Modern Machine Shop

JULY 21, 2024

is showcasing its complete portfolio of design and make products, including the release of Autodesk Fusion, a cloud-enabled software for designers and manufacturers. This year alone, there have been eight major releases of Fusion, delivering over 50 custom manufacturing features and 1,500+ improvements. Autodesk Inc.

Cycle time 115

Cycle time Additive manufacturing Sourcing Manufacturing 115

Mold Making Technology

JUNE 18, 2025

Source | Shutterstock As the labor gap persists, automation is an increasingly attractive option for many mold manufacturers. Beyond addressing labor shortages, automation can speed up production time, lower manufacturing costs for high-volume production runs, and improve accuracy and repeatability of individual components.

Robotics 52

Robotics Robotics Prototype  Cycle time 52

Gary Mintchell

MAY 20, 2024

The post Automate Report 4: Festo Introduces Several New Products appeared first on The Manufacturing Connection.

Automation 147

Automation 3D printing Cycle time Additive manufacturing 147

Additive Manufacturing

APRIL 13, 2023

AddUp, global metal additive manufacturing OEM, is excited to officially open the doors to their new Tooling Competence Centre in Aachen, Germany. AddUp specializes in two types of additive manufacturing (AM) technologies: Powder Bed Fusion (PBF) and Directed Energy Deposition (DED).

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Cycle time 52

Additive Manufacturing

JULY 28, 2022

Combining cutting-edge technology with additive manufacturing redefines the limits set within traditional manufacturing and delivers innovation in places you might not expect. Additive manufacturing (AM), more commonly known as 3D printing, is an innovative process where objects are created one layer at a time.

3D printing 98

3D printing Additive manufacturing Cycle time Supply Chain 98

AU Manufacturing

APRIL 18, 2023

Germany-headquartered Dimensionics Density has commercially introduced an automated density determination technology for additive manufacturing (AM) , with a particular focus on the validation of AM parts. The post Dimensionics unveils density determination tech for 3D-printed parts appeared first on Australian Manufacturing.

3D printing 98

3D printing Cycle time Automation Additive manufacturing 98

Modern Machine Shop

NOVEMBER 24, 2022

Keselowski Advanced Manufacturing (KAM) knows this perhaps a little too well — one sealing groove on a turbo pump assembly proved complicated enough to consist of 30% of the part’s CAM programming tree and required multiple operations with high tool wear, but the high costs of failure discouraged experimentation. Material Matters.

3D printing 105

3D printing Cycle time Bottleneck Additive manufacturing 105

Manufacturer's Monthly

NOVEMBER 2, 2022

As the market leader in pellet-based polymer extrusion 3D printing technology, and the only manufacturer offering hybrid tool head configurations, Titan Robotics provides solutions to its customers by developing application-specific processes using Titan’s unique additive manufacturing (AM) technology.

3D printing 98

3D printing Robotics Robotics Form 98

Modern Machine Shop

OCTOBER 12, 2023

The company recently brought several of its brands, including Toyoda and its automotive component manufacturing group, under the JTEKT name in a move that’s meant to reduce confusion and highlight synergies. Traditional gearmaking requires multiple processes, and combining them into one platform can improve cycle times and part quality.

Automotive 98

Automotive Cycle time Automation Form 98

Fabricating & Metal Work

APRIL 22, 2025

This level of precision is indispensable in sectors such as aerospace, where advanced materials and accuracy are required for the manufacture of engine components and other critical parts, and in the medical field, where high-accuracy production of implants and surgical tools is essential. MTC control and monitoring panel.

Made-to-spec 52

Made-to-spec Cycle time Form Aerospace 52

Mold Making Technology

APRIL 13, 2023

Photo Credit: Next Chapter Manufacturing Looking over the vast landscape of additive manufacturing (AM) technologies, the various material options and the number of experts in the market can leave you more confused than ever. Conformal cooling is also integrated into the mold for consistent cooling and faster cycle time.

3D printing 98

3D printing Cycle time Additive manufacturing Lead Time 98

Modern Machine Shop

MARCH 6, 2025

A subsidiary based in Germany is focused on operating the Metal Powder Application (MPA) process, a hybrid manufacturing strategy that combines five-axis milling with cold spray deposition. The process supports the precise addition of material, such as conformal copper areas added to injection mold tooling to improve cycle times.

3D printing 59

3D printing Cycle time Function Additive manufacturing 59

Additive Manufacturing

DECEMBER 4, 2022

According to Sigma’s General Manager of European Operations Stephan Kuehr, “This is a great step in allowing us to support customer quality at every point of their additive journey, as well as better integrate with other software solutions. We share their mission of providing high levels of manufacturing quality and economic sustainability.

3D printing 52

3D printing Additive manufacturing Cycle time Form 52

Dinesh Mishra

NOVEMBER 28, 2024

Turning is a foundational process in machining, integral to manufacturing precision components that meet the rigorous demands of various industries. The lathe’s ability to rotate the workpiece allows for precise shaping and finishing, making turning one of the most widely used processes in manufacturing.

Aerospace 52

Aerospace Automotive Electronics Function 52

Mold Making Technology

MAY 12, 2025

This integrated approach was developed for injection mold tooling and is said to significantly reduce lead times, costs and labor to empower moldmakers with even more efficiency and precision. Also, integrating conformal cooling channels enhances thermal management, reduces cycle times and improves part quality.

Lead Time 52

Lead Time Automation 3D printing Cycle time 52

Modern Machine Shop

MARCH 5, 2024

Source: Renishaw Renishaw’s Tempus technology enables users of its additive manufacturing (AM) systems to achieve significantly higher productivity, with no reduction in part quality. Over the cycle time of the build, the time savings can cut the build time by up to 50% with no reduction in part quality.

Cycle time 52

Cycle time Additive manufacturing Sourcing Manufacturing 52

Mold Making Technology

APRIL 8, 2025

Conformal cooling is one of additive manufacturing’s well-known applications, where the technology’s geometric capabilities can enable the precise placement of cooling channels throughout an injection mold. More than 3,500 manufacturing professionals gathered at the Donald E.

3D printing 52

3D printing Additive manufacturing Sourcing Cycle time 52

Mold Making Technology

JUNE 19, 2024

The design freedom of polymer/composite additive manufacturing (AM) makes it easy to design different front-facing/insert holding (middle left and right) and rear-facing/handle versions (right) of the claw manual end-of-arm tooling (EOAT) that Zero Tolerance LLC has produced for its own and customer molding operations.

3D printing 52

3D printing Manufacturing Composites Prototype  52

Mold Making Technology

DECEMBER 17, 2023

Large Hybrid Steel Insert Solves Deformation, Dimensionality, Cycle Time Problems Linear AMS , a company that originated in 2003 as a toolmaker and molder, swiftly adopted metal additive manufacturing (AM) early in its journey. Read the full article. Read the full article.

Bottleneck 98

Bottleneck Cycle time Automation Aerospace 98

i4.0 today

OCTOBER 18, 2022

Composite-based additive manufacturing appears to be on the verge of breaking through as a ‘mainstream’ method of production, according to a new report on disruptive 3D printing technologies. The potential for manufacturers to expand their offering and branch out into new areas is clear.

3D printing 52

3D printing Composites Additive manufacturing Cycle time 52

i4.0 today

SEPTEMBER 23, 2022

Composite-based additive manufacturing appears to be on the verge of breaking through as a ‘mainstream’ method of production, according to a new report on disruptive 3D printing technologies. The potential for manufacturers to expand their offering and branch out into new areas is clear.

3D printing 52

3D printing Composites Additive manufacturing Cycle time 52

i4.0 today

SEPTEMBER 25, 2024

By hard coating the raw brake discs with resilient steel and composite materials, the solution will enable Stellantis to significantly increase brake disc durability, reducing emissions pollution by up to 80%; all while keeping cycle times at a minimum.

Automation 52

Automation Robotics Robotics Additive manufacturing 52

Additive Manufacturing

JANUARY 20, 2023

Department of Defense are accelerating the use of additive manufacturing to reduce long lead cycle times and to produce large volumes of complex parts for advanced weapons systems. Only 20%-40% of titanium powder used in additive manufacturing ends up in fabricated parts. Air Force and U.S.

Additive manufacturing 52

Additive manufacturing Cycle time Sourcing Aerospace 52

Modern Machine Shop

DECEMBER 19, 2024

Ulendo is an Ann Arbor, Michigan-based startup that produces software solutions for manufacturing automation. He describes one use case where an automotive manufacturer was using robots mounted with cameras to complete visual inspection tasks. Longer cycle times can mean significant losses in productivity.

Robotics 75

Robotics Robotics Cycle time 3D printing 75

i4.0 today

NOVEMBER 14, 2023

More than just a seasonal stocking filler, this document is the ultimate manufacturing gift that keeps on giving. Reducing a 10 second dry cycle time by just 0.55 seconds, for instance, can equate to an additional 504 cycles daily (2,520 a week). Multiplied, this productivity improvement alone can add up to 14.3

Cycle time 52

Cycle time Automation 3D printing Manufacturing 52

Mold Making Technology

SEPTEMBER 11, 2023

The multi-material ExAM 255 3D printing system enables high build speeds for high-precision 3D components manufacture. Compared to a conventional approach in machining, the use of an additive manufacturing (AM) process to produce a MIM tool reduced the total production time from around eight weeks to approximately five days.

3D printing 52

3D printing Cycle time Function Composites 52

Modern Machine Shop

NOVEMBER 1, 2023

Over the past year, many manufacturers have eyed the recovering aerospace market as one potential avenue for expansion and diversification. In particular, companies with the right mix of experience and capabilities may find significant opportunity in the realm of blisk manufacturing. Click to view full-size image.

Aerospace 98

Aerospace Cycle time Manufacturing Supply Chain 98

Additive Manufacturing

SEPTEMBER 4, 2022

SLM Press Release – SLM enters into Investment Agreement with Nikon to further enhance SLM’s leadership position in Additive Manufacturing Nikon to launch all cash public takeover offer for SLM at EUR 20 per share, representing a premium of 75% to the undisturbed closing price as of September 1 st 2022 Key shareholders Elliott, ENA and Hans J.

3D printing 52

3D printing Additive manufacturing Digital manufacturing Aerospace 52

MEM

JULY 12, 2023

They are the global leader in high pressure technology and have over 2000 systems working worldwide in industries including aerospace, energy, medical implants, space, automotive, additive manufacturing, castings and food processing. “As It cements our position as the UK one-stop shop for component manufacturers.

Aerospace 52

Aerospace Additive manufacturing Cycle time Automotive 52

Frost & Sullivan Manufacturing

JUNE 30, 2022

Ravi added: “As 30% of the manufacturers are in the early stages of digital transformation, the impact of in-line metrology in manufacturing will be prominent in the next two to four years. In-line metrology solutions : Provide real-time quality control through in-line metrology equipment and advanced software.

Artificial Intelligence 52

Artificial Intelligence Cycle time Aerospace Automotive 52

Dinesh Mishra

JANUARY 22, 2025

Recent advancements transforming efficiency and precision include: High-Speed Machining : CNC machines with HSM capabilities deliver faster cutting speeds and tighter tolerances, significantly reducing cycle times. Flexible Manufacturing : Adopting modular designs for quick reconfiguration to meet diverse customer needs.

Industry 4.0 52

Industry 4.0 Industry 4.0 Supply Chain Smart manufacturing 52

Dinesh Mishra

AUGUST 17, 2022

The DEK TQ L offers electronics manufacturers new degrees of freedom for printing larger boards with dimensions of up to 600 x 510 millimeters – 90 percent more than the DEK TQ. Despite the increase in board size, the core cycle time maximum is only 6.5 What’s new about the DEK TQ L. Illustrations for downloading.

Electronics 98

Electronics Composites Automation Cycle time 98

Fabricating & Metal Work

DECEMBER 13, 2022

The solution is intelligent coatings, as can be applied to brake disks using our AM coating system” says Dr. Géza Koscsák – the Head of Additive Manufacturing at the CHIRON Group. With a cycle time for conventional brake disks of around 30 seconds per disk, it’s clear that the coating process needs to keep up” he adds.

Cycle time 52

Cycle time Additive manufacturing Form Manufacturing 52

Modern Machine Shop

APRIL 22, 2024

.” And incorporating artificial intelligence (AI) operators can do much more, including using AI in part design to determine how to make a part in the most profitable way — sometimes even going from subtractive to additive manufacturing, if they have that capability. Here are some of the highlights.

Automation 98

Automation Robotics Robotics Artificial Intelligence 98

Additive Manufacturing

MAY 19, 2023

In addition to today’s announcement, the company is providing further detail related to its previously announced initiative in February 2023 to improve manufacturing efficiencies in its European metal printer operations. This approach should improve cycle time from development to production while improving operating efficiencies.

3D printing 52

3D printing Additive manufacturing Cycle time Aerospace 52

Mold Making Technology

SEPTEMBER 13, 2023

Photo Credit: AMT Registration has officially opened for IMTS 2024 – The International Manufacturing Technology Show , taking place Sept. Eelman, chief experience officer, AMT – The Association For Manufacturing Technology , which owns and produces IMTS. 9-14 at McCormick Place in Chicago.

Manufacturing 52

Manufacturing Supply Chain 3D printing Warehousing 52

Fabricating & Metal Work

SEPTEMBER 30, 2024

3D printing, also known as additive manufacturing (AM), has long been promoted as a revolutionary technology poised to reshape the future of manufacturing. While 3D printing offers unique advantages, it is unlikely to replace traditional manufacturing entirely. One of the primary challenges is the speed of the process.

3D printing 52

3D printing Additive manufacturing Cycle time Manufacturing 52