Fabricating & Metal Work

JULY 21, 2023

Bohrer said the air filtration product category is vast and encompasses everything from ambient air cleaners used to filter fine, airborne dust to mist collectors which remove oil-, water-, and synthetic-based coolants used in machining operations. Ambient air cleaners are perhaps the most widely used type of air cleaner,” Bohrer said.

Sourcing 96

Sourcing Automation Composites Manufacturing 96

Manufacturer's Monthly

DECEMBER 7, 2022

As a result, Australian wheat producers and grain processing facilities are facing greater pressure than ever before to keep production running seamlessly, as prime grain harvesting season draws nearer during the spring, according to Tony Tormey, category manager for Industrial Bearings at Motion Australia.

Fit 98

Fit Manufacturing 98

Foley

APRIL 11, 2023

The core of these investigations remains the same— i.e. , the ITC evaluates the injury to a domestic industry by an alleged statutory violation or other unfair act, but the semiconductor chip as a component of the imported automotive article is a newer target and implicates new issues. The exclusion order is issued to U.S. 337-TA-928.

Automation 75

Automation Automotive Electronics Supply Chain 75

i4.0 today

SEPTEMBER 19, 2023

According to IDTechEx’s research, there has been a significant cumulative increase in funding for various types of mobile robots (e.g., The IDTechEx report analyzes both AGVs and AMRs and provides an independent analysis of what scenarios these two robot types would be favorable to users. from 2015 to 2022.

Logistics 52

Logistics Robotics Robotics Warehousing 52

iBASEt

JANUARY 24, 2023

Forbes, The Economist, and every other business publication all have featured in-depth articles on the topic. The answers really fall into a few broad categories: Quality of work life A sense of self-worth The ability to succeed Quality of work-life revolves around the work-life balance.

Manufacturing 78

Manufacturing Fit Additive manufacturing Robotics 78

Nexus Integra

MAY 23, 2022

Throughout this article, we will explain what this type of intelligent implementation consists of and how Nexus Integra can help you to make your company part of a digitalised future. Machine vision types. This is the simplest type, as its capabilities are the most limited. Machine vision is inherent to Industry 4.0

Industry 4.0 40

Industry 4.0 Industry 4.0 Artificial Intelligence Automotive 40

Automation Mag

JANUARY 22, 2024

In this article, we will discuss the types of quantum sensing technologies, their implications in manufacturing and where the field is headed. Within these approaches, quantum-sensing technologies can be grouped into five distinct categories with complementary benefits.

Manufacturing 54

Manufacturing Automotive Aerospace 54

Mold Making Technology

NOVEMBER 8, 2022

I must admit, I was only vaguely familiar with the nomenclature of a few of the many types of fits. With the possible exception of those of you who design high-cavitation, unscrewing or multiple interchangeable molds, most designers rarely, if ever, need to know the various definitions, specifications and use of the various types of fits.

Fit 103

Fit Function Lead Time Robotics 103

21st Century Tech

APRIL 1, 2023

Back in 2012, I posted an article describing the creation of a thermal invisibility cloak designed to hide electronic heat signatures. It was made from thin PVC-type polymers, silver and gold and certainly sounds like it fit the category. I didn’t call the material used meta.

Composites 82

Composites Fit Electronics Sourcing 82

Control Engineering

JANUARY 22, 2023

These types of safety issues impact all types of operations and not just the largest industrial sites. In support of these best practices, this article identifies how some newer products and/or the addition of automation, can increase the effectiveness of safety controls.

Automation 52

Automation Function Compliance Manufacturing 52

Fastener News Desk

MAY 11, 2023

McKinsey & Company – Listen to the article: What is supply chain? McKinsey has classified supply chain shocks into four different types , based on their impact, lead time, and frequency of occurrence: Unanticipated catastrophes. This category of emissions can account for 80 percent of many companies’ overall climate impact.

Supply Chain 52

Supply Chain Value chain Industry 4.0 Industry 4.0 52

Control Engineering

JULY 19, 2022

This article examines some of the progress over the years, and how analytics must supplement data acquisition to provide value. . Limited data type handling. Four types of analytics . There are four primary analytics categories, and each is a distinct tool for improving operations: . Industrial communication evolution.

Industry 4.0 52

Industry 4.0 Industry 4.0 Overall Equipment Effectiveness (OEE) Artificial Intelligence 52

CMTC Manufacturing Tech

FEBRUARY 4, 2022

4 Types of Benchmarking. 4 Types of Benchmarking. When reviewing what is benchmarking, it’s important to note that there are four approaches to this process, including: Internal Benchmarking: This type of benchmarking involves comparing internal manufacturing metrics across product lines, units, departments, initiatives, etc.

Benchmarking 52

Benchmarking Manufacturing Cycle time Sourcing 52

Dinesh Mishra

MARCH 28, 2023

The type of ground referencing of the electrical power source with respect to ground/chassis plays an important role in ensuring safety. There are 2 major types of grounding used in electrical installation. Grounded and Ungrounded. In the grounded system, the electrical power source reference pole is connected to the ground/chassis.

Automotive 52

Automotive Function Sourcing Electronics 52

Infinite Uptime

MAY 10, 2022

This article discusses Predictive Maintenance, a new age approach for plant maintenance, and why an IoT-led Predictive Maintenance approach can solve most of your maintenance worries for your cement plants. The sheer number of diverse machines makes it difficult to find the same variety of expertise and strength in numbers to manage them.

Function 52

Function Automation Industry 4.0 Industry 4.0 52

Control Engineering

OCTOBER 20, 2022

KP: Would you call solutions from Augmentir part of a new category of software solution? . We think of ourselves in that latter category, that we’ve built our product on an AI foundation. When you type in a search term, you’re directly benefiting from this embedded AI that keeps making the search results better and better.

Artificial Intelligence 52

Artificial Intelligence Manufacturing Pharmaceutical Beverage 52

Mold Making Technology

JANUARY 26, 2023

In this article, we’ll cover several metal additive technologies and describe the types of tools or tool components they’re being used to produce and why. One such technology is wire-arc additive manufacturing ( WAAM ), a subset of the broader directed energy deposition (DED) category of 3D metal printing.

Composites 52

Composites 3D printing Cycle time Lead Time 52

Mold Making Technology

DECEMBER 4, 2022

With Christmas right around the corner, MoldMaking Technology is gifting you, our readers, with an annual top-viewed article series covering products, profiles, tips and case studies, available each Monday leading up to the new year. 1, 2022 to Nov. 28, 2022): Cutting Tools. Additive Manufacturing. Mold Materials. Hot Runners. Automation.

3D printing 98

3D printing Cycle time Automation Additive manufacturing 98

Dinesh Mishra

JANUARY 2, 2023

Mr. Jayaraman spoke shared insights on a number of areas related to sustainable technologies such as the types of in-use and in-development renewable energy sources, best practices and as importantly why the issue of addressing climate change is so vital for the aerospace industry. Track 2 : EV Adoption: The India Story. Eye for Detail.

Aerospace 52

Aerospace Manufacturing Point of use Artificial Intelligence 52

Dinesh Mishra

SEPTEMBER 20, 2022

The REHAU technology of Radiant Heating and Cooling is applicable to work in any type of climatic conditions, including extreme temperature variation and changing humidity factor. The primary advantage of using radiant heating and cooling is that it significantly reduces the amount of energy needed for air conditioning.

Function 52

Function Composites Manufacturing 52

Foley

JULY 11, 2023

Below, we describe various types of cybersecurity risks and attacks faced by manufacturers and outline some of the legal implications and considerations that entities in the manufacturing industry should consider. This category of software is designed to infiltrate, damage, or disrupt systems.

Manufacturing 40

Manufacturing Compliance Supply Chain Form 40

Canadian Metalworking Magazine

JUNE 24, 2021

Track all types of cyber attacks with a single smart topic priority. Simply navigate to the security category you want to add this insight to and enter “cyber attack” as a topic. With the ‘Less Like This’ button, you can let Leo know the article he prioritized is wrong or not relevant to you. Go to video tutorial.

Supply Chain 78

Supply Chain 78

Canadian Metalworking Magazine

JUNE 24, 2021

Feedly AI understands all types of cyber attacks and can track them for you The only constant in the realm of cyber security is change; hackers are continuously maturing and becoming more sophisticated, attack patterns are constantly evolving, and the threat landscape is growing more volatile every day; one cyber attack occurs every 39 seconds.

Supply Chain 52

Supply Chain 52