Control Engineering

OCTOBER 5, 2023

“We took inspiration from ‘intermittent computing,’ which breaks complex programs into small steps, so a device with very limited power can work incrementally, as energy is available,” said co-lead author Kyle Johnson , a UW doctoral student in the Paul G. Allen School of Computer Science & Engineering.

Robotics 52

Robotics Robotics Sourcing Discrete manufacturing 52

Control Engineering

JANUARY 14, 2023

“And measuring strain is useful in many applications, such as devices that measure blood pressure and technologies that track physical movement,” said Yong Zhu, corresponding author of a paper on the work and the Andrew A. – Edited by Chris Vavra, web content manager, Control Engineering , CFE Media and Technology, cvavra@cfemedia.com.

Aerospace 52

Aerospace Discrete manufacturing Manufacturing 52

Control Engineering

MARCH 15, 2023

22, a former graduate student in Petersen’s lab, is the paper’s first author, and Kevin O’Keeffe Ph.D. ‘17, 17, a former graduate student in applied mathematics, is a co-author. 22, a former graduate student in Petersen’s lab, is the paper’s first author, and Kevin O’Keeffe Ph.D. ‘17, Steven Ceron, Ph.D. ‘22,

Robotics 52

Robotics Robotics Discrete manufacturing Manufacturing 52

Control Engineering

NOVEMBER 17, 2022

If we take a step back, what this reveals is the power available from these machine-learning techniques, and ways to use these computational resources to make progress,” said Theodore Golfinopoulos, a research scientist at the MIT Plasma Science and Fusion Center and co-author of a paper detailing these approaches. Simulating blobs.

Artificial Intelligence 98

Artificial Intelligence Sourcing Industry 4.0 Industry 4.0 98

Control Engineering

MARCH 28, 2023

“A caterpillar’s movement is controlled by local curvature of its body – its body curves differently when it pulls itself forward than it does when it pushes itself backward,” said Yong Zhu, corresponding author of a paper on the work and the Andrew A. Adams Distinguished Professor of Mechanical and Aerospace Engineering at NC State.

Robotics 52

Robotics Robotics Aerospace Discrete manufacturing 52

Control Engineering

SEPTEMBER 29, 2022

“When we excited the material at different laser intensities, we found that it emits three pulses of superfluorescence at regular intervals for each excitation,” said Shuang Fang Lin, associate professor of physics at North Carolina State University and co-corresponding author of the research.

Electronics 52

Electronics Sourcing Manufacturing 52

Control Engineering

JUNE 17, 2023

“There is a great deal of interest in developing AI-powered training technologies that can understand teamwork dynamics and modify their training to foster improved collaboration among team members,” said Wookhee Min, co-author of a paper on the work and a research scientist at North Carolina State University. student at NC State.

Artificial Intelligence 52

Artificial Intelligence Industry 4.0 Industry 4.0 Manufacturing 52

Control Engineering

OCTOBER 26, 2022

“What we realized by analyzing our collected data from the individuals in the study was that the masks that we use in daily life are not very suitable for female participants,” said Canan Dagdeviren, the LG Career Development Professor of Media Arts and Sciences at MIT and the corresponding author of the study. Mask fit quality.

Fit 98

Fit Electronics Discrete manufacturing Manufacturing 98

Control Engineering

OCTOBER 4, 2022

“We’ve been heavily relying on the work of Mason, Raibert, and Craig on what we call a hybrid force position controller,” said Hyung Ju Suh, a PhD student in electrical engineering and computer science at MIT, CSAIL affiliate, and lead author on a new paper about SEED.

Robotics 98

Robotics Robotics Compliance Artificial Intelligence 98

Control Engineering

MAY 29, 2023

This can be applied in many different areas,” said Kushagra Tiwary, a graduate student in the Camera Culture Group at the Media Lab and co-lead author of a paper on this research. – Edited by Chris Vavra, web content manager, Control Engineering , CFE Media and Technology, cvavra@cfemedia.com.

Artificial Intelligence 52

Artificial Intelligence Discrete manufacturing Manufacturing 52

Control Engineering

AUGUST 4, 2023

“RoboMapper allows us to conduct materials testing more quickly, while also reducing both cost and energy overhead – making the entire process more sustainable,” said Aram Amassian, corresponding author of a paper on the work and a professor of materials science and engineering at North Carolina State University. student at NC State.

Robotics 52

Robotics Robotics Composites Assembly Line 52

Control Engineering

MARCH 14, 2023

“The angle of a plant’s leaves, relative to its stem, is important because the leaf angle affects how efficient the plant is at performing photosynthesis,” said Lirong Xiang, first author of a paper on the work and an assistant professor of biological and agricultural engineering at NC State.

Robotics 52

Robotics Robotics Automation Discrete manufacturing 52

Control Engineering

JULY 21, 2023

Yixin Shao, a PhD student in Khalili’s lab , was the first author. Khalili and his team presented this work in the paper “ Reconfigurable Physically Unclonable Functions Based on Nanoscale Voltage-Controlled Magnetic Tunnel Junctions ,” published in the journal Advanced Electronic Materials.

Supply Chain 52

Supply Chain Electronics Aerospace Function 52

Control Engineering

JULY 13, 2022

“However, sometimes the nature of a client’s personal data results in changes to the local model that work well only for the client’s own data, but don’t work well when applied to other data sets,” said Chau-Wai Wong, corresponding author of a paper on the new technique and an assistant professor of electrical and computer engineering at NC State.

Artificial Intelligence 52

Artificial Intelligence Benchmarking Form Industry 4.0 52

Control Engineering

MARCH 27, 2023

Courtesy: Chris Vavra, CFE Media and Technology Digital twins and logistics Improving logistics through automation is more than extending a robot arm onto a truck. Chris Vavra , web content manager, CFE Media and Technology, cvavra@cfemedia.com. We try and stay cutting edge. It’s about training and retaining folks.”

Logistics 59

Logistics Robotics Robotics Automation 59

Control Engineering

FEBRUARY 6, 2023

His MIT co-authors are lead author Dahlia Klein PhD ’21, graduate student Li-Qiao Xia, and former postdoc David MacNeill, along with Kenji Watanabe and Takashi Taniguchi of the National Institute for Materials Science in Japan. This could pave the way for a new generation of twisted, graphene-based superconducting electronics.”

Electronics 95

Electronics Discrete manufacturing Manufacturing 95

Control Engineering

AUGUST 22, 2023

said Mark Bathe, an MIT professor of biological engineering and the senior author of the new study. MIT postdocs Chi Chen and Xin Luo are the lead authors of the paper , which appears today in Science Advances. – Edited by Chris Vavra, web content manager, CFE Media and Technology, cvavra@cfemedia.com.

Form 52

Form Fit Bottleneck Electronics 52

Control Engineering

OCTOBER 3, 2023

“Interestingly, this effect resonates remarkably well with its biological counterpart — a visual memory naturally enhances the sensitivity to tactile stimulus,” said co-first author Najam U Sakib, a third-year doctoral student in engineering science and mechanics. For this work, we only looked into two senses.

Artificial Intelligence 52

Artificial Intelligence Robotics Robotics Discrete manufacturing 52

Control Engineering

MAY 22, 2023

– Edited by Chris Vavra, web content manager, Control Engineering , CFE Media and Technology, cvavra@cfemedia.com. Freeman, the Thomas and Gerd Perkins Professor of Electrical Engineering and Computer Science and a member of CSAIL. The research is being presented at the International Conference on Learning Representations.

Artificial Intelligence 52

Artificial Intelligence Industry 4.0 Industry 4.0 Manufacturing 52

Control Engineering

AUGUST 26, 2022

– Edited by Morgan Green, CFE Media and Technology, mgreen@cfemedia.com. However, simplifying the problem too much can actually create a new set of problems, since real world scenarios are rarely simple. “The The post Helping autonomous vehicles navigate tricky highway merges appeared first on Control Engineering.

Automotive 52

Automotive Automation Manufacturing 52

Control Engineering

AUGUST 25, 2022

“Dyes are used everywhere, including in the textile industry, as well as in pharmaceuticals, cosmetics, paper, leather and even in medicines,” said Januka Budhathoki-Uprety , lead author of a paper on the work and an assistant professor of textile engineering, chemistry and science at NC State. “If

Pharmaceutical 52

Pharmaceutical Sourcing Process manufacturing Manufacturing 52

Control Engineering

JULY 17, 2023

By providing that localized control, our technique can improve how researchers investigate and tune the properties of materials for diverse applications.” – Edited by Chris Vavra, web content manager, CFE Media and Technology, cvavra@cfemedia.com.

Sourcing 52

Sourcing Form Function Electronics 52

Control Engineering

SEPTEMBER 30, 2023

Existing techniques for extracting 3D information from 2D images are good, but not good enough,” said Tianfu Wu, co-author of a paper on the work and an associate professor of electrical and computer engineering at North Carolina State University.

Artificial Intelligence 52

Artificial Intelligence Industry 4.0 Industry 4.0 Manufacturing 52

Control Engineering

JULY 15, 2022

The project led by Rice chemist Bruce Weisman , structural engineer Satish Nagarajaiah and lead author and graduate student Wei Meng springs from the 2002 discovery by Weisman that semiconducting carbon nanotubes fluoresce at near-infrared wavelengths.

Discrete manufacturing 98

Discrete manufacturing Manufacturing 98

Control Engineering

SEPTEMBER 5, 2023

Terry Suh, an electrical engineering and computer science (EECS) graduate student and co-lead author of a paper on this technique. – Edited by Chris Vavra, web content manager, CFE Media and Technology, cvavra@cfemedia.com. There are benefits to doing things that are beyond the black box,” Suh said.

Robotics 52

Robotics Robotics Artificial Intelligence Discrete manufacturing 52

Control Engineering

JULY 24, 2022

Doug Short, CIO and CISO, Trinity River Authority of Texas. Dragos is a CFE Media content partner. After covering the survey results, we turned it over to our panel of experienced CISOs (and coincidentally, all Air Force veterans!). Shon Gerber, CISO, INVISTA. Paul Reyes, CISO, Vistra. Steve Applegate, CISO, Dragos.

Function 98

Function Manufacturing 98

Control Engineering

JULY 22, 2022

– Edited by Morgan Green, associate editor, CFE Media and Technology, mgreen@cfemedia.com. The post Solving the puzzle of 2D materials disorder appeared first on Control Engineering.

Fit 52

Fit Electronics Form Discrete manufacturing 52

Control Engineering

SEPTEMBER 18, 2023

“Building a photonic computing system without a count-action programming abstraction is like trying to steer a Lamborghini without knowing how to drive,” said Ghobadi, who is a senior author of the paper. – Edited by Chris Vavra, web content manager, CFE Media and Technology, cvavra@cfemedia.com. What would you do?

Electronics 52

Electronics Artificial Intelligence Bottleneck Fit 52

Control Engineering

DECEMBER 22, 2022

But by engineering the shape of the loop, so one side of the loop is permanently twisted, the structure is asymmetrical,” said Jie Yin, corresponding author of a paper on the work and an associate professor of mechanical and aerospace engineering at NC State. If the ring robot is symmetrical, this will essentially make it dance in place.

Robotics 52

Robotics Robotics Aerospace Discrete manufacturing 52

Control Engineering

JUNE 19, 2023

A lot of people have looked at it but didn’t know how to handle such high-dimensional and complex dynamics,” says Chuchu Fan, the Wilson Assistant Professor of Aeronautics and Astronautics, a member of the Laboratory for Information and Decision Systems (LIDS), and senior author of a paper on this technique.

Robotics 52

Robotics Robotics Form Artificial Intelligence 52

Control Engineering

AUGUST 9, 2022

Earlier research, including work by David Broido, who is a co-author of the new paper, had theoretically predicted that the material would have high thermal conductivity; subsequent work proved that prediction experimentally. Heat is now a major bottleneck for many electronics,” said Shin, the paper’s lead author.

Electronics 98

Electronics Form Bottleneck Function 98

Control Engineering

JULY 12, 2022

Assistant Professor in the Department of Electrical Engineering and Computer Science (EECS), the head of the Soft and Micro Robotics Laboratory in the Research Laboratory of Electronics (RLE), and the senior author of the paper. The process adds just 2.5 percent more weight without impacting the flight performance of the robot.

Robotics 98

Robotics Robotics Electronics Prototype  98

Control Engineering

AUGUST 13, 2022

student and first author of the paper. – Edited by Chris Vavra, web content manager, Control Engineering , CFE Media and Technology, cvavra@cfemedia.com. Zhu’s group at Georgia Tech led the computational modeling for the research.

3D printing 52

3D printing Additive manufacturing Aerospace Manufacturing 52

Control Engineering

SEPTEMBER 3, 2023

CLARI is still in its infancy, added Kaushik Jayaram, co-author of the study and an assistant professor of mechanical engineering at CU Boulder. “It has a modular design, which means it’s very easy to customize and add more legs,” Kabutz said. Eventually, we’d like to build an eight-legged, spider-style robot that could walk over a web.”

Robotics 52

Robotics Robotics Fit Form 52

Control Engineering

JUNE 5, 2023

Our benchmark is a first step towards enabling robots to master these skills, benefiting households and workplaces alike,” said visiting researcher at MIT CSAIL and research scientist at the MIT-IBM Watson AI Lab Chuang Gan, the senior author on a new paper about the research.

Robotics 52

Robotics Robotics Artificial Intelligence Benchmarking 52

Control Engineering

DECEMBER 15, 2022

Our technique uses embroidery, which is pretty simple – you can stitch our yarns directly on the fabric,” said the study’s lead author Rong Yin , assistant professor of textile engineering, chemistry and science at North Carolina State University. The technique offers a low-cost, potentially scalable method for making wearable devices.

Electronics 52

Electronics Prototype  Function Discrete manufacturing 52

Control Engineering

SEPTEMBER 28, 2022

A manufacturer can incur overhead costs if the local authorities having jurisdiction (AHJ) identify unapproved panels in the market. – Edited from an Insight Partners press release by CFE Media. For example, ECPs in the US must adhere to NEC Article 409, section 110.3(B), B), and ANSI/NFPA 70. CONSIDER THIS.

Industry 4.0 52

Industry 4.0 Industry 4.0 Automation Compliance 52