Mold Making Technology

APRIL 29, 2025

From 3D printing to mold simulation, April covered many topics this month. We know it can be hard to stay up to date on all things moldmaking, so here are the top articles that you may have missed or may want to read again. Read Now Source: American Injection Molding (AIM) Institute 8. Read Now 9. Read Now 6. Read Now 3.

3D printing 87

3D printing Sourcing Additive manufacturing Form 87

Mold Making Technology

APRIL 10, 2025

Managing thermal expansion differences is crucial in high-temperature injection molding. Steel guide pins and bushings expand less than the surrounding aluminum mold, risking misalignment and mold damage. Among the other answers quoted as a response was, “Sir, I did not fail 1,000 times. .”

Prototype  52

Prototype  Fit Sourcing 52

Mold Making Technology

JANUARY 30, 2025

Murphy Forsyth, MMT EAB member and Zero Tolerance general manager and processing engineer shares her top article picks. Source | Zero Tolerance Murphy Forsyth is the injection molding general manager at Zero Tolerance , a rapidly growing plastic injection mold machine shop located in Clinton Township, Michigan.

3D printing 52

3D printing Cycle time Prototype  Function 52

Mold Making Technology

APRIL 25, 2023

Helmut Mueller, president, Helm Tool Company: Since 1977, Helm Tool has worked hard to take mold manufacturing to a higher standard. We are widely known for building cutlery molds of any size and combination, but we also build tooling for the automotive, electrical, electronics, medical, optical, consumer goods and recreational markets.

Prototype  98

Prototype  Consumer Goods Bottleneck Electronics 98

Fabricating & Metal Work

JULY 23, 2023

This article is dedicated to: Hall D– METALFORM, Finishing, Tube & Pipe New Incremental Forming Simulation Software Booth D41130 LogoPress ProgSim performs accurate simulations of forming processes using incremental simulation technology powered by the industry proven AutoForm solver.

Form 52

Form Automation Robotics Robotics 52

Foley

JULY 11, 2023

Manufacturers are no longer focused on figuring out when things will return to “normal.” ” Instead, they are applying lessons learned from the past few years to evolve their operations to succeed in this “new normal.” Miller | vmiller@foley.com Nicholas J.

Manufacturing 40

Manufacturing Compliance Supply Chain Form 40