Dinesh Mishra

JANUARY 30, 2023

MAKERS AND MOVERS: STRATASYS INDIA Makers and Movers 2023 started off to a scintillating start with a highly informative and engaging conversation between Rajiv Bajaj, the Managing Director of Stratasys India & SEA, and our editor on additive manufacturing and how it is transforming the manufacturing industry. 34 million in 2022.

3D printing 52

3D printing Manufacturing Additive manufacturing Automotive 52

Fastener News Desk

NOVEMBER 19, 2023

This has taken the form of long lead times, as well as stalling of production when parts needed for manufacturing fail. There is a potential solution, however: additive manufacturing. This opens new doors for faster and more localized manufacture of parts in these and other industries. Industry 4.0

Supply Chain 52

Supply Chain Additive manufacturing 3D printing Manufacturing 52

ATS

MAY 12, 2023

Share The automotive industry is experiencing rapid change. Technology continues to evolve, electric vehicle demand continues to grow and shift the market share balance, and manufacturers remain on the hunt for efficiencies and process improvements. Augmented reality is helping car manufacturers to do so in these areas and more.

Manufacturing 52

Manufacturing 3D printing Automotive Prototype  52

Additive Manufacturing

NOVEMBER 3, 2022

Lonnie Love is a corporate fellow and section head over precision manufacturing and machining at Oak Ridge National Laboratory. He is a leader in large-scale additive and advanced manufacturing. You have been involved in additive manufacturing and 3D printing research for some time. I think automotive has leaned.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Automotive 52

Additive Manufacturing

JANUARY 6, 2023

04, 2023 – Formlabs introduces the Automation Ecosystem to enable new levels of 3D printing productivity with Form Auto for back-to-back throughput, Fleet Control for advanced fleet management, and the High Volume Resin System for high-capacity printing. The hardware extension works with Form 3 or Form 3+ 3D printers.

Automation 52

Automation 3D printing Form Prototype  52

Automation Mag

OCTOBER 6, 2023

CMTS (which takes place every other year, alternating with IMTS in Chicago) focuses on the latest equipment and technology in automation, robotics, additive manufacturing, machine tools, metal forming, fabricating, and digital transformation. Trudeau walked the show and spoke to members of the manufacturing community.

Manufacturing 63

Manufacturing Automotive Artificial Intelligence Robotics 63

Additive Manufacturing

SEPTEMBER 19, 2022

ICYMI: Additive manufacturing news reflected the return of IMTS with big announcements before and during the show. Nikon expanded their additive manufacturing reach with bid to takeover SLM Solutions and investment in Hybrid Manufacturing Technologies. Desktop Metal introduced digital sheet metal forming technology.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Form 52

Additive Manufacturing

OCTOBER 3, 2022

ICYMI: Materials and sustainability continue to be a priority for the additive manufacturing community. In-Situ Monitoring “AcGovDustrial” Network Formed : Sigma Additive Solutions, Inc. In-Situ Monitoring “AcGovDustrial” Network Formed : Sigma Additive Solutions, Inc. Essentium, Loctite, Chromatic, 6K, SINTX, M. million U.S.

3D printing 52

3D printing Additive manufacturing Consumer Goods Digital manufacturing 52

Frost & Sullivan Manufacturing

NOVEMBER 28, 2022

Sustainability is at the heart of disruptive transformation across the automotive industry. Its pursuit, whether in the form of vehicle electrification or circular economy practices, is driving change across the entire ecosystem. Beyond OEMs, tire manufacturers are also playing a key role in the transition.

Automotive 52

Automotive Manufacturing 3D printing Value chain 52

Dinesh Mishra

DECEMBER 29, 2023

Notably, our cornerstone entities, Dynamic Manufacturing India magazine and the Industry Samurai awards, remain at the forefront of delivering insightful content and recognizing excellence within the manufacturing sector. Our latest publication, Vol 7 Issue 6, is a pre-Imtex special, focusing on the machine tool and forming industry.

3D printing 52

3D printing Industry 4.0 Industry 4.0 Form 52

Fastener News Desk

JULY 5, 2023

In an era dominated by outsourcing, where cost reduction often takes precedence over other factors, the practice of reshoring manufacturing operations is gaining momentum. The 3D Printing in Auto Repair Task Force has bold ambitions to revolutionize the automotive collision repair process with 3D printed parts.

3D printing 52

3D printing Supply Chain Automotive Manufacturing 52

Manufacturer's Monthly

JANUARY 9, 2023

The Innovative Manufacturing CRC’s time is coming to an end after six years of extraordinary work for Australian manufacturing. Manufacturers’ Monthly reviews the CRC’s journey and outlooks for the future of Australia’s manufacturing SMEs and the broader ecosystem. IMCRC’s beginnings. Engaging industry.

Manufacturing 83

Manufacturing Industry 4.0 Industry 4.0 3D printing 83

Trimantec

JANUARY 22, 2020

As a manufacturer, have you ever pondered the benefits and risks of outsourcing? As with any cost-saving endeavor, outsource manufacturing has its pros and cons. In the past, many companies were hesitant to outsource any of their manufacturing to an outside source. Outsource Manufacturing and Its Subsets. Why Outsource?

Manufacturing 52

Manufacturing 3D printing Assembly Line Made-to-spec 52

Frost & Sullivan Manufacturing

AUGUST 1, 2022

It is being seen as the next big, digitally-enabled leap in automotive manufacturing – modular assembly. Mass personalization has become inevitable in the automotive sector due to the unique tastes and preferences of each consumer. Major chunk of the DT contracts in automotive are in manufacturing and product design.

Supply Chain 52

Supply Chain 3D printing Automotive Logistics 52

i4.0 today

MAY 19, 2023

The first ever recipients of the Made Smarter Awards, celebrating excellence in manufacturing, have been revealed. The scheme has been launched to mark the fourth anniversary of the pioneering Made Smarter adoption programme, a government-funded and industry-led initiative helping SME manufacturers digitalise, decarbonise and drive growth.

Manufacturing 52

Manufacturing 3D printing Robotics Robotics 52

i4.0 today

JANUARY 15, 2024

Each mobile robot, equipped with vision and AI, scans a unique part of the building; collectively these robots complement each other’s view to form a complete map, enabling them to work autonomously in a rapidly changing environment.” Other automotive manufacturers will roll out the technology in the UK, Finland and Germany.

Robotics 59

Robotics Robotics Automotive Logistics 59

Mold Making Technology

MARCH 14, 2024

B A Die Mold Founder and Owner Al Petrucci takes pride in the team’s in­novation, personalized service and collective experience in mold manufacturing. Uses 3D solid models and databases to offer mold and new product design and re-engineering of existing products. Source, all images: B A Die Mold Inc. B A Die Mold Inc.

3D printing 113

3D printing Consumer Goods Manufacturing Pharmaceutical 113

Additive Manufacturing

FEBRUARY 5, 2023

Compared to other low temperature processed inks, SuperGrid is stable at room temperature and only forms the conductive film or circuit after deposition. “We Its enhanced flexibility will create unprecedented new product and market opportunities for our electronic device, biomedical, automotive, and display customers.”

3D printing 52

3D printing Electronics Composites Aerospace 52

Additive Manufacturing

SEPTEMBER 4, 2022

SLM Press Release – SLM enters into Investment Agreement with Nikon to further enhance SLM’s leadership position in Additive Manufacturing Nikon to launch all cash public takeover offer for SLM at EUR 20 per share, representing a premium of 75% to the undisturbed closing price as of September 1 st 2022 Key shareholders Elliott, ENA and Hans J.

3D printing 52

3D printing Additive manufacturing Digital manufacturing Aerospace 52

Modern Machine Shop

MARCH 26, 2023

For Thomas/Euclid Industries , this difficulty became the push it needed to experiment with alternative forms of workholding, utilizing Blue Photon ’s adhesive grippers to perform contactless gripping on an EV strut housing made from an aluminum casting. Images courtesy of Thomas/Euclid.

3D printing 105

3D printing Fit Aerospace Automation 105

Fastener News Desk

APRIL 2, 2023

Today, ASTM International standards are widely used in many industries, including construction, manufacturing, transportation, and energy, among others. Some key highlights from the history of ASTM International: In 1898 seventy people meet in Philadelphia to form what would become ASTM, founded by Charles B.

Aerospace 52

Aerospace 3D printing Automotive Fit 52

Fastener News Desk

APRIL 3, 2023

Today, ASTM International standards are widely used in many industries, including construction, manufacturing, transportation, and energy, among others. Some key highlights from the history of ASTM International: In 1898 seventy people meet in Philadelphia to form what would become ASTM, founded by Charles B.

Aerospace 52

Aerospace Automotive 3D printing Fit 52

Modern Machine Shop

DECEMBER 1, 2022

A donut-shaped machine tool component called the AKZ FDS adapter illustrates the increasingly intricate links between additive manufacturing (AM) and CNC machining. Here is the 3D printed adapter. Learn more about the design and manufacture of this 3D printed machine tool component.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Form 98

i4.0 today

MAY 4, 2023

Visual SLAM combines AI and 3D vision technologies to guarantee a superior performance in comparison to other guidance techniques for AMRs. The company’s solutions connect engineering know-how and software to optimize how things are manufactured, moved, powered and operated.

Robotics 52

Robotics Robotics Logistics Automation 52

Ionthis

JANUARY 16, 2021

These industries include electronics, telecommunications, lighting, construction, automotive, aerospace, and energy. Additionally, ERP systems and 3D printing are increasing in these industries. There is a multitude of industries across the world that use sheet metal fabrication in their daily operations. Robotic MIG Welding.

Electronics 52

Electronics Prototype  3D printing Robotics 52

Mold Making Technology

FEBRUARY 21, 2024

Source (clockwise): Open Mind Technologies, VizSeek, CloudCNC and Moldex3D MMT staff continue to curate a list of relevant technologies in the form of roundups for readers to get a glimpse of what’s new and what’s improved. manufacturers to precision machine components more quickly and efficiently.

3D printing 59

3D printing Sourcing Robotics Robotics 59

Fabricating & Metal Work

FEBRUARY 12, 2023

In the United States, the company develops and manufactures highly specialized carbide cutting tools, inserts and rods. It has two manufacturing facilities in the United States, one located in Schaumburg and the other in Sacramento, Calif. We are really focused on materials and the complexity of components,” Cope said.

3D printing 84

3D printing Composites Supply Chain Automotive 84

Additive Manufacturing

APRIL 5, 2023

NASDAQ: SSYS), a leader in polymer 3D printing solutions, today announced it has completed the acquisition of the additive manufacturing materials business of Covestro AG (DAX: 1COV). Automotive air vent prototypes 3D printed with Somos WaterShed Black resin on Neo450 3D printers from Stratasys.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Aerospace 52

AU Manufacturing

APRIL 21, 2023

Article by Oleg Yermanok, Application Engineering Manager, Massivit 3D Additive manufacturing (AM) has the ability to disrupt industrial processes and to facilitate the achievement of innovative, cost-effective, and speedy outcomes when compared to traditional production processes.

Composites 52

Composites 3D printing Manufacturing Additive manufacturing 52

Manufacturer's Monthly

AUGUST 2, 2023

As the director of CSIRO’s Lab 22, Australia’s centre for additive innovation, I have witnessed the rapid and impressive growth of the additive manufacturing (AM) industry. Automotive businesses have adopted AM for rapid prototyping and parts manufacturing, expediting the design process.

Additive manufacturing 68

Additive manufacturing Manufacturing Supply Chain Prototype  68

Mold Making Technology

JANUARY 19, 2023

and Husky Technologies Mold manufacturing is an industry that is vast and varied, and so are the challenges that come with it. Metal 3D Printing Technology Targeting Moldmaking is Launched Photo Credit: Mantle Inc. Photo credit, from top left, clockwise: Xact Metal, Tungaloy, Mitutoyo America Corp. Mantle Inc.

3D printing 98

3D printing Control Algorithm Function Aerospace 98

Modern Machine Shop

APRIL 10, 2023

Brent Donaldson, Editor-in-Chief of Modern Machine Shop: Welcome to Made in the USA, the podcast for Modern Machine Shop all about major themes shaping American manufacturing today, I'm Brent Donaldson. Its manufacturing operations and suppliers have been and still are global. Develop that for the company.

Made-to-spec 98

Made-to-spec Supply Chain Logistics Manufacturing 98

Mold Making Technology

MARCH 12, 2023

The shop designs and manufactures approximately 100 molds a year for various market segments. Get to Know Cavalier Tool & Manufacturing Visit Booth 1309 to experience the Cavalier way. Each representative has a technical, hands-on background in the art of injection mold manufacturing. This year it’s “Lights!

3D printing 98

3D printing Automation Supply Chain Manufacturing 98

i4.0 today

APRIL 4, 2023

However, while printed circuit boards (PCBs) enable digital technologies, the manufacturing processes used to produce them are still largely analog. ‘Digital manufacturing’ refers to any method that is directly controlled by a computer – simply using software in the design process doesn’t count.

Electronics 52

Electronics Manufacturing Digital manufacturing Rapid prototyping 52

Manufacturer's Monthly

AUGUST 15, 2022

Manufacturers’ Monthly sits down with Titomic managing director Herbert Koeck to learn about the company’s future plans – and how it continues to harness cold spray technology as a valuable tool to enter joint ventures with different manufacturers. Titomic provides a complementary advanced manufacturing ability,” Koeck said.

3D printing 70

3D printing Additive manufacturing Aerospace Lead Time 70

Mold Making Technology

JANUARY 26, 2023

A recent development project evaluated the feasibility of using wire-arc additive manufacturing (WAAM) to produce layup tooling for complex contoured winglets mounted at the tips of the wings of MQ-9B SkyGuardian and SeaGuardian (shown above) remotely piloted aircraft from General Atomics Aeronautical Systems Inc.

Composites 52

Composites 3D printing Cycle time Lead Time 52

Additive Manufacturing

MAY 25, 2023

Merger Creates a Next-Generation Additive Manufacturing Company Delivering Industrial Polymer, Metal, Sand and Ceramic Solutions from Design to Mass Production Combined Company Expected to Generate $1.1 We believe this is a landmark moment for the additive manufacturing industry,” said Ric Fulop, Co-founder, Chairman and CEO of Desktop Metal.

3D printing 52

3D printing Additive manufacturing Form Supply Chain 52