i4.0 today

SEPTEMBER 5, 2022

The Manufacturing & Supply Chain Conference & Exhibition , which is being held at the SEC Glasgow on the 13 th October 2022, will serve as a national forum for manufacturers and operators involved throughout the associated supply chains from across Scotland to gather to discuss pressing issues facing the industry. Inspire 3D.

Supply Chain 97

Supply Chain 3D printing Manufacturing Industry 4.0 97

i4.0 today

JANUARY 9, 2024

Could 2024 be the year that UK manufacturers finally embrace robotics? After trailing behind our international counterparts for years, the UK is now starting to catch up when it comes to the installation of industrial robotics.

Automation 52

Automation Robotics Robotics Function 52

i4.0 today

FEBRUARY 22, 2023

The global robot vision system market is likely at US$ 2,690.4 In order to improve job efficiency and replace human labour, the market for robots is rising and is anticipated to rise more during the coming year. However the specific uses depend on the type of vehicle or model being manufactured. million by 2033.

Robotics 52

Robotics Robotics Automotive Warehousing 52

i4.0 today

APRIL 21, 2023

A highly flexible ABB robot is helping a major UK chemicals company produce accurate laser welds on chemical production equipment. The end user was keen to solve logistical challenges by bringing the welding of the product in house from a European sub-contractor. seconds for a four-meter length.

Robotics 52

Robotics Robotics Automation Logistics 52

Robotics Business Review

FEBRUARY 8, 2024

Credit: MassRobotics BOSTON — During its annual partner celebration last night, MassRobotics introduced the 10 robotics startups chosen to participate in its inaugural equity-free accelerator. ” Tye Brady, chief technologist at Amazon Robotics, helped kick off the introduction of the 10 robotics startups.

Apparel 96

Apparel Robotics Robotics Prototype  96

i4.0 today

FEBRUARY 29, 2024

British Automation & Robot Association (BARA), organisers of Automation UK, are excited to announce the opening of visitor registration for this year’s event. The primary objective of Automation UK is to emphasise the importance of automation and robotics to the growth of the UK economy.

Automation 52

Automation Robotics Robotics Logistics 52

Manufacturer's Monthly

AUGUST 3, 2022

The Australian Manufacturing Week was a week of celebrating and highlighting the full spectrum of industry. There was a buzz of activity on all four days of the Australian Manufacturing Week in Sydney’s International Convention Centre. This has affected workforces, logistics and shipping of stock, well, everywhere.

Manufacturing 116

Manufacturing Advanced manufacturing Logistics Aerospace 116

i4.0 today

JANUARY 30, 2023

The global Industrial robot market is likely at US$ 17,925 million in 2023 and expected to grow at a CAGR of 12.1% Robot market is emerging and also expected to witness greater growth over the forecast year as to increase the efficiency of work and replace human labor. during the forecast years of 2023-2033. and reach US$ 56,171.4

Robotics 52

Robotics Robotics 3D printing Warehousing 52

Modern Machine Shop

DECEMBER 6, 2022

BI-MU 2022 occupied four exhibition halls at Fiera Milano, with five pavilions: RobotHeart, Metrology and Testing, BI-MU Logistics, BI-MU Digital and piùAdditive. Automation at the Robot and Beyond. Demand for robots and automation equipment is increasing in Italy, just as it is across the globe.

Automation 97

Automation Robotics Robotics 3D printing 97

Fabricating & Metal Work

APRIL 24, 2024

Davi, the world’s largest manufacturer of rolling and bending technology, will feature its revolutionary fully electric e-POWER plate roll machine at the Dallas Tech Expo, May 14 – 16, 2024, in Dallas, Texas, presented by Capital Machine Technology (CMT). The expo runs from 9 a.m. –

Cycle time 52

Cycle time Logistics Robotics Robotics 52

Fabricating & Metal Work

JULY 23, 2023

3D/Additive Manufacturing, Forming & Fabricating Fabricating & Metalworking is proud to present the FABTECH 2023 Product Showcase, which is an invaluable guide to navigating the trade show floor at McCormick Place in Chicago this September. Buena Park, CA) will introduce the new EGB 1303 ARse bending robot at Booth A1304.

Additive manufacturing 98

Additive manufacturing Form Manufacturing Automation 98

HGR Inc.

NOVEMBER 11, 2022

Manufacturing Faces Challenges to Maintain Growth, Deloitte Says. Manufacturing is confronting challenges to maintaining economic expansion, consulting firm Deloitte said in a report. Respondents were in industries including machinery, electrical equipment, aerospace, and automotive. Higher mortgage rates have depressed sales.

Manufacturing 79

Manufacturing Supply Chain Artificial Intelligence Electronics 79

i4.0 today

JANUARY 15, 2024

The conference has a reputation for attracting an array of businesses, the top five visitor company types in 2023 were OEM, vision solutions provider, end user, machine vision manufacturer and distributor, and academic.

Warehousing 52

Warehousing Pharmaceutical Aerospace Robotics 52

i4.0 today

JANUARY 15, 2024

The show provided an opportunity for exhibitors to showcase their latest innovations in automation and robotics to a wide range of visitors. The show’s prime purpose is to promote the importance of automation and robotics to the future growth of the UK economy. So, the quality of the visitors is what has really sold the show to me.”

Automation 52

Automation Robotics Robotics Logistics 52

i4.0 today

OCTOBER 6, 2022

The Manufacturing & Supply Chain Conference & Exhibition, which is being held at the SEC Glasgow on Thursday, 13th of October 2022, will be the largest event of its kind in Scotland. Impressive Line-up of Speakers.

Supply Chain 52

Supply Chain Industry 4.0 Industry 4.0 3D printing 52

Frost & Sullivan Manufacturing

NOVEMBER 20, 2022

KSA logistics scenario. The largest economy amongst the Gulf Cooperation Council members, Saudi Arabia, is striving to position itself as the logistics hub of the region with its Vision 2030 initiatives, driving growth in the logistics sector. Under Vision 2030. Global Supply Chain Resilience Initiative.

Supply Chain 52

Supply Chain Logistics Freight Artificial Intelligence 52

Frost & Sullivan Manufacturing

NOVEMBER 20, 2022

KSA logistics scenario. The largest economy amongst the Gulf Cooperation Council members, Saudi Arabia, is striving to position itself as the logistics hub of the region with its Vision 2030 initiatives, driving growth in the logistics sector. Under Vision 2030. Global Supply Chain Resilience Initiative.

Supply Chain 52

Supply Chain Logistics Freight Artificial Intelligence 52

Breathe Technologies

MAY 23, 2022

Further strengthening our team with a high-profile Director and robotics specialist. A former board Director of KNAPP UK, Phil has over 30 years’ experience, having also held senior positions at Vanderlande, Wincanton, Christian Salvesen and Clipper Logistics.

Logistics 52

Logistics Robotics Robotics Automation 52

Fastener News Desk

NOVEMBER 8, 2022

Linear ball screws are widely utilized in a variety of industries: from warehouse logistics robots and automotive power steering to aircraft aileron actuators — or even semiconductor wafer processing equipment stages. Tier 3 Aerospace Manufacturer. Tier 3 Aerospace Manufacturer. Lead Engineer. The Solution.

3D printing 52

3D printing Aerospace Prototype  Additive manufacturing 52

Manufacturer's Monthly

JULY 10, 2023

During more than two decades with CSIRO I’ve witnessed and been part of numerous digital innovations across Australian manufacturing and other industries. Robotics and automation are central to Industry 4.0 Robotics and automation are central to Industry 4.0 ROS is applied in scientific, industrial, and aerospace domains.

Automation 75

Automation Robotics Robotics Industry 4.0 75

21st Century Tech

JULY 1, 2022

Dijam Panigrahi is the co-founder and COO of GridRaster, an augmented reality (AR) software developer that today works with aerospace, automobile and military clients. It could be a metaverse that lets humans work through robots in remote places like Mars or the Moon, or on a factory floor, skunkworks, or design studio.”

Prototype  68

Prototype  Rapid prototyping Robotics Robotics 68

Fastener News Desk

OCTOBER 13, 2023

Our extensive logistics network operates in the Canada, USA, the United Kingdom, Germany, Poland, Romania, France, Turkey and China. Thanks to our sales and logistics centers in Germany, Romania, Poland, France, USA, Canada and resident engineers in UK and China we are able to give uninterrupted service to our business partners.

Logistics 59

Logistics Supply Chain Lead Time Additive manufacturing 59

Manufacturer's Monthly

APRIL 19, 2023

Manufacturers’ Monthly sits down with co-founder and CEO Andrew Uscinski to discuss the company’s growth and aspirations in the burgeoning Australian space industry. The team of three are mechanical and aerospace engineers who met at the University of Queensland and started the company in 2020 while they were still students. “We

3D printing 111

3D printing Aerospace Supply Chain Prototype  111

i4.0 today

JULY 26, 2022

One of the UK’s largest material handling and storage companies, Middlesex based, Flowstore Systems has this month announced the full opening of their new manufacturing facility in Belgium as the company continues its rapid growth plans to become the largest of its type in Europe. flowstore.co.uk/.

Aerospace 52

Aerospace Automotive Form Robotics 52

Additive Manufacturing

JULY 20, 2022

Made possible through Relativity’s proprietary 3D printing process and exotic materials, Terran R features unique design geometries that are not possible to achieve in traditional manufacturing, driving exponential innovation and disruption in the industry.

3D printing 98

3D printing Supply Chain Logistics Aerospace 98

Manufacturer's Monthly

AUGUST 3, 2022

At Land Forces 2022 Milspec Manufacturing will reprise its “Power Solutions for Vehicles and Field Applications”, while the Office of Defence Industry Support (ODIS) will detail how this “one stop shop” government agency can lead individual companies through the maze of Defence engagement, assistance and opportunities.

Artificial Intelligence 98

Artificial Intelligence Sourcing Supply Chain Prototype  98

E&T

AUGUST 23, 2022

Shenzhen-based company DJI is the top manufacturer of commercial drones, with an estimated market share of around 70 per cent, according to Drone Industry Insights. and reach the goal of becoming a global civil aviation power," a representative from the aviation authority said. per cent) and China's Yuneec (3.6 tonnes (1,360kg).

Aerospace 75

Aerospace Electronics Robotics Robotics 75

Dinesh Mishra

JANUARY 30, 2023

India is among the world’s biggest metal-cutting machine tools markets, with sectors like automotive, general engineering, energy, and aerospace being the major demand drivers. HSTEC specializes in the development, manufacture, and repair of high-speed motor spindles and fixtures.

Industry 4.0 52

Industry 4.0 Industry 4.0 Aerospace Automotive 52

Control Engineering

MARCH 29, 2023

TIE is a leading provider of refurbished parts and repair services, specializing in computer numerical control (“CNC”) systems and robotics. 3/15/23 Clarapath, a New York-based medical robotics company, acquired Crosscope, a Mountain View, CA-based digital pathology company. Headquartered in LaVergne, Tenn., Learn more. Learn more.

Automation 52

Automation Electronic Design Automation (EDA) Beverage Robotics 52

Fabricating & Metal Work

JANUARY 22, 2024

is the North American branch of the Davi Group, which is the world’s largest manufacturer of plate rolls, angle rolls, high productivity lines and customized rolling machines. There are also four logistics warehouses in North America, including one in Phoenix. In the United States, Davi Inc. The company’s U.S. in width to 0.25-to-15.75”

Automation 52

Automation Function Robotics Robotics 52

Control Engineering

NOVEMBER 6, 2023

Sustainable manufacturing initiatives Barry Turner, technical business development manager at Red Lion, concurs. It will enable hyper-personalization in manufacturing, where products can be tailored to individual preferences at scale. This can result in shorter times-to-market and better operational effectiveness.

Supply Chain 52

Supply Chain Value chain Automation Artificial Intelligence 52

Fabricating & Metal Work

OCTOBER 2, 2022

Pavilions are dedicated to 3D/additive manufacturing; finishing; forming & fabricating; METALFORM; robotics & industrial automation; tube & pipe; welding; and welding automation. The modular Connected Shop platform includes scheduling, logistics, and ERP/MRP connection informed by nesting intelligence.

Automation 52

Automation Form Robotics Robotics 52