Dinesh Mishra

JANUARY 30, 2023

MAKERS AND MOVERS: STRATASYS INDIA Makers and Movers 2023 started off to a scintillating start with a highly informative and engaging conversation between Rajiv Bajaj, the Managing Director of Stratasys India & SEA, and our editor on additive manufacturing and how it is transforming the manufacturing industry.

3D printing 52

3D printing Manufacturing Additive manufacturing Automotive 52

Additive Manufacturing

NOVEMBER 18, 2022

Ottawa, Ontario/November 17, 2022 — Aiming to improve the performance and productivity of metal additive manufacturing, Morf3D Inc. Headquartered in California, Morf3D specializes in the optimization of technology solutions for high volume additive manufacturing (AM), serving the space, aviation and defense markets.

3D printing 98

3D printing Additive manufacturing Aerospace Automotive 98

Manufacturer's Monthly

NOVEMBER 29, 2022

The expression “supply chain issues” is familiar to all Australians, from the manufacturer whose production line has stalled awaiting parts from an overseas supplier to the housewife walking past empty shelves in her local supermarket. The benefits of thinking outside the traditional manufacturing box can be seen all around the world.

Manufacturing 87

Manufacturing 3D printing Supply Chain Prototype  87

AU Manufacturing

NOVEMBER 24, 2022

The expression “supply chain issues” is familiar to all Australians, from the manufacturer whose production line has stalled awaiting parts from an overseas supplier to the housewife walking past empty shelves in her local supermarket. The benefits of thinking outside the traditional manufacturing box can be seen all around the world.

Supply Chain 69

Supply Chain Manufacturing 3D printing Prototype  69

Fastener News Desk

MARCH 31, 2023

The 28th annual report takes a deep dive into the growth of the additive manufacturing (AM) industry, with insights from 10 industry sectors. This year’s report takes a deep dive into the growth of the additive manufacturing (AM) industry, with insights from 10 industry sectors.

Additive manufacturing 52

Additive manufacturing Aerospace Sourcing Manufacturing 52

Additive Manufacturing

JULY 28, 2022

Combining cutting-edge technology with additive manufacturing redefines the limits set within traditional manufacturing and delivers innovation in places you might not expect. Additive manufacturing (AM), more commonly known as 3D printing, is an innovative process where objects are created one layer at a time.

3D printing 98

3D printing Additive manufacturing Cycle time Supply Chain 98

Modern Machine Shop

DECEMBER 28, 2023

The VOXLS 30 C 225, 30 C 320 and 30 C 450 models have maximum source energies of 225 kV, 320 kV and 450 kV, respectively, for examining parts of various densities and sizes. The systems are powered by Nikon’s X-ray source technology, including its specialized 225 kV Rotating.Target 2.0 and 450 kV reflection target.

Sourcing 59

Sourcing Pharmaceutical Aerospace Automotive 59

Fastener News Desk

MAY 1, 2024

.–( BUSINESS WIRE )– IperionX Limited (NASDAQ: IPX, ASX: IPX) and Vegas Fastener Manufacturing, LLC (Vegas Fastener) have agreed to partner to develop and manufacture titanium alloy fasteners and precision components with IperionX’s advanced titanium products. Pender, Associate Director U.S.

Aerospace 59

Aerospace Manufacturing Advanced manufacturing Additive manufacturing 59

Additive Manufacturing

NOVEMBER 9, 2022

. “Falling component costs are increasingly bringing additive manufacturing (AM) on a par economically with conventional manufacturing. TRUMPF is already using 3D printing in series production for its own parts manufacturing. Additive manufacturing of series parts has now arrived in many industries.

3D printing 52

3D printing Additive manufacturing Aerospace Automotive 52

i4.0 today

OCTOBER 27, 2022

stands for “Jetted Additively Manufactured Electronics Sources,” the authoritative leader in advancing the development of AME, announced today the giveaway of the most innovative software in electromagnetic (EM) and electronics simulation. The winner announcement will take place in December 2022. ames.com/Community/Events.

3D printing 52

3D printing Electronics Additive manufacturing Sourcing 52

Additive Manufacturing

JANUARY 20, 2023

Department of Defense are accelerating the use of additive manufacturing to reduce long lead cycle times and to produce large volumes of complex parts for advanced weapons systems. Only 20%-40% of titanium powder used in additive manufacturing ends up in fabricated parts. Air Force and U.S. The post IperionX Wins U.S.

Additive manufacturing 52

Additive manufacturing Cycle time Sourcing Aerospace 52

Additive Manufacturing

FEBRUARY 5, 2023

Freeform’s advanced printing technology eliminates historical production barriers and allows manufacturers in any industry to quickly go from idea to volume production. Freeform’s autonomous printing factories and manufacturing-as-a-service business model solve these challenges.

3D printing 52

3D printing Prototype  Aerospace Additive manufacturing 52

Additive Manufacturing

MAY 3, 2023

With proven flagship technologies compatible with both industrial and, more recently, desktop DLP/LCD 3D printers, COR materials bring additive manufacturing to true production quality. We see a world where every designer, inventor, and engineer can quickly and affordably make their ideas real with digital manufacturing.

3D printing 52

3D printing Additive manufacturing Sourcing Prototype  52

Manufacturer's Monthly

DECEMBER 11, 2023

With 3D printing beginning to finally have the impact on manufacturing that was expected some 30 years ago, manufacturers remain wary of truly capitalising on it. Additive Assurance is looking to change that. Fatigue failures happen for two main reasons in additive manufactured parts according to Jurg.

3D printing 87

3D printing Additive manufacturing Manufacturing Aerospace 87

E&T

OCTOBER 13, 2022

One of the key concerns facing the increasing adoption of additive manufacturing (AM) by OEMs and their suppliers alike is traceability. According to the US Federal Aviation Authority (FAA), around 520,000 counterfeit aerospace parts are installed in planes each year. But how can the industry address this?

3D printing 78

3D printing Supply Chain Aerospace Value chain 78

Additive Manufacturing

MAY 1, 2023

The closed-loop system is designed to operate in a smaller-footprint environment outside of a manufacturing floor, such as an office. The Wematter Gravity was designed to make additive manufacturing accessible in smaller environments. The small footprint (0.7

3D printing 52

3D printing Additive manufacturing Consumer Goods Automotive 52

Frost & Sullivan Manufacturing

JUNE 30, 2022

“With sustainability becoming the overarching theme across industries, focus on electric vehicles (EV), hydrogen fuel cells, and renewable energy sources is growing,” said Ram Ravi, Industry Principal at Frost & Sullivan. Improving the efficiency of EV powertrains and electric motors will drive demand for metrology software.”.

Artificial Intelligence 52

Artificial Intelligence Cycle time Aerospace Automotive 52

Trimantec

JANUARY 22, 2020

As a manufacturer, have you ever pondered the benefits and risks of outsourcing? Among the advantages, it alleviates the need for you to acquire additional space and trained labor. Among the advantages, it alleviates the need for you to acquire additional space and trained labor. Outsource Manufacturing and Its Subsets.

Manufacturing 52

Manufacturing 3D printing Assembly Line Made-to-spec 52

MEM

JUNE 14, 2023

WAAM3D, the global leader in Wire Arc Additive Manufacturing (WAAM®), has announced the v2 release of its signature WAAMCtrl® software at TCT360. Manufacturing & Engineering Magazine | The Home of Manufacturing Industry News The post WAAM3D Releases WAAMCtrl® v2 at TCT360 appeared first on Manufacturing & Engineering.

Compliance 52

Compliance Process control Industry 4.0 Industry 4.0 52

Dinesh Mishra

JANUARY 2, 2023

Track 1: OP-ED: Green Tech in Aviation: Conversation Speaker: Mr. Kishore Jayaraman, President, Rolls-Royce, India & South Asia When: Friday, 9 th December 2022 Aerospace Industry Leader on Green Technologies. Track 3 : 21 st Century Workforce Challenges in Technology & Manufacturing. Track 2 : EV Adoption: The India Story.

Aerospace 52

Aerospace Manufacturing Point of use Artificial Intelligence 52

Fabricating & Metal Work

DECEMBER 20, 2022

The manufacturing industry, including the metalworking sector, is increasingly applying sustainable business practices as pressures such as regulations mount. At this rate, the manufacturing sector can expect more regulations in the future. Sandvik Coromant’s CoroPlus PIP helps make the manufacturing process more sustainable.

Compliance 105

Compliance Industry 4.0 Industry 4.0 Supply Chain 105

E&T

NOVEMBER 23, 2022

The NTU-developed method also uses less energy-intensive processes and heavy metals compared to current industrial methods of manufacturing battery anodes. The research has been published in Additive Manufacturing.

Composites 45

Composites Aerospace Form Additive manufacturing 45

Dinesh Mishra

DECEMBER 26, 2022

And, by investing in heat recovery and photovoltaic systems, as well as purchasing the required energy from renewable sources, the first milestone has already been reached: Production operations at the CHIRON Group sites in Germany are now carbon-neutral. Around two thirds of machines and solutions that are sold are exported.

Additive manufacturing 52

Additive manufacturing Automation Supply Chain Aerospace 52

Additive Manufacturing

JANUARY 6, 2023

The company, a leading manufacturer of advanced medical devices, pharmaceutical diagnostics, and other solutions critical to the future of medicine, has an urgent mission to create a world where healthcare has no limits. The 4 million scanners and other medical devices that GE HealthCare has installed globally are one major source.

Artificial Intelligence 52

Artificial Intelligence Fit Pharmaceutical Sourcing 52

Fastener News Desk

APRIL 25, 2023

Such alloys are excellent candidates to build aerospace parts for high-temperature applications, like those inside aircraft and rocket engines, because they can withstand harsher conditions before reaching their breaking points. GRX-810 is an oxide dispersion strengthened alloy.

3D printing 52

3D printing Aerospace Sourcing Additive manufacturing 52

Manufacturer's Monthly

AUGUST 3, 2022

It is where the normally invisible decision makers are often to be seen presenting at a conference or walking the exhibition floor, giving the opportunity to hear the important news straight from the source, or have a direct meeting or discussion. And the critical mass of engaged industry players is its own source of opportunity.

Artificial Intelligence 75

Artificial Intelligence Sourcing Supply Chain Prototype  75

Manufacturer's Monthly

MARCH 18, 2024

Image: Amiga Engineering Amiga Engineering has long been a beacon in the Australian manufacturing landscape for diversifying and meeting the needs of wider industry and remaining relevant. Amiga Engineering is an Australian based manufacturing company known for its innovation and advancements in the industry.

3D printing 83

3D printing Additive manufacturing Manufacturing Advanced manufacturing 83

Mold Making Technology

FEBRUARY 21, 2024

Source (clockwise): Open Mind Technologies, VizSeek, CloudCNC and Moldex3D MMT staff continue to curate a list of relevant technologies in the form of roundups for readers to get a glimpse of what’s new and what’s improved. manufacturers to precision machine components more quickly and efficiently.

3D printing 59

3D printing Sourcing Robotics Robotics 59

i4.0 today

MARCH 1, 2024

Precision engineering has been the key to high quality and safety in industries such as aerospace and medical technology for decades. As manufacturing technology advances, new trends are emerging that are pushing the boundaries of what is possible – from 3D printing to intelligent production networks. Today Magazine.

3D printing 52

3D printing Aerospace Automotive Function 52

Fastener News Desk

NOVEMBER 8, 2022

NOTE: This case study is based on 3DEO’s production of the ball return tube for a US-based Tier 3 aerospace supplier in the aerospace and aviation industry. . Since this Tier 3 aerospace supplier could not find a manufacturing partner, they turned to 3DEO and metal 3D printing as a ‘Hail Mary’ alternative. ”

3D printing 52

3D printing Aerospace Prototype  Additive manufacturing 52

Modern Machine Shop

APRIL 22, 2024

Source: MetalQuest From the earliest days of automation at IMTS featuring a robot hand moving parts, there has been a massive evolution in technology. Automation may be difficult to define broadly, but it’s become a prerequisite for production, whether a shop has a single machine or is a huge manufacturer, according to Eelman.

Automation 98

Automation Robotics Robotics Artificial Intelligence 98

Fastener News Desk

SEPTEMBER 20, 2022

Aerospace, energy and other sectors now have an easy way to efficiently produce high-strength, high-temperature parts in volume with IN625 across a portfolio of 3D printing options. Manufacturers looking to produce complex geometries in IN625 now have a one-stop shop for efficient Additive Manufacturing 2.0

3D printing 52

3D printing Additive manufacturing Rapid prototyping Aerospace 52

Additive Manufacturing

NOVEMBER 4, 2022

The healthcare industry has been a leader in the application of additive manufacturing (AM) since 1988. Adam Penna: How has additive manufacturing changed during the last two years? Greg Hayes: Across all industries, additive manufacturing has two main areas of change that are now coming to fruition.

3D printing 52

3D printing Supply Chain Additive manufacturing Sourcing 52

Manufacturer's Monthly

JULY 10, 2023

During more than two decades with CSIRO I’ve witnessed and been part of numerous digital innovations across Australian manufacturing and other industries. Globally and domestically the manufacturing industry is at a challenging point. Some in the manufacturing industry will be familiar with ROS and its current version ROS2.

Automation 59

Automation Robotics Robotics Industry 4.0 59

Mold Making Technology

APRIL 24, 2024

Source | KraussMaffei KraussMaffei comes to NPE2024 with the motto “Make plastic green — with high quality and efficiency.” ” This is exemplified through injection molding, extrusion, reaction process machinery, automation and additive manufacturing focusing on the circular economy and reducing the CO 2 footprint.

Automation 52

Automation Composites 3D printing Function 52

Dinesh Mishra

JANUARY 30, 2023

India is among the world’s biggest metal-cutting machine tools markets, with sectors like automotive, general engineering, energy, and aerospace being the major demand drivers. HSTEC specializes in the development, manufacture, and repair of high-speed motor spindles and fixtures.

Industry 4.0 52

Industry 4.0 Industry 4.0 Aerospace Automotive 52

Additive Manufacturing

AUGUST 27, 2022

According to its President, Bob Swenson, TriTech is a spin-off of his former company, AmeriTi Manufacturing, which was sold to Kymera International also on April 5, 2022. The 3D printing is the latest addition, and the binder jet process is a unique cutting-edge manufacturing process for producing complex titanium parts.

Rapid prototyping 52

Rapid prototyping 3D printing Prototype  Fit 52