-X upgrade by featuring an additional spec option with its new Intelli-Jay High Power management system, 400AH lithium battery, 3x 200W solar panels with 40AH solar controller, 180 AMP charging and a 3000W inverter.

Made-to-spec 83

Made-to-spec Manufacturing 83

Fabricating & Metal Work

APRIL 22, 2025

Traditionally, manufacturers rely on measurement and compensation to control these variations, adjusting for thermal and mechanical changes during grinding. But what if there was a way to eliminate a major source of inaccuracy altogether? MTC does exactly that. Thread cresting is one of the most important tap features to get right.

Made-to-spec 52

Made-to-spec Cycle time Form Aerospace 52

Mold Making Technology

DECEMBER 15, 2022

Oerlikon HRSflow developed and produced a hot runner system configuration to meet this challenge for a mold builder who pledged to come up with a solution made of biodegradable PLA that was both eco-friendly and attractive. Problem: Strict part design and sustainability requirements cause delivery delays and non-compliance with molded parts.

Cycle time 97

Cycle time Made-to-spec Compliance Function 97

SMMT

AUGUST 1, 2024

The new express coaches came via Yutong UK franchised dealer Pelican Engineering in full FlixBus spec. Its fleet is made up of 16 minibuses and ten coaches – including the new additions – supported by a staff of 26. The GT12s have (DAF) MX-11 450hp engines, ZF axles and air-suspension, and are shod with Michelin 295/80 R22.5

Made-to-spec 59

Made-to-spec 59

Modern Machine Shop

DECEMBER 8, 2022

Part of the reason this expansion made sense for Imperial was its machining expertise. Should machine shops adopt AM? My answer to this question has shifted. About five years ago, I posted an article with the title, “ Additive Manufacturing Belongs in a Machine Shop.” These machine tools can then be set free for higher-value work.

Additive manufacturing 98

Additive manufacturing 3D printing Made-to-spec Manufacturing 98

Robotics Business Review

JANUARY 20, 2024

Robotics competition teams can use the Kria KR260 Robotics Starter Kit. Source: AMD From students and startups to the world of entertainment, interest in robots is everywhere these days. Automation demands synchronization above all else. Synchronization is the result of determinism in communications and action.

Robotics 130

Robotics Robotics Made-to-spec Bill of Materials 130

Gary Mintchell

APRIL 26, 2024

He made sure every single SSR we built was tested—twice—to make sure it would function to specs once you installed it in the field. I first met Opto 22 back in the early 90s when I searched for a solution to connect one of my Allen-Bradley devices to a Modicon PLC and discovered their solid state relays. Note: I didn’t get the job.)

Made-to-spec 130

Made-to-spec Automation Electronics Manufacturing 130

Modern Machine Shop

OCTOBER 1, 2024

The MA-4000H is designed for heavy, high-performance metal machining for both mass production and variable-volume production runs, made possible by its range of available spindle options. Key specs of the MA-4000H include: Max machining travels: 22.05" × 25.59" × 26.97" Rotary pallet size: 15.7"

Made-to-spec 52

Made-to-spec Function Sourcing 52

Modern Machine Shop

NOVEMBER 19, 2023

To make it even more complicated, each of these manufacturers have very different recommended torque specs, even for the same sizes. Photo Credit: Way of the Mill LLC Reader Question: As our shop has grown, either due to cost or availability, our toolholders are in disarray.

Made-to-spec 111

Made-to-spec Fit Manufacturing 111

Modern Machine Shop

MARCH 18, 2025

The separated bins also enhance quality control and optimize inspection — if the parts in bin 1 and bin 12 are within spec, there is less need to inspect the parts in bins 2-11. In addition, the bins are made from a polymer that helps protect finished components from damage.

Made-to-spec 52

Made-to-spec Sourcing 52

Modern Machine Shop

JANUARY 7, 2024

This labor-intensive process made unattended operations impossible, which in turn meant that a single roll took three workdays to produce on a one-shift, eight-hour schedule. Even then, the manual operations made high-quality surface finishes and other specs more difficult to attain with high repeatability.

Made-to-spec 98

Made-to-spec Manufacturing Automation 98

Modern Machine Shop

JUNE 7, 2023

The RF/RX ram-type machines are also available in 3+2 or five-axis, high-spec configurations for part sizes up to 650 mm in diameter. The CF/CX Series C-frame machines offer either 3+2 or five-axis, high-performance machining of parts up to 400 mm in diameter.

Made-to-spec 52

Made-to-spec 52

E&T

JUNE 28, 2023

Athletes and sportspeople, both amateur and professional, will do a lot to boost their performance. You can spend many hours training to shave off milliseconds or add millimetres. And while you can’t buy elite performance. 200 is not much if it truly gives you an edge. The top is also customised (3, 5 or 7mm thick) to suit the sport and shoe type.

Made-to-spec 98

Made-to-spec Fit Composites Aerospace 98

Fabricating & Metal Work

OCTOBER 14, 2023

In this “marriage” arrangement, the cutting parameters are captured, fed to a cloud-based or host server, instantly compared to the CAD specs and then, as needed, the machine is adjusting its cutting of the very next parts. Thus, data capture and instant adjustments in the cutting and finishing operations are made possible.

Made-to-spec 52

Made-to-spec Aerospace Manufacturing 52

Modern Machine Shop

MAY 13, 2025

In fact, in many cases Marle Tangible finds that its prices are similar or even lower than conventional implants made via machining. At Marle Tangible, today’s implants are made on the same Concept Laser (now-GE/ Colibrium Additive ) LPBF platform that the company started with, and titanium powder is still the material of choice.

3D printing 94

3D printing Automation Manufacturing Additive manufacturing 94

Mold Making Technology

JANUARY 22, 2025

Thermoplastic washers can be made out of many different types of material. This is Part 2 in a series. Click here to read Part 1 Let’s start off by clarifying two frequently misused names given to shoulder bolts. In addition to limiting travel, range bolts also serve as a safety feature. Typical range bolt.

Made-to-spec 59

Made-to-spec Function Fit Automotive 59

Control Engineering

MAY 6, 2023

They also prebuilt the SCADA/DAS and PLC closet and made it compliant to NEI08-09 add the twisted pair of wires for the current loop, use existing wiring and lamps for annunciators. Many analog control rooms can be upgraded by replacing the digital meters for better data transmission and flow.

Made-to-spec 59

Made-to-spec Compliance Automation Manufacturing 59

Additive Manufacturing

NOVEMBER 9, 2022

Gartner’s Hype Cycle has made us all students of overblown trends and what they mean en route to new manufacturing realities. No, not that one quite yet, whatever retail establishments want you to think. The trick about 3D printing, as we’ve learned over the years, is to look at announcements with a critical eye. World’s first Is it?

Additive manufacturing 105

Additive manufacturing 3D printing Manufacturing Made-to-spec 105

Mold Making Technology

JUNE 15, 2023

The RF/RX ram-type machines are also available in 3+2 or five-axis high-spec configurations for part sizes up to 650 mm in diameter. The CF/CX Series C-frame machines offer either 3+2 or five-axis high-performance machining of parts up to 400 mm in diameter. The RX65, for example, is pointed to in particular for moldmaking applications.

Made-to-spec 52

Made-to-spec 52

Manufacturer's Monthly

NOVEMBER 27, 2022

We found a new place where we could build the factory from the ground up and build it to spec, designing it exactly how we wanted from the beginning to end. Sleep Corp. David Kaplan, managing director and CEO. SleepCorp’s Virtual Manufacturing System (VMS) uses robotics-based machinery for increased efficiency in manufacturing.

Manufacturing 105

Manufacturing Made-to-spec Robotics Robotics 105

Marshall Wolf Automation

NOVEMBER 8, 2023

They were able to discuss a Pepperl+Fuchs option, exchanged cards and we were moving along! Image by Freezin’ Good I was particularly excited to see the Novus N1200-HC that we were able to spec in for a customer. The sense of urgency made a lot more sense.

Made-to-spec 59

Made-to-spec Manufacturing Lead Time Automation 59

Control Engineering

NOVEMBER 6, 2023

Learning Objectives Understand where (types of applications) PLC-based programming can be effective. Learn best practices related to code structuring, decomposition, reuse, encapsulation and abstraction. Observe benefits of standard libraries for logic, motion, safety and communication. Fortunately, platform A has extended math functions.

Made-to-spec 52

Made-to-spec Function Artificial Intelligence Automation 52

E&T

APRIL 6, 2023

Huge progress in equality and representation has been made across many societies in the last 20 years, yet the fact remains that feeling comfortable at work is still a challenge for many. In practical terms, this means that job specs/adverts should be gender decoded and use soft language to attract a wider and more diverse candidate slate.

Made-to-spec 69

Made-to-spec Fit 69

Modern Machine Shop

MARCH 12, 2024

We’ve produced 30 million parts over 10 years, and when those part specifications are uploaded to Fictiv, we do a computational geometry analysis that simulates how this part will be made in the real world. Dave Evans : Materials.AI really developed from our customers. Evans : Sure. It's still the reference manual, right?

Manufacturing 85

Manufacturing Made-to-spec Artificial Intelligence Sourcing 85

Fabricating & Metal Work

FEBRUARY 9, 2024

The new One Off Robotics Cell powered by Meltio, and made in the USA, uses standard welding wire and produces parts that are consistent, spatter-free and clean. The new One Off Robotics Cell powered by Meltio, and made in the USA, uses standard welding wire and produces parts that are consistent, spatter-free and clean.

Additive manufacturing 52

Additive manufacturing 3D printing Robotics Robotics 52

DSIMN

AUGUST 4, 2021

A drawing may look good structurally but when manufactured to the drawing’s specs, tolerances, bend allowances and welds may be off, thickness of steel may be too thin, holes may be drilled in the wrong position and a host of other problems may exist. Most often this is not the case. It is easy when everything works.

Made-to-spec 52

Made-to-spec Prototype  Manufacturing 52

Modern Machine Shop

MARCH 23, 2025

At every stage, expert machinists and engineers check and re-check their work to ensure every part is in spec. The Harmoni terminals are present at every machine tool on MSI's shop floor, providing workers with easy access to the system and avoiding the need to trudge across the shop to input data. When Machine Specialties, Inc., (MSI)

Made-to-spec 81

Made-to-spec Consumer Goods Aerospace Digital manufacturing 81

Mold Making Technology

MARCH 19, 2023

made fiber laser welding and engraving systems built specifically for mold builders and toolrooms. Stephens Convention Center in Rosemont, Illinois, brings partners across the supply chain together, bringing energy and excitement to the show floor. For all things mold maintenance, repair and surface treatment, check out the profiles below.

Made-to-spec 98

Made-to-spec 3D printing Bottleneck Supply Chain 98

E&T

SEPTEMBER 15, 2022

It is made at TSMC on a 5nm process. I don’t know if I trust a fanless, heatspreader-less, non-upgradable laptop – especially at this base model spec. Apple released the first general-user MacBook Air laptop based on its M2 processor in July with UK retail prices starting at £1,249. No more perforated top case,” notes Goldheart.

Made-to-spec 73

Made-to-spec Benchmarking Fit 73

AU Manufacturing

MAY 31, 2023

“Reusing waste and low-quality materials has the potential to add economic value and reduce the high carbon footprint of the titanium industry,” said Qian from RMIT’s Centre for Additive Manufacturing in the School of Engineering.

3D printing 52

3D printing Made-to-spec Aerospace Additive manufacturing 52

Fabricating & Metal Work

SEPTEMBER 30, 2024

Taps made from advanced materials such as high-speed steel with cobalt (HSS-E), powdered metal, or carbide, can significantly extend tool life and improve process reliability. Consistently producing on-spec parts each time virtually eliminated rejected parts, improving quality, and driving down costs.

Made-to-spec 52

Made-to-spec Form Manufacturing Process manufacturing 52

i4.0 today

FEBRUARY 16, 2023

Made to accommodate smaller food factory layouts, including tightly packed production facilities, low ceiling heights and for insertion between product chutes and hoppers, this Mini Gravity Metal Detector is also packed full of useful labour and time saving features. Resulting in less product rework and consequently waste.

Made-to-spec 52

Made-to-spec Logistics Function Beverage 52

Modern Machine Shop

SEPTEMBER 24, 2024

Beryllium stock is about 10 times as expensive as aluminum, McKay says. To avoid scrap, the company makes test parts out of aluminum to prove out machining processes and programs before embarking on a beryllium version. Today, the shop primarily works on aerospace and defense parts, especially satellite structures and components.

Revision control 105

Revision control Made-to-spec Process control Automation 105

Manufacturer's Monthly

MAY 29, 2023

Markforged ’s serial-producing printer – the PX100 Binder Jetting solution – enables manufacturers to build large quantities of high-quality metal parts. When Christian Lönne joined the company in 2019, it had grown from its startup roots using completely new technology to having a presence in a number of industries.

3D printing 98

3D printing Additive manufacturing Made-to-spec Prototype  98

MEM

AUGUST 4, 2023

Vision Research, manufacturer of Phantom high-speed cameras, has made a major update to its published product specifications. Toni Lucatorto, Senior Product Manager at Vision Research adds, “We are excited to implement this new set of image specs, as it is clearly a superior way to specify image quality and sensitivity. billion.

Made-to-spec 52

Made-to-spec Automotive Manufacturing 52

Fabricating & Metal Work

MAY 17, 2024

A leading additive manufacturing technology company for mission-critical metal parts, has announced the release of Developer , a new offering made available in the company’s Flow print preparation software that unlocks full transparency and control of the parameters used in the 3D printing process. Image courtesy of Velo3D.

3D printing 52

3D printing Made-to-spec Additive manufacturing Manufacturing 52

Mold Making Technology

APRIL 2, 2023

The cavity plate of a 60 × 89-inch aluminum production tool for low-pressure/structural foam molding is being milled on the Fooke Endura 704Linear. CDM estimates it could rough and semi-finish/finish the large tool two to three times faster on the Fooke than on any other equipment in its shop. Photo Credit: CDM Tool & Mfg.

Made-to-spec 98

Made-to-spec Fit Composites Prototype  98