Robotics Business Review

MAY 21, 2024

The Auto DeltaWeld System is a MIG/Flux-cored, pulsed-capable power source designed for collaborative robots , according to Miller Electric Mfg. based company said its system is intended for customers that want the benefits of automated welding without the cost and complexity of traditional power supplies. The Appleton, Wis.-based

Robotics 117

Robotics Robotics Sourcing Function 117

i4.0 today

DECEMBER 16, 2024

As part of the MoU, Infineon will supply a complete chipset, including microcontroller units, balancing and monitoring ICs, power management ICs, drivers, MOSFETs, controller area networks and sensor products. About Infineon Infineon Technologies AG is a global semiconductor leader in power systems and IoT.

Automotive 52

Automotive Industry 4.0 Industry 4.0 Manufacturing 52

Robotics Business Review

OCTOBER 7, 2024

“Our new service will identify ways to achieve these objectives by optimizing robot energy efficiency, including fine-tuning performance and using the latest robot technologies,” he said. The company said its goal is to provide an easy way to assess and optimize robot power efficiency. Click here to enlarge. Click here to enlarge.

Robotics 116

Robotics Robotics Manufacturing Benchmarking 116

Robotics Business Review

JANUARY 10, 2024

” Kodiak said the latest edition of its autonomous semi-trucks has all the necessary redundant safety-critical hardware. Redundancy is the key to safety, says Kodiak Kodiak noted that its latest autonomous semi-truck includes redundancy across all safety-critical functions.

Robotics 119

Robotics Robotics Sourcing Automotive 119

i4.0 today

APRIL 16, 2025

“The IDS cameras integrated into the test cells capture high-resolution images of the surface of aluminium components from German OEMs, in this case an electric motor,” says Uwe Siegwart, Managing Director at Vivaldi, explaining the camera’s task. Several cam controllers are networked with the edge server.

Automotive 59

Automotive Manufacturing Industry 4.0 Industry 4.0 59

Canadian Manufacturing

AUGUST 13, 2024

The following project consortia represent the latest cohort of NGen’s Advanced Manufacturing programs: Commercialization of Quantum Technologies Stream (National Quantum Strategy) $5.6M NGen’s investment of $21.4M in these projects leveraged a total of $37.4M in industry contributions from 15 project consortia. NGen Investment | $8.5M

Advanced manufacturing 142

Advanced manufacturing Value chain Electronics Automation 142

E&T

JANUARY 17, 2023

The UK government has presented a new plan to boost smart electric vehicle (EV) charging, which it claims could save drivers up to £1,000 a year. . To do that we need to build new network infrastructure at pace, using the latest available technologies.

Energy Solutions 110

Energy Solutions 110

Robotics Business Review

FEBRUARY 23, 2025

The past 12 months have seen an explosion of interest in robots, especially humanoids , driven by an increase in computing power — thanks in large part to NVIDIA — and the physical AI innovation it has unlocked. However, the progression from humanoid pilots to full deployment follows a careful, methodical path that ensures safety.

Robotics 124

Robotics Robotics Artificial Intelligence Form 124

Fabricating & Metal Work

NOVEMBER 16, 2024

Cobot Welder now Supports Miller’s Auto DeltaWeld Hirebotics Beacon-powered Cobot Welder with Miller Auto DeltaWeld. The Miller Auto DeltaWeld System is a MIG/flux-cored, pulsed-capable power source designed for cobots. Beacon, a Hirebotics smartphone app, now controls the entire cobot welding setup.

Robotics 52

Robotics Robotics Automation Sourcing 52

Robotics Business Review

APRIL 8, 2025

Application of the Year: Tokyo Electric Power Company (TEPCO) used a remote-controlled robot named Telesco to retrieve a small piece of radioactive fuel from Japans Fukushima Daiichi nuclear plant. Attendees can gain insights into the latest enabling technologies, engineering best practices, emerging trends, and more.

Robotics 65

Robotics Robotics Logistics 65

E&T

JANUARY 5, 2023

The technology and car giant’s joint venture is called Afeela, with a prototype electric car appearing on-stage at Sony’s press conference ahead of CES 2023 in Las Vegas, which opens today (Thursday). Mizuno said Afeela hoped to begin sales of the car in 2025, with those first vehicles delivered to North America by spring 2026.

Prototype  117

Prototype  Supply Chain Automotive Manufacturing 117

Fabricating & Metal Work

MAY 1, 2025

Targeting the semiconductor, aerospace, medical, space launch, electric vehicle (EV), defense and other high-tech industries, Mazak will welcome manufacturers from the West Coast to the DISCOVER MORE WITH MAZAK event in Fremont California.

Cycle time 52

Cycle time Aerospace Electronics Function 52

Fabricating & Metal Work

DECEMBER 20, 2022

Beckwood Press Company, a leading manufacturer of hydraulic and servo presses, hydroforming machines, automation systems, and precision forming equipment is now offering all-electric linear servo actuators on any hot forming or superplastic forming press up to 500 tons. Subscribe to learn the latest in manufacturing. beckwoodpress.com.

Form 98

Form Automation Manufacturing 98

Manufacturer's Monthly

DECEMBER 14, 2022

exploring the latest innovations in power management and how they can be used in a range of applications. Today’s original equipment manufacturers face a complicated challenge when it comes to power management: An effective design must deliver stable performance while maintaining low power emissions and affordability.

Electronics 97

Electronics Manufacturing 97

Robotics Business Review

APRIL 30, 2025

During this presentation, Saunders will discuss the new, electric Atlas humanoid and share insights from being at the forefront of humanoid development for years. ” He will discuss his recent transition to Symbotic , which is delivering advanced AI-powered logistics robot fleets to the global supply chain. At 10:00 a.m.,

Robotics 59

Robotics Robotics Logistics Automation 59

E&T

AUGUST 17, 2023

The non-profit’s latest report has criticised the rules surrounding the financing of offshore wind farm projects, claiming the government could cause taxpayers to miss out of savings of more than £1.5bn a year from cheaper renewable energy. What is going on?" said Jess Ralston, an energy analyst at the ECIU.

Supply Chain 98

Supply Chain 98

Frost & Sullivan Manufacturing

APRIL 21, 2025

At Frost & Sullivan, weve identified a powerful shift among industry leaders: those who are effectively integrating automotive data analytics into their strategies are quickly pulling ahead. According to Frost & Sullivans latest analysis , the global automotive data monetization market is projected to grow from 1.72

Automotive 52

Automotive Manufacturing 52

Robotics Business Review

AUGUST 10, 2024

Latest cobot product announcements 1. Schneider Electric Lexium The Lexium collaborative robot line debuted in March. Source: Schneider Electric Unveiled at MODEX 2024, the two new Lexium cobots offer payloads of 3 to 18 kg (6.6 Register now and save. with positioning accuracy of +/- 0.02 mm (+/- 0.00079 in.) mm (+/- 0.00079 in.)

Robotics 110

Robotics Robotics Sourcing Automation 110

Manufacturer's Monthly

JULY 31, 2022

LIBERTY Ostrava has signed a contract with Danieli, a global manufacturer of plant and machinery, for the delivery of two hybrid electric arc furnaces at the centre of Ostrava’s GREENSTEEL transformation plan. . The new furnaces, the first of their kind in Europe, will have a combined capacity of 3.5

Electronics 97

Electronics Automation Manufacturing 97

Robotics Business Review

MARCH 28, 2024

— Artificial intelligence and robotics both devour power, but simulation, next-generation processors, and good product design can mitigate the draw. Delta designs simulation to manage automation Founded in 1971, Delta Electronics said it is a global leader in switching power supplies and thermal management products.

Electronics 122

Electronics Robotics Robotics Artificial Intelligence 122

E&T

MARCH 15, 2023

One of the largest exhibitions of its kind in the world, over 1,700 exhibitors showcase their latest designs to the trade and well-​heeled clients. A 100km journey that would cost €250 in fuel in a conventional internal combustion engine-powered 28ft boat, becomes almost free, costing around €20to charge the battery.

Prototype  105

Prototype  Fit Automotive Sourcing 105

Manufacturer's Monthly

AUGUST 15, 2023

DigiKey has released the first episode in Season 3 of its “Factory Tomorrow” video series focused on the latest innovations driving sustainable change in industrial automation. It’s exciting to see the changes that have been implemented in our Lexington, Ky.,

Automation 98

Automation Sourcing Manufacturing Robotics 98

Fabricating & Metal Work

NOVEMBER 16, 2024

Latest Generation of Multi-Spindle Lathe Increases Flexibility and Efficiency The MS40-8 multi-spindle automatic lathe from INDEX. The latest generation of the INDEX (Noblesville, IN) MS40-8 multi-spindle automatic lathe made its North American debut at IMTS 2024. Greater processing power with dual-core computer processors.

Function 52

Function Automation Continuous Production Cycle time 52

AU Manufacturing

APRIL 10, 2023

French power electronics company Schneider Electric announced the Australian launch of a new electric vehicle (EV) charger with new features aimed at making at-home charging easier to install and more cost-effective to use.

Electronics 80

Electronics Function Manufacturing 80

Robotics Business Review

MAY 15, 2024

Unitree Robotics unveiled its latest generation G1 humanoid robot at ICRA 2024. Unitree also showed an electric-powered humanoid doing a flip on flat ground. This was yet another homage to the famous Boston Dynamics hydraulic-powered Atlas robot doing similar athletic and parkour stunts.

Robotics 131

Robotics Robotics Bill of Materials Manufacturing 131

E&T

OCTOBER 12, 2022

China Electric Power Research Institute Low-voltage energy routing technology for distributed generation utilisation and highly reliable power supply. New iron-flow batteries decarbonising the grid and providing 24/7 renewable power. National Grid Electricity Transmission and The University of Manchester.

Automation 94

Automation Sourcing Manufacturing Digital manufacturing 94

Manufacturer's Monthly

SEPTEMBER 26, 2023

Pilot Air continues to meet the needs of the industrial sector with its latest addition, the ALTA TEC TS Series of industrial-grade air compressors. Martin Wyllie is the Director of Pilot Air and spoke about the latest release to Manufacturers’ Monthly. “In This latest model ticks all the boxes for industrial customers.

Function 98

Function Electronics Manufacturing 98

Robotics Business Review

FEBRUARY 12, 2025

Attendees will gain insights into the latest enabling technologies, engineering best practices, and emerging trends. Power density continues to be a cornerstone in robot actuator design, but this is often compromised by additional functionality required of actuators and their cabling.

Robotics 80

Robotics Robotics Automation Logistics 80

Fabricating & Metal Work

MARCH 20, 2025

The latest advancements in sawing technology, as well as streamlined and balanced feed rates and faster cutting rates, result in increases in both throughput and profits. Powered by the ProControl system and managed via the KASTOlogic mobile app, the KASTOsort tower guarantees fast, error-free operations and real-time process tracking.

Cycle time 52

Cycle time Automation Robotics Robotics 52

Manufacturer's Monthly

AUGUST 9, 2022

While we have some of the latest manufacturing technology, thanks to both local and international suppliers, we are also a country that maintains and continues to service existing equipment. Aware of the service Injectronics offer, Burt delivered the control module for inspection. Variable Frequency Drivers (VFD).

Electronics 98

Electronics Automotive Manufacturing 98

Manufacturer's Monthly

APRIL 25, 2023

Inspired by the human skin, researchers from the School of Material Sciences & Engineering have developed an electronic device that is able to detect mechanical stimuli for information processing, including gesture and handwriting recognition, with ultra-low power consumption.

Function 96

Function Artificial Intelligence Electronics Robotics 96

Manufacturer's Monthly

NOVEMBER 23, 2022

Manufacturers’ Monthly investigates CAPS Australia’s latest engineered instrument air project, which will utilise over 2.8 For over 41 years, CAPS has been Australia’s largest independent supplier of power generation and air compression products. One of our advantages, is that all the work is performed locally.

Fit 98

Fit Manufacturing 98

Fabricating & Metal Work

FEBRUARY 14, 2023

Single phase RoMan AC welding transformers are standard, and three-phase inverter-type Mid Frequency Direct Current (MFDC) power supplies are available. Various brands and models of welding controls from Entron and WTC are available from stock. The OP-AWS3-A integrates the process control of all mechanical and electrical parameters.

Cycle time 98

Cycle time Robotics Robotics Process control 98

Control Engineering

JULY 12, 2022

The tiny artificial muscles that control the robots’ wings emit colored light during flight. But for a tiny, power-constrained robot, we are forced to think about new modes of communication. However, the zinc particles only light up in the presence of a very strong and high-frequency electric field. Reid Weedon, Jr.

Robotics 98

Robotics Robotics Electronics Prototype  98

Manufacturer's Monthly

MAY 7, 2024

Image: Pilz Australia Tennant has raised the bar with the launch of their latest compact battery ride-on sweeper models S680 and S780. The Power of Tennant’s Latest Sweepers The S680 and S780 sweepers are Tennant engineered to deliver exceptional cleaning performance, thanks to their advanced features and robust design.

Logistics 98

Logistics Manufacturing 98

Automation Mag

JANUARY 14, 2025

Wieland Electric, in collaboration with Ross Controls, a company specializing in safety solutions for fluid power and poppet valve technology, is adding new TV-certified training courses CFSE – Certified Functional Safety Expert for Electrical and Fluid Power Systems.

Function 64

Function Compliance 64

Fabricating & Metal Work

JUNE 16, 2023

METAL CUTTING The next generation of multitasking machines, which combine one or two lathes with a machining center, and electric discharge machines (EDMs), continue to elevate metal cutting performance for a variety of materials. www.mcmachinery.com New Series of Wire EDMs The new CUT F 600 from GF Machining Solutions. .

Function 98

Function Automation Robotics Robotics 98