Manufacturing Tomorrow

JUNE 6, 2025

Advanced Manufacturing and Factory Automation Login Partner Login If you do not have a ManufacturingTomorrow partner account, please register - its free! Visit www.aras.com to learn more and follow us on YouTube, X, Facebook, and LinkedIn.

Supply Chain 52

Supply Chain Automation Bill of Materials 3D printing 52

Canadian Manufacturing

JULY 10, 2024

TRANSTEX acquires US Liner Company to expand manufacturing capacity (CNW Group/TRANSTEX) MONTREAL — TRANSTEX acquires Pennsylvania-based US Liner Company, a manufacturer of fibre-reinforced thermoplastic composites widely used as protective or structural components in vehicles, recreational vehicles, and agricultural applications.

Composites 59

Composites Supply Chain Advanced manufacturing Sourcing 59

Manufacturer's Monthly

MARCH 14, 2023

The Aerostructures Innovation Research Hub, aka AIR Hub , is moving the needle in aerospace research for Australia using advanced composite materials to design and produce innovative aerostructures. Boeing’s presence in Australia also led to significant benefits, as Adriano Di Pietro, Director of AIR Hub explained.

Aerospace 90

Aerospace Composites Prototype  Industry 4.0 90

Modern Machine Shop

JANUARY 29, 2023

The ability to process multiple materials at once to vary alloy composition and functionally grade an AM component opens up entirely new realms for designers to engineer superior parts and products. The material freedoms of AM have long been overshadowed by the focus on design freedom, but that is certain to change in the near future.

3D printing 105

3D printing Supply Chain Artificial Intelligence Aerospace 105

Canadian Manufacturing

APRIL 27, 2023

This round of funding will enable us to commercialize our line of hemp-based, advanced bio-composites for Toyota North America, Winnebago Industries and Gurit as well as to move forward with construction of our hemp fibre processing facility in Western Canada.

Composites 59

Composites Supply Chain Automotive Manufacturing 59

Canadian Manufacturing

MAY 21, 2024

The initial planning and market assessment phases will focus on: Composites, plastics and resins (including bottling): HydroGraph’s graphene has been shown to increase the yield strength by over 18% and increase breakage strength by over 100%.

Composites 105

Composites Manufacturing Supply Chain Advanced manufacturing 105

i4.0 today

JULY 24, 2024

At this year’s Advanced Engineering UK , held at the NEC, Birmingham on October 30 and 31, businesses servicing the aerospace supply chain will have the opportunity to meet with buyers from the sector’s leading original equipment manufacturers (OEMs).

Aerospace 59

Aerospace Supply Chain Composites Form 59

Cisco Smart Manufacturing

JUNE 21, 2018

There is no one size fits all view when it comes to manufacturing. Large, advanced plants are using a plethora of advanced manufacturing processes, robots and data as a core part of their operations. Supply chain relationships. New materials/composites. Advanced process control.

Supply Chain 52

Supply Chain Manufacturing Rapid prototyping Smart manufacturing 52

i4.0 today

DECEMBER 5, 2024

MACH 2026, the UK’s premier manufacturing and engineering exhibition, has already secured more than 65% of its floorplan, 16 months ahead of the event. MACH represents much more than an opportunity to invest in new technologies; it provides a comprehensive platform to explore the depth and breadth of the UK’s manufacturing sector.

Manufacturing 52

Manufacturing Supply Chain Composites Automation 52

Dinesh Mishra

JANUARY 22, 2025

Advanced Tool Materials : High-performance coatings like diamond-like carbon (DLC) and ceramic composites enhance tool lifespan and machining accuracy. 2) How is the industry adapting to sustainable manufacturing practices, and what specific initiatives are helping to reduce environmental impact?

Industry 4.0 52

Industry 4.0 Industry 4.0 Supply Chain Smart manufacturing 52

Manufacturer's Monthly

JUNE 2, 2024

Being able to achieve that at scale with infrastructure projects and large commercial buildings is complex and requires creative problem-solving and supply chain management. Advanced manufacturing and innovative design Oliver and the team have helped transform many spaces in the community with the ARIAMESH range.

Manufacturing 98

Manufacturing Supply Chain Sourcing Form 98

Canadian Manufacturing

JULY 17, 2024

announced that it has completed the establishment of two new Composite Technologies manufacturing sites. The added scale and modernized footprint is expected to contribute to margin expansion for the Composite Technologies segment over time.” TORONTO — Mattr Corp.

Composites 52

Composites Automation Manufacturing Supply Chain 52

Manufacturer's Monthly

AUGUST 15, 2022

Titomic provides a complementary advanced manufacturing ability,” Koeck said. Spraying metal on metal can achieve and deliver certain services which are innovative for more traditional manufacturing.”.

3D printing 97

3D printing Additive manufacturing Aerospace Lead Time 97

Canadian Manufacturing

MARCH 1, 2023

is receiving a $5 million repayable contribution to transition its facilities to manufacture complex and high-quality structural EV parts like body structure and battery support components. Their eco-friendly parts are also helping original manufacturers in the supply chain reduce their impact on the environment.

Manufacturing 40

Manufacturing Supply Chain Composites Automotive 40

Manufacturer's Monthly

NOVEMBER 28, 2022

Most of Australia’s accelerators aren’t focused on traditional manufacturing or advanced manufacturing – there’s a heavy bias towards app development software.”. Dielenberg spent 7 years working in Europe where he noticed the development of co-working spaces that focused on creative manufacturing.

3D printing 98

3D printing Prototype  Advanced manufacturing Manufacturing 98

Mold Making Technology

APRIL 3, 2024

Today molders, moldmakers and OEMs alike are turning to this layer-by-layer production technology to save time, serve new markets and even fill supply chain gaps. But keep an eye out for promising developments and applications across the show floor, including: 1.

3D printing 64

3D printing Prototype  Rapid prototyping Supply Chain 64

i4.0 today

NOVEMBER 16, 2023

This year, the distinguished composites zone, in partnership with Composites UK, attracted high quality visitors and exhibitors proving itself as the go-to place for the UK’s leading composites sector. Here, high quality visitors and exhibitors were actively seeking the latest innovations in composite materials.

Composites 52

Composites Aerospace Supply Chain Manufacturing 52

Canadian Manufacturing

AUGUST 11, 2023

The mission, which began its orbit of the moon on August 5, 2023, consists of a safe, soft landing on the moon and exploration of the moon’s surface with the rover to better understand its composition through experiments and observation.

Composites 66

Composites Supply Chain Advanced manufacturing Electronics 66

i4.0 today

MAY 7, 2024

On October 30 and 31, 2024, Advanced Engineering UK will return to the NEC, Birmingham showcasing more innovation from the manufacturing and engineering industry. With six months to go, the halls are quickly filling up as businesses from across the entire supply chain race to secure a spot.

Supply Chain 52

Supply Chain Composites Manufacturing Industry 4.0 52

ATS

JUNE 18, 2019

technologies are creating a “ smart supply chain ” awash with data, and quantum computing may be the only way to optimize the movement of materials and products. If the manufacturing industry is to take advantage of the potential of quantum computing in advanced manufacturing, education and planning must start today.

Manufacturing 52

Manufacturing Supply Chain Industry 4.0 Industry 4.0 52

Canadian Manufacturing

NOVEMBER 21, 2024

.” While traditional air conditioners and dehumidifiers rely on energy-hungry condensers to remove moisture, Evercloak’s technology uses proprietary graphene oxide-composite membranes that let water molecules pass through while blocking air molecules.

Composites 52

Composites Fit Supply Chain Advanced manufacturing 52

Canadian Manufacturing

JULY 16, 2024

The use of this Black Swan GEM can enhance impact resistance by approximately 20%; GEM S24M, also for use in Polypropylene, improves tensile properties typically in fibre applications, often used in textiles, ropes and composites; GEM D26M improves tensile properties of Polyamide Nylon 6, a versatile engineering plastic used in automotive under-hood (..)

Consumer Goods 52

Consumer Goods Composites Automotive Lead Time 52

Canadian Manufacturing

JANUARY 15, 2025

Cymat is contributing its previously developed composite solution for lightweight underside impact protection for an EV battery box. This component, originally developed and independently lab-tested for another EV OEM, incorporates an advanced stabilized aluminum foam sandwich structure featuring a version of its SmartMetal(TM).

Automotive 52

Automotive Manufacturing Function Composites 52

Canadian Manufacturing

JANUARY 19, 2024

In the form of belts, disks, sheets, rolls, and brushes, they are for the industrial market and are used to treat wood, bodywork, metal, and composite materials. CED’s support in acquiring and installing manufacturing equipment will enable the business to improve its productivity and production capacity, in order to boost its growth.

Composites 52

Composites Form Manufacturing Supply Chain 52

Canadian Manufacturing

NOVEMBER 22, 2023

NanoXplore has secured key suppliers, ensuring a robust supply chain for the main equipment. The technology finds potential applications in batteries and lightweight composites, enhancing its appeal in cutting-edge industries. The Corporation is planning to start purchasing the equipment during 2024 calendar year.

Manufacturing 40

Manufacturing Supply Chain Composites Lead Time 40

Canadian Manufacturing

FEBRUARY 22, 2024

We plan to widen our product line in the metal transformation and composite sectors in the near future. Our autonomous sanding robots are already disrupting the cabinet manufacturing industry by allowing companies counting as few as six people to automate one of the hardest tasks in their shop successfully.

Robotics 52

Robotics Robotics Composites Automation 52

Canadian Manufacturing

JANUARY 11, 2024

a low-cost silicon anode materials developer that enables longer-running lithium-ion batteries, announces that the Company has filed the 9th patent regarding a significant development in the silicon anode manufacturing process. TORONTO — NEO Battery Materials Ltd.,

Composites 40

Composites Automotive Manufacturing Supply Chain 40

Canadian Manufacturing

NOVEMBER 16, 2022

Specifically, Xu was accused by the government of trying to steal technology related to GE Aviation’s composite aircraft engine fan, unduplicated by other companies, to benefit the Chinese government.

Aerospace 40

Aerospace Composites Supply Chain Advanced manufacturing 40

Mold Making Technology

JANUARY 26, 2023

A recent development project evaluated the feasibility of using wire-arc additive manufacturing (WAAM) to produce layup tooling for complex contoured winglets mounted at the tips of the wings of MQ-9B SkyGuardian and SeaGuardian (shown above) remotely piloted aircraft from General Atomics Aeronautical Systems Inc.

Composites 52

Composites 3D printing Cycle time Lead Time 52

i4.0 today

NOVEMBER 27, 2024

The exhibiting companies included representatives from Atlas Copco, Optimas, Airtech Advanced Materials and RS Group. Several leading industry associations also had a presence, such as Composites UK, Innovate UK, the GTMA and the National Composites Centre.

Composites 52

Composites Aerospace Supply Chain Automotive 52

i4.0 today

NOVEMBER 12, 2024

The exhibiting companies included representatives from Atlas Copco, Optimas, Airtech Advanced Materials and RS Group. Several leading industry associations also had a presence, such as Composites UK, Innovate UK, the GTMA and the National Composites Centre.

Composites 52

Composites Aerospace Supply Chain Automotive 52

Dinesh Mishra

SEPTEMBER 22, 2024

The recent trends in the CNC machine tool industry include the integration of additive manufacturing (3D printing) with CNC machining, enabling hybrid processes that combine both subtractive and additive methods. There is a growing need for skilled technicians and engineers who are proficient in advanced manufacturing technologies.

Supply Chain 52

Supply Chain 3D printing Automation Industry 4.0 52

i4.0 today

AUGUST 16, 2024

The next speaker Matthew Atkinson, lead research engineer at Jaguar Land Rover, is an expert in automotive engineering, specialising in replacing metallic structures with injection moulded composites. supply chain management and sustainability. The full speaker program will be announced soon.

Supply Chain 52

Supply Chain Industry 4.0 Industry 4.0 Digital manufacturing 52

Robotics Business Review

FEBRUARY 10, 2025

The SAEKI team with its on-demand additive manufacturing robot. Source: SAEKI Global supply chains are under increasing pressure, and manufacturing costs continue to rise. SAEKI, a manufacturing automation business, announced a $6.7M funding round to tackle these challenges with its digital manufacturing approach.

Robotics 69

Robotics Robotics 3D printing Manufacturing 69

i4.0 today

APRIL 16, 2025

This popular zone connects smaller organisations with valuable networking opportunities across booming sectors such as automotive, aerospace, composites and Industry 4.0. This IoT device automates the monitoring and control of vacuum pumps, preventing leaks and thermal runaway in composite manufacturing.

Composites 52

Composites Industry 4.0 Industry 4.0 Supply Chain 52

i4.0 today

MARCH 10, 2025

Advanced Engineering UK is set to return to the NEC, Birmingham, on October 29 and 30, 2025, showcasing the latest innovations from the manufacturing and engineering sectors. With eight months remaining, the exhibition halls are filling up as companies across the supply chain secure their spots.

Supply Chain 52

Supply Chain Composites Additive manufacturing Manufacturing 52

i4.0 today

FEBRUARY 5, 2025

With global supply chains facing mounting pressures and costs continuing to rise, manufacturing is at a critical juncture. Industries like aerospace, automotive, and construction face long lead times and high costs for large-format components, relying heavily on fragmented supply chains and labor-intensive processes.

Manufacturing 59

Manufacturing 3D printing Supply Chain Aerospace 59