Manufacturer's Monthly

MAY 23, 2023

Now fully owned and operated by AMTIL, AMW is Australia’s largest manufacturing solutions event , bringing far more sectors of Australian manufacturing under the same roof. In preparation for the show, 17kms of electrical cable was laid, 1,500 light fittings were installed, and we had 1,018 hours of security employed.

Manufacturing 104

Manufacturing Additive manufacturing Smart manufacturing Fit 104

E&T

JANUARY 30, 2023

Smart manufacturing Factories and manufacturing units have begun to become smart, and their numbers are likely to increase. Smart manufacturing is likely to give a new outlook as technologies such as AI, big data analytics, and human-machine interface are expected to give it an edge.

Smart manufacturing 105

Smart manufacturing Artificial Intelligence Manufacturing Supply Chain 105

Fabricating & Metal Work

SEPTEMBER 27, 2023

The eight technology pavilions, spread across three halls, explored critical sectors such as 3D/Additive Manufacturing, Forming and Fabricating, Finishing, METALFORM, Tube/Pipe, Robotics and Industrial Automation, Welding, and Welding Automation.

Form 52

Form Robotics Robotics Automation 52

E&T

SEPTEMBER 22, 2023

Industry Wales is taking the lead on promoting the Smart Manufacturing Data Hub (SMDH) to Welsh businesses. If you’re taking your first steps, I’d suggest starting slowly with some of the cheaper measures and then building up.” There are government moves to help businesses take some of these early steps.

Manufacturing 69

Manufacturing Supply Chain 3D printing Smart manufacturing 69

Metrology

SEPTEMBER 1, 2022

Metrology News recently sat down with Laurent Monge, the new President at Metrologic, for a discussion on its future vision for 3D metrology software and how it fits into Sandvik’s. The post 3D Metrology Performance Critical To Digital Manufacturing appeared first on Metrology and Quality News - Online Magazine.

Digital manufacturing 59

Digital manufacturing Manufacturing Fit Smart manufacturing 59

Cisco Smart Manufacturing

JUNE 21, 2018

There is no one size fits all view when it comes to manufacturing. Large, advanced plants are using a plethora of advanced manufacturing processes, robots and data as a core part of their operations. Source: Middle Market Manufacturing: How to Thrive in a Transforming Environment (2018). New materials/composites.

Supply Chain 52

Supply Chain Manufacturing Rapid prototyping Smart manufacturing 52

Control Engineering

AUGUST 17, 2023

To smart manufacturing enterprises, the ratio is 1 to every 4. This gap reflects a reality that enterprises, especially those in the smart manufacturing segment, have not yet advanced in their trials to combine big data sets and AR. Robotics and Computer Integration Manufacturing , 58. [3]

Industry 4.0 52

Industry 4.0 Industry 4.0 Smart manufacturing Electronics 52

Manufacturer's Monthly

JULY 19, 2023

Now fully owned and operated by AMTIL , AMW is Australia’s largest manufacturing solutions event, bringing far more sectors of Australian manufacturing under the same roof. In preparation for the show, 17kms of electrical cable was laid, 1,500 light fittings were installed, and we had 1,018 hours of security employed.

Manufacturing 75

Manufacturing Additive manufacturing Smart manufacturing Fit 75

Control Engineering

MARCH 28, 2023

Real-world examples will help fill skills gaps with smart manufacturing. We’re constantly running out of liquid nitrogen and we had to call for refills from the vendor almost daily, and once we finally got some data about what set point offsets worked for what set points, we had to determine which model fit the data best.

Automation 52

Automation Robotics Robotics Smart manufacturing 52

Control Engineering

MARCH 14, 2023

Real-world examples will help fill skills gaps with smart manufacturing. Tight tolerances can usually be more repeatable using robotics or other automation, and also the cost of a botched part due to a human error, something a lot of companies are looking to avoid, so investing in automation seems to make sense for that particular D.

Automation 52

Automation Made-to-spec Manufacturing Robotics 52

Automation Mag

APRIL 4, 2023

Advances in automation technologies are transforming the industrial manufacturing landscape. Broadly termed “digital transformation,” these smart manufacturing initiatives bring physical and cyber systems together for greater performance, efficiency, sustainability and safety. Manufacturers used to have a choice.

Automation 52

Automation Robotics Robotics Supply Chain 52

Control Engineering

AUGUST 17, 2023

Learning Objectives Understand how advances in PC-based controls, motion controls and robotics for food and packaging are making automation for food and beverage packaging easier to automate. seconds) and KR IonTec robot can help for food processing.

Robotics 52

Robotics Robotics Beverage Automation 52

Control Engineering

MARCH 25, 2023

As in other areas of edge computing, there is no one size fits all solutions, even in the same application the topology of the installation may determine if it’s better to fit several small distributed edge devices, or to bring signals and data into a larger, more centralized unit.”

Artificial Intelligence 52

Artificial Intelligence Function Automation Robotics 52

Factory Worx

APRIL 28, 2022

on manufacturing drives remarkable increases in quality, dependability, and agility, thanks to advanced automation, real-time communications and remote monitoring, and a tremendous amount of data that helps to drive decision-making. Why Smart Manufacturers Embrace FactoryWorx Industry 4.0 The influence of Industry 4.0

Industry 4.0 52

Industry 4.0 Industry 4.0 Artificial Intelligence Supply Chain 52

Control Engineering

NOVEMBER 13, 2022

When it comes to business, digital transformation is not a one-size-fits-all solution. It might not mean full-on machine learning with robots doing all the manual labor, but it’s surely more than just moving your stuff to the cloud and calling it a day. “This includes all the intangible Industry 4.0

Manufacturing 94

Manufacturing Industry 4.0 Industry 4.0 Electronics 94

Dinesh Mishra

JANUARY 30, 2023

Eventually, these hairpins need to fit into the exact grooves punched or cut into the stator stack sheets. Smart machines and robotics will handle more of the industrial work especially where human intervention would be seen as more dangerous to deploy. With the incubation of robotics and Industry 4.0,

Industry 4.0 52

Industry 4.0 Industry 4.0 Aerospace Automotive 52

Fabricating & Metal Work

OCTOBER 2, 2022

Pavilions are dedicated to 3D/additive manufacturing; finishing; forming & fabricating; METALFORM; robotics & industrial automation; tube & pipe; welding; and welding automation. A simple and widely relied upon joining technique, press fitting relies upon force and friction to hold two components together.

Automation 52

Automation Form Robotics Robotics 52

Control Engineering

FEBRUARY 8, 2023

EtherCAT communications: One frame, many nodes Bob Trask: Early on in my career, I was working with a group of people at Sercos, and they were figuring out that SercosII was the best fit for what they were trying to do at the time. They weren’t even talking about a controller. Even 20 years ago, the weak link was communications.

Cycle time 52

Cycle time Smart manufacturing Process control Discrete manufacturing 52

Control Engineering

MARCH 7, 2023

I think it would be useful for us to start by discussing the ways in which the growth in smart manufacturing — by which I mean the use of more sophisticated electronic controls and other computing components — has increased the demand for enclosures due to the need of course to protect that equipment. Read the full transcript below.

Automation 52

Automation Electronics Function Manufacturing 52

Control Engineering

NOVEMBER 24, 2022

CSIA and CESMII help system integrators with Smart Manufacturing. Integrating automation and control devices and systems improves Smart Manufacturing and can improve connections with higher-level systems helping supply chain integration. System integration, smart manufacturing competitive insights.

Smart manufacturing 52

Smart manufacturing Manufacturing Supply Chain Automation 52

Control Engineering

MAY 1, 2023

Raj Batra, president of Siemens Digital Industries USA and of the Siemens Foundation, an organization designed to help fill skills gap, opened the 2023 Manufacturing in America Summit by discussing how digitalization is helping automation advance manufacturing and other industrial applications. Courtesy: Mark T. Courtesy: Mark T.

Automation 52

Automation Manufacturing Supply Chain 3D printing 52