NIST Manufacturing

JUNE 23, 2025

The team has reviewed two dozen hypotheses, relying on extensive physical evidence, imagery, historical records, witness interviews, remote sensing data, laboratory testing, computer modeling and more. “As

Artificial Intelligence

Frost & Sullivan Manufacturing

APRIL 16, 2025

Specializing in designing, developing, and manufacturing advanced electronic analytical instruments, the company establishes its expertise in spectrophotometry, chromatography, electrochemistry, and flame photometry technologies. The company has a legacy of scientific innovation with the vision of becoming a globally renowned company.

Pharmaceutical

Design World

JULY 25, 2022

They are candidates for a wide range of applications including networking and communications equipment, industrial computers, sound and studio systems, laboratory instruments and industrial control. The new 2U shelves are DIN 41494 and IEC 60297-3 compliant. Slots in the bottom of the C4 mild steel shelves aid in-rack ventilation.

Fit

Additive Manufacturing

OCTOBER 3, 2022

September 29, 2022 — Waters Corporation introduced new, innovative powder rheology tooling and software for its TA Instruments HR Rheometers allowing scientists to make precise, repeatable powder analysis (rheology measurements) simpler and faster. MILFORD, Mass./September

Pharmaceutical

Canadian Manufacturing

MARCH 1, 2023

Digital Transformation Across Life Sciences Industry Boosts Instrumentation Market SAN ANTONIO — The development of next-generation sequencing (NGS) technology, a wide array of informatics, and robotics are some of the most recent technological advancements in life science instrumentation and research tools.

Artificial Intelligence

Automation Mag

JULY 9, 2024

Yusuf Altintas, founder and president of Vancouver-based Manufacturing Automation Laboratories ( MAL ), has been appointed to the Order of Canada, one of the nation’s highest civilian honours. The governor-general, Mary Simon, recognized 83 prominent Canadians on June 27 for their impacts on their respective fields.

Automation

Frost & Sullivan Manufacturing

MARCH 1, 2023

1st, 2023 – The development of next-generation sequencing (NGS) technology, a wide array of informatics, and robotics are some of the most recent technological advancements in life science instrumentation and research tools. San Antonio – Mar. billion in 2021 to $90.41 billion in 2026.

Artificial Intelligence

Frost & Sullivan Manufacturing

JULY 23, 2025

Laboratories today face increasing pressure to process more data, enhance accuracy, and meet stricter regulatory demands, without expanding headcount or budgets. Justifying ROI: Building the Business Case for Automation A common challenge for laboratories is justifying the upfront investment in automation.

Automation

MEM

MAY 16, 2023

Group (H.E.L), a global developer and manufacturer of innovative laboratory tools for process optimization, safety, and scale-up, today announced three senior appointments: Hasan Hallaq PhD as European Sales Director, Victoria Ordsmith as Director of Marketing and Sarennah Longworth-Cook as Director of People.

Pharmaceutical

Fabricating & Metal Work

NOVEMBER 7, 2023

a leading provider of dimensional metrology solutions, recently introduced the new  MarSurf  M 410 portable surface measurement instrument.  The MarSurf M 410 uses a skidless probe system designed for both laboratory and production environments that   makes recording and evaluating measurement data easier, more precise, and more versatile.

Function

i4.0 today

OCTOBER 11, 2023

The instrument will enhance the efficiency, accuracy and reliability of chromatography sample prep, with implications for analytical chemistry, proteomics and applications in biomedical research. It is a cost-effective tool for increasing productivity and sample quality.

Automation

Modern Machine Shop

AUGUST 29, 2024

Source: Hamar Laser Instruments Inc. Hamar Laser Instruments Inc. During the design process, Hamar Laser worked with a calibration laboratory to find ways to improve the lab’s existing methods. releases its L-703SP surface plate calibration system.

Electronics

Gil Automation

MAY 4, 2022

To check the status of electronic devices, measuring instruments are required. Digital multimeters are measuring tools that can measure voltage, current, and resistance among other things. As a result, even for beginners, these instruments are rather simple to operate. View More Digital Multimeters. Fluke 8808A 240V 5.5

Function

Gil Automation

MAY 4, 2022

To check the status of electronic devices, measuring instruments are required. Digital multimeters are measuring tools that can measure voltage, current, and resistance among other things. As a result, even for beginners, these instruments are rather simple to operate. View More Digital Multimeters. Fluke 8808A 240V 5.5

Function

Fabricating & Metal Work

SEPTEMBER 30, 2024

Laser Mechanisms’ (Novi, MI) new FiberWELD® DHµ is an ultra-compact laser wire direct energy deposition (DED) head for processing large-scale industrial parts, and aerospace components and tooling. Engineered for high duty cycle production applications, FiberWELD DHµ features both direct-cooled reflective optics and transmissive optics.

Additive manufacturing

Fabricating & Metal Work

JULY 19, 2023

Experienced staff from all the participating companies have the skills, tooling and knowledge not only to provide highly accurate alignment inspection data, but also to make the necessary mechanical adjustments. Calibration services can be performed onsite at the client’s facility or at one of the IPM ISO/IEC 17025 Accredited Laboratories.

Fit

Fabricating & Metal Work

NOVEMBER 18, 2023

Hamar Laser Instruments, Inc., During the design process, Hamar Laser worked with a calibration laboratory to find out what was most frustrating and time-consuming with the lab’s existing methods. Easy & fast setup that does not require the plate to be earth level. 30-60% faster than electronic levels and interferometers.

Electronics

Additive Manufacturing

DECEMBER 7, 2022

This includes repair parts that are deemed to be a reasonable substitute or low-risk factor parts, such as hand tools or training aids. Carrying handles, blocks, braces, hand tools, jigs, fixtures, and training aids. UAV components, specialized wrenches, and other tools. Examples include: . All parts require a 3D data package.

Additive manufacturing

MEM

MAY 11, 2023

As a new RMM technology it can provide a complementary tool to traditional culture-based methods. In particular, they will be meeting the demand for a modern class of instruments designed to support requirements in the newly revised Annex 1,” said Jamie Diamond, Director, MicronView LLC. Lightweight at just 5.8

Pharmaceutical

MEM

SEPTEMBER 7, 2023

Formerly known as PK Engineering and traditionally a supplier to laboratories and the instrumentation, aerospace and process industries, the company rebranded as NuMachine in 2020 as it looked to break into the automotive and electric vehicle sector. The supplier that ticked all the boxes for NuMachine was Yamazaki Mazak.

Cycle time

i4.0 today

MAY 12, 2023

Instrumentation manufacturer, Prior Scientific, is launching new products after achieving a ‘revolutionary’ leap in nanopositioning accuracy – after funding from Innovate UK. Prior is a legacy company, but it had limitations and little access to top quality research and development tools and minds. Today Magazine.

Manufacturing

Additive Manufacturing

OCTOBER 3, 2022

Air Force Research Laboratory (AFRL) contract that involves building the world’s largest additive manufacturing (AM) machine. The BMF Research Institute is being formed specifically to develop and incubate end-product ideas that are uniquely enabled by BMF’s micro 3D printing platform. million U.S.

3D printing

Modern Machine Shop

OCTOBER 31, 2024

For Soraluce, the machine head, which contains the components that enable the machine tool to complete machining operations, is the most important part of its machine tools. The machine head contains the components that enable the machine tool to complete machining operations. Photos provided by Soraluce.

Prototype 

Mold Making Technology

MARCH 1, 2022

Those companies awarded the grants were then able to invest in newer, more updated equipment and technologies, such as computer systems, additive manufacturing (AM) equipment and machine tools, which they might not have otherwise been able to afford, at least not in the near future.

Sourcing

Additive Manufacturing

JANUARY 5, 2023

Nikon announced an investment in Hybrid Manufacturing Technologies Global and their approach that enables users to integrate additive tools onto any platform. 3DCeram Sinto Expands 3D Printing Technology : 3DCeram Sinto has become the majority shareholder of the start-up TIWARI Scientific Instruments , that is becoming 3Dceram Sinto Tiwari.

Additive manufacturing

Automation Mag

APRIL 25, 2024

In this article, automation experts take a deep dive into the top industrial automation trends that can be instrumental in shaping the strategies and operations of Canadian manufacturers in 2024.

Automation

Manufacturer's Monthly

JUNE 4, 2025

Enhancing digital pathology workflows with instant cellular analysis in pathology and diagnostic laboratories. We utilise advanced equipment, including fibre splicers, laser welders, microscopes, curing ovens, optical power meters, and a range of custom-built instruments tailored for precision manufacturing.

Manufacturing

Dinesh Mishra

SEPTEMBER 22, 2024

Muralidhara Rao, Joint Director of Ace Designers Ltd – Machining Centre Division, reflects on his journey and delves into The Machine Tool Industry’s Path Through Disruption and Change. Can you describe the key trends currently shaping the machine tool industry? Company Name: Ace Designers Limited – Machining Center Division 1.

Supply Chain

Manufacturer's Monthly

NOVEMBER 21, 2023

Recently, the integration of automated and robotic tools has supercharged the field even further, transforming how materials scientists and engineers approach our work. CSIRO was an early believer in the transformative power of robotics and automation in research laboratories.

Robotics

E&T

DECEMBER 6, 2022

This collaboration is set to improve Colombia’s hurricane preparedness measures by using modelling tools in conjunction with the AWACs developed by scientific instrument designer and manufacturer Nortek. The oceanographic data provided by the instruments was critical for the work.

Sourcing

Manufacturer's Monthly

DECEMBER 23, 2024

We are working hard to deploy a prototype into pathology laboratories to assess clinical samples. However, the necessary tools to create it only became available recently. First, theres the instrumentation-based manufacturing, which includes the box that performs the assay using optical readout technology.

Prototype