Manufacturer's Monthly

DECEMBER 8, 2024

This course is designed for engineers, managers and quality personnel who are involved in the design, manufacturing, fabrication and examination of process piping that is being built to the requirements of US Codes andStandards.

Fit 98

Fit Form Manufacturing 98

Design World

DECEMBER 13, 2022

Teschler on Topic Leland Teschler • Executive Editor lteschler@wtwhmedia.com On Twitter @ DW_LeeTeschler Back in the 1980s, a buddy of mine who was a plant manager proudly showed me the computer network he’d set up.

162

162

Manufacturer's Monthly

APRIL 22, 2025

The show attracts designers, engineers, managers, and other decision makers who are involved in designing or manufacturing products that utilise electronics and is the only specialised event for the electronics industry in Australia. Topics include: Reliability in programmable power supplies.

Electronics 95

Electronics Compliance Manufacturing Automation 95

ATS

JANUARY 8, 2025

Whiteboards, cards and spreadsheets may have had their place, but manufacturers who are serious about improving their competitive position should look to one tool, a computerized maintenance management system (CMMS). A CMMS helps maintenance managers handle the many demands and challenges they face. In a CMMS vs.

Function 98

Function Compliance Fit Form 98

Manufacturer's Monthly

NOVEMBER 6, 2024

This course is designed for engineers, managers and quality personnel who are involved in the design, manufacturing, fabrication and examination of process piping that is being built to the requirements of US Codes and Standards.

Fit 97

Fit Form Manufacturing 97

Manufacturer's Monthly

APRIL 1, 2025

The course will be facilitated by Canadian expert and manager of Standards, Office of Public Safety, CWB Group, Cristian Zanfir. compliance, covering key topics such as: Certification for welding contractors, inspectors, and procedures. Today, Cristian serves as the manager of Standards in the CWB Groups Office of Public Safety.

Compliance 67

Compliance Manufacturing 67

Canadian Metalworking Magazine

AUGUST 31, 2020

Artificial intelligence and machine learning are powerful tools that allow Leo to read thousands of articles published every day and prioritize a top selection based on the topics, organizations, and trends that matter to you. In the case of Leo, we risk introducing bias when teaching him broad topics such as “leadership.”

Artificial Intelligence 119

Artificial Intelligence 119

Mold Making Technology

FEBRUARY 23, 2025

Isaac Trevino, MMT EAB member and business development manager for Best Tool and Engineering (BTE) shares his top article picks. Isaac Trevino is the business development manager at Best Tool and Engineering (BTE) , which was founded in 1991 and is located in Clinton Township, Michigan. supplier to bring tooling back stateside.

Prototype  84

Prototype  Automation Automotive Sourcing 84

Dinesh Mishra

APRIL 4, 2025

The full stage program will go live on 14 April 2024 with all presentation slots, topics, and speakers available at www.ligna.de. From Monday to Thursday, the presentation slots will feature both LIGNA.Circular topics and LIGNA.focus presentations. On Friday, the focus topics will take center stage. to 5:30 p.m.). to 5:30 p.m.,

Manufacturing 52

Manufacturing Automation 52

Gary Mintchell

DECEMBER 18, 2024

These topics have been subjects of thoughts all this yeardata, supply chain, digital transformation, predictive maintenance, skilled labor. Building Supply Chain Resilience Through Improved Management Practices Augmented by AI The past few years havent seen much progress in mitigating global supply chain disruptions.

Supply Chain 130

Supply Chain Artificial Intelligence Automation Manufacturing 130

Gary Mintchell

APRIL 17, 2024

Almost all respondents (97%) believe that automation and robotics will transform the automotive industry over the next five years, with a similar number (96%) predicting that software, digitalization and data management will be equally significant.

Automotive 147

Automotive Supply Chain Manufacturing Robotics 147

Gary Mintchell

APRIL 27, 2023

We are therefore very pleased that we are now entering into a direct exchange with the OPC Foundation through the MoU,” says Susanne Dehmel, member of the Bitkom management board. “Interoperability is important to ensure seamless collaboration between different systems. Bitkom e.V. Bitkom e.V.

Industry 4.0 130

Industry 4.0 Industry 4.0 Sourcing Automation 130

Gary Mintchell

DECEMBER 11, 2023

By design, the MQTT specification does not dictate a Topic Namespace or any payload encoding. However, as the IIoT and other architectures leveraging the publisher/subscriber model are adopted by device OEMs in the industrial sector, having different Topic Namespace and payload encoding can inhibit interoperability for the end customer.

Sourcing 147

Sourcing Automotive Automation Manufacturing 147

Frost & Sullivan Manufacturing

DECEMBER 19, 2024

The shift from traditional connectivity to comprehensive digital infrastructure solutions is empowering businesses to embrace transformative technologies like AI, multi-cloud management, and advanced connectivity platforms. AI in Network Management: Leveraging AI for automation, predictive analytics, and operational efficiency.

Automation 52

Automation Function 52

Gary Mintchell

NOVEMBER 14, 2023

This is one of those conversations initiated when a PR person notices I cover a topic. Note: Progress Chef (formerly Chef) is a configuration management tool written in Ruby and Erlang. The post Managing Applications at the Edge appeared first on The Manufacturing Connection. The Edge is an important part of the network today.

Compliance 130

Compliance Supply Chain Automotive Automation 130

ATS

DECEMBER 30, 2024

This blog describes how a holistic approach to maintenance, repair and operations (MRO) data management builds a solid foundation for improving operational efficiency. Introduction to MRO data management MRO data consists of all the records the business keeps relating to asset care. This data often lives in multiple locations.

Supply Chain 52

Supply Chain Sourcing Compliance Form 52

Cisco Industrial Automation

JUNE 7, 2022

3 – Discover how simple it is to manage industrial networks and their connected assets. But to cross the finish line you need the right tools to manage your industrial IoT deployment. We will be talking about a variety of industrial-networking topics. I hope to see you in person or online at Cisco Live 2022.

Assembly Line 196

Assembly Line Robotics Robotics Manufacturing 196

Mold Making Technology

JUNE 1, 2025

Corey Fox, MMT EAB member and operations manager for Accede Mold & Tool, shares his top article picks. By 2020, he became moldmaking manager and was a finalist for the Rising Star Award. In June 2023, Accede promoted him to operations manager, overseeing manufacturing specialties, quality and safety.

Automation 52

Automation Bottleneck Sourcing Robotics 52

Gary Mintchell

MAY 3, 2023

IT-oriented companies strive to help customers manage and use data in a better way. The one for today contained the topic of DataOps. I first heard of DataOps as part of a company’s offer was Hitachi Vantara and then a start-up HighByte. Just a quick note from an experience earlier this morning.

Automation 130

Automation Manufacturing 130

Manufacturer's Monthly

MAY 1, 2025

Following the success of the co-location in 2023 we are delighted to again be holding Electronex alongside Australias premier manufacturing event with more than 27,000 sqm of space being used at the MCEC, said managing director of Electronex, organiser AEE, Noel Gray. Topics include: Reliability in programmable power supplies.

Electronics 57

Electronics Advanced manufacturing Manufacturing Compliance 57

Control Engineering

SEPTEMBER 15, 2023

Global management consulting firms agree that digital twins add substantial business value to a company’s performance – value that, once achieved, turbo-charges business indicators for customers, investors and other stakeholders. 21 webcast “ Factory Virtual Twin as a Service.”

Supply Chain 122

Supply Chain Manufacturing Sourcing Artificial Intelligence 122

ATS

MAY 29, 2025

Common tracking methods include wrench time studies, digital work order reports, and computerized maintenance management systems (CMMS). Poor work order management: Unclear or missing instructions or poorly scoped jobs. For example, our teams can suggest better ways of managing spare parts inventory to reduce possible delays.

Lean manufacturing 52

Lean manufacturing Bottleneck Cycle time Manufacturing 52

Dinesh Mishra

DECEMBER 31, 2024

Christine Herbst-Kubitz, General Manager, Siemens Taiwan Digital Industries Siemens Digital Industries is at the forefront of providing digital transformation solutions for manufacturers, spanning automation, control systems, and industrial software.

Smart manufacturing 52

Smart manufacturing Supply Chain Automotive Aerospace 52

Gary Mintchell

NOVEMBER 23, 2022

Tilo Merlin holds the role of instrumentation platform manager at ABB in Frankfurt, Germany. ABB finds customers wishing to separate asset management from the control system. Energy management is currently the important function of asset management.

Function 130

Function Process control Manufacturing Automation 130

Manufacturer's Monthly

JUNE 25, 2024

Image: FotoArtist/stock.adobe.com A hand with safety Across industries, workers’ safety continues to be a trending topic. But according to Steven Edwards; Category Manager – Safety, Materials Handling & Storage at Motion; there are many crucial topics within industry circles that don’t receive the same attention.

Food Production 93

Food Production Manufacturing 93

Robotics Business Review

AUGUST 12, 2024

Presenters and panelists will examine robotics investment trends, motion-control fundamentals, relevant standards, and opportunities posed by generative AI, among many other topics. Robotics pioneer Rodney Brooks, co-founder of iRobot and Rethink Robotics, will keynote RoboBusiness 2024.

Robotics 119

Robotics Robotics Automation Artificial Intelligence 119

Gary Mintchell

AUGUST 22, 2023

More robust alarm management, improved access to maintenance information, and enhanced support of international standards. This news is interesting because data has become a meaningful topic. Linkage with Plant Resource Manager (PRM) CI Server can now link with Yokogawa’s PRM (R4.06 Now I’m back on Yokogawa’s radar.

Function 130

Function Manufacturing 130

Robotics Business Review

JANUARY 19, 2025

Our first two cohorts have spurred terrific startups that are still on the rise, and were eager to see what a new wave of founders can achieve, said Kevin Dowling, managing director of the Robotics Factory and hardware program at Innovation Works. Selected companies will participate in this years program, which will run from June to December.

Robotics 75

Robotics Robotics Bill of Materials Cargo 75

Robotics Business Review

APRIL 30, 2025

Advancing Remote Surgery: Tackling Latency, Precision, and Security Issues: Darran Porras, the market development manager at Healthcare RTI, and Tom Amlicke, the technical director of robotics at MedAcuity , will explore surgical robotics at 1:45 p.m. in Room 260. in Room 257B. in Room 257B. in Room 256. in Room 256.

Robotics 59

Robotics Robotics Logistics Automation 59

SMMT

APRIL 17, 2025

The Technical Stage New to the show, the Technical Stage in Hall 4 will host toolbox talks designed to engage drivers and fleet managers through interactive, hands-on sessions. Experts include representatives from SMMT, Department for Transport, Ford of Britain and Ireland and Volvo Trucks.

Compliance 52

Compliance Logistics Manufacturing 52

Dinesh Mishra

MARCH 21, 2025

. “We are delighted that, with the Embedded Park at HANNOVER MESSE, we have created one of the key forums for presenting new developments in embedded systems,” says Emanuel Marra, Senior Project Director Trade Fair & Product Management at HANNOVER MESSE. More than 1.5

Sourcing 52

Sourcing Automation Rapid prototyping Smart manufacturing 52

ATS

MAY 13, 2025

Infrastructure and operational costs Managing rising operational expensesincluding real estate, energy, and logisticsrequires manufacturers to adopt smarter maintenance strategies , leaner production practices, and increased automation.

Manufacturing 52

Manufacturing Logistics Aerospace Industry 4.0 52

Gary Mintchell

FEBRUARY 27, 2023

One path I am exploring concerns change management and how these initiatives often run low on focus and intellectual energy. If you have thoughts about this topic (or any topics), send an email to garymintchell@hey.com The more data we have the more likely we are to drown in it.

Industry 4.0 130

Industry 4.0 Industry 4.0 Manufacturing 130

Frost & Sullivan Manufacturing

NOVEMBER 11, 2024

Frost & Sullivan’s latest webinar explored the topic “ How to Leverage Computer-Aided Design software for a Competitive Edge? How is your organization using computer-aided design (CAD) software to enhance design efficiency and outperform rivals?

Computer-Aided Design (CAD) 52

Computer-Aided Design (CAD) Rapid prototyping Artificial Intelligence Aerospace 52

Robotics Business Review

OCTOBER 16, 2024

Source: Formant Slalom, a global business and technology consulting company, and Formant , a provider of cloud robotics management software, today announced a strategic partnership. The companies plan to combine Slalom’s deep digital transformation and change management expertise with Formant ’s cutting-edge robotics platform.

Robotics 108

Robotics Robotics Automation Sourcing 108

i4.0 today

APRIL 28, 2025

Tony Karatzas, Associate Professor in Supply Chain Management at UEA , said: “Over 90% of UK manufacturers are SMEs, yet theres been little guidance on digital servitization. This toolkit helps SME leaders unlock its potential and embrace the future of industry.

Manufacturing 59

Manufacturing Artificial Intelligence Supply Chain Industry 4.0 59

i4.0 today

MAY 12, 2025

With a mix of strategic and technical talks, the central stage will cover the biggest topics across the industry right now. The presentations are tailored for engineers, academics, senior management and industry professionals across the supply chain.

Supply Chain 52

Supply Chain Automotive Industry 4.0 Industry 4.0 52