Canadian Manufacturing

JULY 13, 2023

Under the terms of the agreement, the Parties will work together to design a proof-of-concept Coil Driver plus motor system that would specifically fit into a defined electric machine housing.

Automotive 40

Automotive Prototype  Electronics Fit 40

Modern Machine Shop

OCTOBER 15, 2023

Ryan Kuhlenbeck spent nearly two decades at General Motors, Tesla and Alta Motors before co-founding Pico MES , a manufacturing execution system designed to specifically address the kinds of frustrations between supplier and manufacturer that Kuhlenbeck experienced in the automotive industry. Most OEMs are blind to that.

Supply Chain 105

Supply Chain Aerospace Automotive Manufacturing 105

SMMT

JUNE 15, 2023

from the automotive industry. The latest multi-million-pound boost is designed to help the UK’s automotive industry stay ahead of international competition, while delivering economic growth and the creation of high-quality jobs. A total of £38.4m of the investment comes from Government, supported by a further £38.7m Ford The FCVGEN2.0–Ford

Supply Chain 52

Supply Chain Fit Automotive Prototype  52

Manufacturer's Monthly

AUGUST 9, 2023

This capability has become increasingly important, especially in times of supply chain disruptions, as it reduces lead times and ensures uninterrupted production. Speaking about Markforged’s vision, Terem emphasised the importance of creating high-value, end-use manufacturing applications that solve supply chain challenges.

Additive manufacturing 87

Additive manufacturing 3D printing Manufacturing Supply Chain 87

Canadian Manufacturing

DECEMBER 18, 2023

“It’s a great fit and we do not see that as a high level risk factor. Steel prices more than quadrupled near the start of the pandemic to near $2,000 per metric ton by the summer of 2021 as supply chains experienced gridlock, a symptom of surging demand for goods and the lack of anticipation of that demand.

Supply Chain 52

Supply Chain Fit Automotive Manufacturing 52

Additive Manufacturing

NOVEMBER 20, 2022

“AMFG was the solution that best fit our requirements to manage all our streams for Additive Manufacturing,” said Arnaud Cosson, Digital Workflow Engineer at Decathlon, a multinational sports retailer brand with over 2000 stores worldwide. The post Autonomous Manufacturing: AMFG Receives $8.5

3D printing 98

3D printing Manufacturing Rapid prototyping Additive manufacturing 98

ATS

JULY 21, 2023

A manufacturing track and trace system allows businesses to follow the life cycle of individual products or components throughout the supply chain. Giving a clear visibility of goods from production to the end customer is an integral part of a robust supply chain management system. What is track and trace?

Manufacturing 52

Manufacturing Supply Chain Compliance Pharmaceutical 52

Canadian Manufacturing

APRIL 23, 2024

” GreenPower’s EV Star Utility Truck is purpose-built and fully customizable to fit a range of vocational applications and utility use-cases. . “GreenPower’s expertise fuels our innovation, propelling the all-electric commercial vehicle industry forward to meet growing demand for safe, sensible and sustainable fleets.”

Fit 119

Fit Manufacturing Supply Chain Automotive 119

ATS

MARCH 31, 2023

For example, supply chain and sourcing decisions have an impact on an organization’s overall carbon footprint, as do fulfillment logistics. These steps include: Assess Net Zero Readiness This stage involves a high-level view of your operations and processes, particularly how they fit together in the overall scheme of the organization.

Manufacturing 52

Manufacturing Supply Chain Logistics Fit 52

Manufacturer's Monthly

JUNE 21, 2023

Industrial manufacturing, automotive, water treatment plants, theme parks, food and beverage manufacturing, and medical and pharmaceutical clients across Australia continue to choose Pilot Air for their compressed air solutions. We solve that problem and ensure the solution is future-proofed with ongoing support.

Pharmaceutical 93

Pharmaceutical Beverage Supply Chain Fit 93

SMMT

JULY 6, 2023

British automotive manufacturing plants reduce CO 2 emissions by -2.8% Mike Hawes, SMMT Chief Executive , said, Britain’s automotive industry is building record numbers of zero emission vehicles while cutting its carbon footprint to a record low. Race to Zero: Powering Up Britain’s EV Supply Chain.

Manufacturing 64

Manufacturing Automotive Supply Chain Logistics 64

Frost & Sullivan Manufacturing

JUNE 19, 2023

Daimler’s recent announcement regarding OEM integration of Lytx video hardware as factory fit; explorations into several application areas for AI being researched upon and investigated by TSPs like Samsara, Motive and AI enablers like Ambrella AI and Visionary AI suggest the significance of such tech-driven innovations in future market growth.

Freight 52

Freight Supply Chain Logistics Value chain 52

Canadian Manufacturing

MAY 16, 2023

The truck is fitted with a 24ft box and is meant for the downtown core because of its reportedly narrow turning circle and tight form factor. GoBolt, a technology company with a vertically integrated supply chain network, has been a significant client to 7Gen.

Supply Chain 52

Supply Chain Fit Form Automotive 52

Control Engineering

FEBRUARY 22, 2023

Learning Objectives Shell in the petrochemical industry and ZF Group in the automotive industry explained how digitalization efforts are helping with sustainability goals. Optimal operation depends on the quality, design and condition of the gear set; lubricants that fit the operating conditions; and regular evaluations and maintenance.

Automotive 52

Automotive Smart manufacturing Automation Industry 4.0 52

Fastener News Desk

MARCH 2, 2023

Louis, MO, operates globally and provides solutions such as engineering support, sales and marketing, distribution, and high-touch service to customers in the automotive, industrial, and other technical end markets. Providing a high level of engineering support to customers and protecting supply chains is a cornerstone of EFC’s model.

Automotive 52

Automotive Supply Chain Fit Lead Time 52

MEM

JULY 10, 2023

Oetiker is currently celebrating an outstanding 80 years in business and attribute its success to manufacturing high-quality products, providing excellent service, and securing trustworthy supply chain partnerships. These include fluid power experts Tom Parker Ltd, who have distributed Oetiker’s products in the UK for over 20 years.

Beverage 52

Beverage Supply Chain Fit Automotive 52

SMMT

DECEMBER 15, 2022

Having worked in the automotive space for over three decades, I felt that the narrative around EV adoption needed a fresh perspective. Minimalist style paired with over 90 customisation options makes the Andersen A2 charging unit ideal for those seeking a truly personal design that fits harmoniously with their home. EVIOS secured £5.8

Function 52

Function Supply Chain Fit Automotive 52

MEM

DECEMBER 6, 2022

Speaking on Stratasys’ role in the manufacturing supply chain, Mr Langfeld said: “So, the benefit of our 3D printing solutions is that first of all, you can pick and choose for the relevant use case. We don’t need to squeeze a certain technology into a use case where it doesn’t fit. Full line-up of speakers.

3D printing 52

3D printing Prototype  Additive manufacturing Supply Chain 52

Dinesh Mishra

JULY 19, 2022

They are used to produce flexible and rigid foams, elastomers, adhesives, sealants and coating, which find application across a wide range of necessary everyday products, from mattresses and automotive interiors, building insulation and refrigeration to sports and footwear, protective coatings and industrial products.

Supply Chain 52

Supply Chain Value chain Form Fit 52

Modern Machine Shop

MARCH 16, 2023

” This was fitting, as an expedition’s success is oftentimes determined by the team’s preparation, and Studer’s products aim to ready manufacturers for potential uncharted waters in 2023 and beyond. The event revolved around the theme of “Expedition 2023.”

Manufacturing 98

Manufacturing Warehousing Automation Robotics 98

Fabricating & Metal Work

JULY 21, 2023

Manufacturers are under increasing pressure to produce and distribute products more sustainably and so are looking at ways to bring down the carbon emissions of the supply chain. Companies across sectors are looking broadly at two objectives: becoming more efficient and safeguarding against instability in the global supply chain.

3D printing 52

3D printing Additive manufacturing Supply Chain Lean manufacturing 52

Control Engineering

APRIL 9, 2023

Learning Objectives As supply chains are disrupted, baby boomers age out and the need for general use products continues to grow, manufacturers are faced with producing more with less. An integrator that touts a “we can do anything” mentality may not be the right fit for specific end user requirements.

Robotics 64

Robotics Robotics Supply Chain Automation 64

Canadian Manufacturing

MAY 15, 2023

And producing the batteries that power them requires a solid supply chain. “So when I saw that there was this big generational shift toward electric vehicles and I said, ‘There must be a fit.'” .'” Volkswagen has sold cars in Canada for decades, but it has never made them here.

Supply Chain 98

Supply Chain Assembly Line Fit Manufacturing 98

Control Engineering

AUGUST 14, 2022

Whether it’s combating supply chain instability, labor shortages, lead times, or seamless integration, the right industrial enclosure solution is the heart of your automation system, and manufacturers need industrial cabinets that help them overcome these challenges. subhead] Modular enclosures helps maximize factory floor space.

Manufacturing 52

Manufacturing Electronics Automation Beverage 52

Robotics Business Review

JANUARY 2, 2024

Meili Technologies finds product-market fit Rather than invest huge sums of money in Level 5 autotech, Lee iterated to find a product-market fit with today’s trucking fleets. We’ve done many pilots both in automotive, as well as the commercial space,” she said. The post Will autotech ventures race east in 2024?

Robotics 87

Robotics Robotics Sourcing Fit 87

Fabricating & Metal Work

JANUARY 19, 2023

The company also makes inductive shrink fit machines, which are a method of shrinking a tool holder, and which is the most accurate method of holding a cutting tool in a tool holder, Holden said. This modular shrink fit automation cube was created to address the challenge of the hidden costs involved in setting up tools in the tool room.

Fit 52

Fit Automation Function Manufacturing 52

Modern Machine Shop

APRIL 10, 2023

I almost ran my car off the road, when you look at the supply chain, and be able to say, hey, each region, every country in the world today, we need to make sure that we secure our own interests. So it was really optimizing a supply chain, a low-cost supply chain.

Made-to-spec 98

Made-to-spec Supply Chain Logistics Manufacturing 98

Design World

JULY 26, 2022

And then, we do quite a bit of work within the automotive industry, mostly for protecting sensitive equipment that’s used on different vehicles. We can design the product to fit into an envelope, but it might not be the proper shape value to offer the best performance. For example, it might give you 80% or 75% isolation.

Cargo 264

Cargo Supply Chain Fit Automotive 264

Fastener News Desk

JANUARY 31, 2024

The course will explore how specific geometric characteristics are used to describe fit, form, and function on threaded fasteners. This powerful integration unlocks a wealth of data-driven intelligence for NAW members and MDM subscribers. NAW Expands Reach and Deepens Resources with Acquisition of MDM MEIDOH Co., to 4:00 p.m.

Aerospace 52

Aerospace Supply Chain Manufacturing Fit 52

Fastener News Desk

APRIL 18, 2023

About Würth Group The Würth Group is a worldwide wholesaler of fasteners, screws and screw accessories, dowels, chemicals, electronic and electromechanical components, furniture and construction fittings, tools, machines, installation material, automotive hardware, inventory management, storage and retrieval systems. www.fastenal.com.

Supply Chain 69

Supply Chain Fit Warehousing Manufacturing 69

Canadian Manufacturing

APRIL 15, 2024

“Through Piedmont Truck Center and Matthews Specialty Vehicles’ unique upfit solutions, customers can secure GreenPower’s all-electric vehicles to fit a range of applications. ” Taking place on Saturday, April 20, from 10 a.m.

Cargo 52

Cargo Fit Supply Chain Manufacturing 52

E&T

JANUARY 30, 2023

Could it be an opportunity to scout around for unexplored raw materials and create a value-add to the supply chain? So going ahead, machines will be fitted with sensors that can be plugged into a data-rich environment. Perhaps it could attract venture capitalists. Let’s face it, humanity drives the purpose of work.

Smart manufacturing 105

Smart manufacturing Artificial Intelligence Manufacturing Supply Chain 105

Canadian Manufacturing

SEPTEMBER 9, 2022

We are very excited to be moving into Canada and we believe our RVs are an excellent fit for the northern climate. Abbotsford — East to West has announced a national partnership with Canadian RV dealer Fraserway RV, introducing the East to West product line to Canada. “We

Manufacturing 52

Manufacturing Fit Supply Chain Automotive 52

Fabricating & Metal Work

DECEMBER 20, 2022

There are some very hard business benefits to pursuing this course and compliance fits into this as well,” Tate noted. Novelis has partnered with its suppliers and its customers in the aerospace, automotive, beverage can and other industries on the road to being carbon neutral by 2050 — or sooner. Novelis, Inc.,

Compliance 105

Compliance Industry 4.0 Industry 4.0 Supply Chain 105

Fabricating & Metal Work

AUGUST 28, 2023

Those who manufacture anything that moves should attend the Motion + Power Technology Expo to discover the latest advancements moving the entire power transmission supply chain forward, including mechanical, fluid power, electric and hybrid technologies. mm and specials down to 0.02

Supply Chain 52

Supply Chain Manufacturing Cycle time Automation 52

Modern Machine Shop

MARCH 28, 2023

They include pragmatic and logistical considerations about supply chain distribution, concerns about intellectual property theft, the loss of brand reputation and customer loyalty, as well as what a former guest on the series called feelings of economic patriotism. So 10 years ago, supply chain was a concern for us.

Supply Chain 52

Supply Chain Fit Manufacturing Sourcing 52

E&T

DECEMBER 2, 2022

As we cruise over the Thames, Matthew Quitter, the firm’s founder, points out the improved performance this conversion provides: “We wouldn’t have been able to pull away from that roundabout anywhere near as fast [before an EV battery was fitted].” Still, it’s an impressive job, and the firm has introduced some nice touches.

Supply Chain 89

Supply Chain Fit Automotive Manufacturing 89