Manufacturing Tomorrow

JUNE 12, 2025

About automatica [link] 06/12/25, 06:31 AM | Automation & IIoT , Engineering Subscribe to Newsletter More Engineering News | Stories | Articles Featured Product MRPeasy - ERP for Small Manufacturers That Delivers Results Always know what you have in stock and what youll need to fulfill orders.

Robotics 52

Robotics Robotics Industry 4.0 Industry 4.0 52

Mold Making Technology

MAY 27, 2025

Surface texture measurement provides an objective record (and in the case of 3D measurement, a “digital twin”) for historical reference. This trend echoes a similar shift which occurred in metals machining over the last several decades. Figure 5 shows two 3D surface texture measurements.

Function 59

Function Sourcing Automotive Form 59

Manufacturing Tomorrow

JUNE 19, 2025

By automating record and audit logs, LABELQ provides 21 CFR part 11 regulatory compliance and full traceability, while eliminating the need for manual inspection tasks and lowering production costs. EXAIR Cabinet Coolers incorporate a vortex tube to produce cold air from compressed air - with no moving parts.

Pharmaceutical 52

Pharmaceutical Compliance Supply Chain Automation 52

Modern Machine Shop

DECEMBER 1, 2022

A donut-shaped machine tool component called the AKZ FDS adapter illustrates the increasingly intricate links between additive manufacturing (AM) and CNC machining. A version of this article was our cover story in the December 2022 issue of Modern Machine Shop. The holes were then sealed off at the surface of the part.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Form 98

AU Manufacturing

MAY 23, 2023

In a blog article derived from a whitepaper titled, “Maintaining Battlefield Superiority with Metal 3D Printing,” Velo3D examined five ways that sophisticated metal AM can revolutionise the defence sector.

Additive manufacturing 90

Additive manufacturing 3D printing Supply Chain Manufacturing 90

21st Century Tech

FEBRUARY 19, 2023

It intends to explore and teach the transitioning of today’s manufacturing systems into on-demand, custom-designed processes that use 3D printing or additive manufacturing, and artificial intelligence (AI). Discovering AI/machine learning methods to enable design automation and customization.

3D printing 105

3D printing Manufacturing Artificial Intelligence Assembly Line 105

Gary Mintchell

MAY 8, 2023

Combining a couple of recent memes in a new way, this article I received through a marketing person I’ve known for more years than either of us will admit to takes a refreshingly positive look at AI. Digital manufacturing means we can prove out that whole complex machining process beforehand.

Aerospace 130

Aerospace Fit Artificial Intelligence Manufacturing 130

Modern Machine Shop

DECEMBER 20, 2023

Photo Credit: Getty Images Modern Machine Shop’s editors and columnists covered a lot of ground in 2023. Modern Machine Shop’s Top 10 Articles of 2023 Tips for Designing CNC Programs That Help Operators. Modern Machine Shop’s Top 10 Articles of 2023 Tips for Designing CNC Programs That Help Operators.

Aerospace 98

Aerospace Automation Form Sourcing 98

Mold Making Technology

APRIL 16, 2023

3D measurement tools are available that combine the measurement capabilities of a portable coordinate measuring machine (CMM) with the noncontact functionality of a laser line probe. A portable CMM with advanced laser technology will reduce first-article inspection costs for injection-molded parts.

Bottleneck 98

Bottleneck Function Manufacturing 98

Mold Making Technology

NOVEMBER 29, 2022

Mold and machine shops used to determine accuracy in manufacturing projects with theodolites and template comparisons, but today scanning and probing with a laser tracker has become the standard in many industries because of their speed and accuracy. First Article Inspection. Model Generation.

Automation 98

Automation Robotics Robotics Manufacturing 98

Mold Making Technology

JULY 4, 2023

These are the companies from this section: 3D Hybrid Solutions — Seal Beach, CA, 309-264-4834 3D Systems — Rock Hill, SC, 803-326-3900 Absolute Machine Tools Inc. Paul, MN, 651-289-9700 Mazak North America — Florence, KY, 859-342-1700 Methods 3D Inc. — Cincinnati, OH, 513-745-4510 Arburg Inc.

Additive manufacturing 98

Additive manufacturing Sourcing Manufacturing Composites 98

AU Manufacturing

OCTOBER 20, 2022

Article by Nick Allen, MD, 3DPRINTUK. As a company, 3DPRINTUK is embedded in the additive manufacturing (AM) / 3D printing world. As such, we can advise you on issues relating to technology and material choice, orientation of parts in a build area to maximise return, design for AM, etc… etc… We live and breathe 3D printing every day.

3D printing 98

3D printing Rapid prototyping Prototype  Additive manufacturing 98

Mold Making Technology

MAY 21, 2023

For complex mold machining, like this glass bottle mold, CAD/CAM with innovative toolpath strategies is essential. Photo Credit, all images: BobCAD-CAM Moldmaking is complex, so mold builders are always looking for ways to simplify and streamline getting the part to code with easy, intuitive tool paths.

Cycle time 98

Cycle time Fit Automation 98

Manufacturer's Monthly

OCTOBER 18, 2023

Plastic thermoforming companies like Duo Form have discovered how to leverage large-format extrusion 3D printing using low-cost plastic pellets to gain a competitive edge. Subtractive Moulds Versus Additive Moulds In conventional thermoforming, plastic sheet material is shaped over moulds to produce the finished part.

3D printing 98

3D printing Form Lead Time Additive manufacturing 98

Mold Making Technology

DECEMBER 13, 2022

The precise fit of this part was possible with on-machine measurement and intelligent modification technology integrated into the control of a high-speed machining center. Machining a micron-level precision mold on the first try is difficult to achieve. Photo Credit, all images: Jingdiao North America.

Function 97

Function Fit Form Manufacturing 97

Modern Machine Shop

SEPTEMBER 1, 2024

The first article describes how 2D and 3D sensors enable Boston Dynamics’ Stretch robot to perform more complex tasks, such as unloading boxes from a trailer. But a 3D vision system makes this possible. Finally, we have a story from Athena Manufacturing.

Automation 74

Automation Manufacturing Robotics Robotics 74

Modern Machine Shop

NOVEMBER 20, 2024

We’ve recently started utilizing fixtures which hold more parts to improve productivity. Can you help us discern when it makes sense to increase parts per fixture and when to keep it simple? The purpose of increasing part density on a fixture is amortization of tasks for the machine and operator, or even a robot.

Cycle time 88

Cycle time Robotics Robotics Automation 88

AU Manufacturing

SEPTEMBER 9, 2022

Article by Daniel Tweer, Managing Director, Rösler UK / AM Solutions. Post-processing is a hot topic in the area of additive manufacturing (AM), which is unsurprising as in many applications, the post-processing step(s) can account for upwards of 50% of the total unit cost for an AM part. GOOD ENOUGH?

3D printing 105

3D printing Additive manufacturing Prototype  Rapid prototyping 105

Robotics Business Review

FEBRUARY 20, 2024

Gearbox manufacturer SEAT Componentes needed to automate the unloading of 18,000 machined gears a day at its plant in Spain to guarantee the quality of the parts. Source: Universal Robots No fixed installations The UR10e cobots currently serve 10 different machining lines. UR robot arms transfer parts.

Manufacturing 101

Manufacturing Robotics Robotics 3D printing 101

AU Manufacturing

MARCH 12, 2023

Article by David Alatorre, CTO, Rivelin Robotics The use of metal additive manufacturing (AM) has revolutionized the manufacturing industry, allowing for the creation of complex and intricate parts in a faster and more cost-effective manner. It is also difficult to scale if the demand for AM parts begins to increase significantly.

Robotics 98

Robotics Robotics Automation Additive manufacturing 98

Robotics Business Review

JULY 23, 2024

But that’s part of the Synnyvale, Calif.-based system placements in the past quarter, the surgical device manufacturer is ramping up production as part of the limited launch. Editor’s note: This article was syndicated from The Robot Report sibling site Medical Design & Outsourcing.

Sourcing 118

Sourcing Robotics Robotics Supply Chain 118

Control Engineering

JULY 13, 2023

With related online articles, see other observations, 23 more photos and captions related to smart automated manufacturing technologies. Department of Defense, industry and academia, and it is part of the national network of manufacturing innovation institutes. and the co-located Jane Addams Resource Corp. training facility.

Automation 98

Automation Form Robotics Robotics 98

Modern Machine Shop

AUGUST 26, 2024

Updates include new functionality, upgraded visuals, features to increase machining performance and reduce production costs, and much more. “Any time there is a human operator touching a part, the chance for scrap increases,” Chmura says.

Function 98

Function 98

Robotics Business Review

MAY 7, 2024

Coelho says that includes state-of-the-art 3D printers and a full machine shop. Editor’s Note: This article first appeared on sister website MassDevice. It also includes microscopes, incubators, lab ovens, test and measurement equipment and pallet jacks and racking.

Robotics 118

Robotics Robotics Manufacturing 118

AU Manufacturing

MAY 18, 2023

Major considerations in copper’s material qualities The quality of the materials used is always the first step towards manufacturing high-value parts, and fusing copper with other metals to create the alloys required for 3D printing high-value parts has not been a simple feat.

Additive manufacturing 98

Additive manufacturing Fit 3D printing Manufacturing 98

Robotics Business Review

JUNE 10, 2024

Part of this solution includes the ability for SMMs in Southwestern Pennsylvania to work directly with the institute’s team of robotics engineers and get hands-on with advanced technologies in the institute’s Pittsburgh facility. CapSen Robotics has designed end effectors to sort metal parts.

Robotics 120

Robotics Robotics Manufacturing Automation 120

Robotics Business Review

APRIL 10, 2024

He described the machine as a mobile manipulator , with roughly the stature of a human. How the robot engages carts remains part of the mystery. It is also taking a “building-block” approach to hardware and plans to adjust software and machine learning for navigation and learning new tasks. It is just under 6 ft. (2

Robotics 126

Robotics Robotics Supply Chain Bill of Materials 126

Robotics Business Review

MARCH 27, 2024

the rover features a 5052 aluminum alloy chassis, six 3D-printed nylon wheels, a robotic arm with end-of-arm tooling (EOAT), a life-detection module for sample collection, and 14 onboard cameras. This article is reposted with permission. Coming in at 50 kg (110 lb.), The robotic arm on the Northeastern team’s Mars Rover.

Robotics 120

Robotics Robotics 3D printing Function 120

Mold Making Technology

JANUARY 30, 2025

Murphy Forsyth, MMT EAB member and Zero Tolerance general manager and processing engineer shares her top article picks. Source | Zero Tolerance Murphy Forsyth is the injection molding general manager at Zero Tolerance , a rapidly growing plastic injection mold machine shop located in Clinton Township, Michigan.

3D printing 52

3D printing Cycle time Prototype  Function 52

Modern Machine Shop

FEBRUARY 4, 2024

The hybrid CNC machine tool is an idea that continues to advance. Applications are not so widespread that hybrid machines are found in typical job shops, but applications are numerous enough to offer an expanding market that continues to be served. The hybrid machine tool is, in one sense, a niche technology.

3D printing 52

3D printing Additive manufacturing Supply Chain Form 52

Modern Machine Shop

MAY 12, 2024

The chuck jaws used in this turning operation were previously machined, but carried more weight and clamped with more pressure than necessary. Now, APG’s sister company uses 3D printed jaws more optimized to this process. To arrive at fully metal parts, however, the BMD prints must be debound and then sintered.

3D printing 52

3D printing Cycle time Form Additive manufacturing 52

Mold Making Technology

OCTOBER 29, 2023

Stop by next month to see what the most-viewed articles were from October—based on Google Analytics. Part 1 MoldMaking Technology Editorial Director Christina Fuges introduces new MMT Editorial Advisory Board Member Mike Close, Sr. This episode is brought to you by ISCAR with New Ideas for Machining Intelligently.

3D printing 59

3D printing Supply Chain Automation Manufacturing 59

Robotics Business Review

APRIL 17, 2024

” “We started thinking about functionally safe 3D vision,” he recalled. ” In the new video below, the previous version of Atlas handles automotive parts and real products weighing up to 25 lb. You need to focus on a use case, build a reliable machine, and manufacture it in a way to build a business.

Robotics 131

Robotics Robotics Artificial Intelligence Automotive 131

Mold Making Technology

DECEMBER 27, 2022

It’s critical to keep in mind how your 3D-printed design translates to injection molding for both manufacturability and cost. Ten years ago, there was a broadly accepted and well-defined route that a product developer might travel to take a product from concept to actual part. Photo Credit, all images: Protolabs Inc.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Prototype  52

Manufacturing Tomorrow

JUNE 16, 2025

These pinions provide easy installation and immediate usability, making them suitable for food machinery, wire processing equipment, and packaging machines where reliable and precise gear performance is critical. Never forget to order parts on time or fail to notice a late delivery from your vendor.

3D printing 52

3D printing Automation Warehousing Industry 4.0 52

Mold Making Technology

JANUARY 30, 2024

Source: (top left) Boucherie, (top right) TK Mold & Engineering, (bottom left) Emuge-Franken, (bottom right) Plastic Ingenuity The top ten most-viewed articles in January were not only a testament to what our readers took an interest in—they reflect what is trending in our small but mighty world of moldmaking. Dapra Corp.,

Sourcing 52

Sourcing 3D printing Lead Time Supply Chain 52

AU Manufacturing

APRIL 21, 2023

Article by Oleg Yermanok, Application Engineering Manager, Massivit 3D Additive manufacturing (AM) has the ability to disrupt industrial processes and to facilitate the achievement of innovative, cost-effective, and speedy outcomes when compared to traditional production processes.

Composites 52

Composites 3D printing Manufacturing Additive manufacturing 52