Additive Manufacturing

JULY 20, 2022

From initial use as a prototyping tool to additive manufacturing’s role as an enabler for electrification, mobility, and more, the automotive industry is accelerating additive manufacturing. Indirect manufacturing like jigs, fixtures, robots, etc., We see the supply chain is catching up.

Additive manufacturing 98

Additive manufacturing Automotive Manufacturing Prototype  98

MESA

MAY 26, 2023

The project call is also seeking innovative solutions for robotic AM process planning for continuous fiber-reinforced composite structures. This project call addresses the needs of a broad cross-section of our nation’s supply chain including the casting and forging supply chain,” stated Brandon Ribic, Ph.D.,

3D printing 130

3D printing Supply Chain Composites Additive manufacturing 130

i4.0 today

OCTOBER 6, 2022

The Manufacturing & Supply Chain Conference & Exhibition, which is being held at the SEC Glasgow on Thursday, 13th of October 2022, will be the largest event of its kind in Scotland. Digital Transformation in Manufacturing: a practical approach to Industry 4.0’ Impressive Line-up of Speakers.

Supply Chain 52

Supply Chain Industry 4.0 Industry 4.0 3D printing 52

Modern Machine Shop

MARCH 12, 2024

As part of the development program, Lincoln Electric will be 3D printing large-scale propulsion components measuring almost 10 feet in diameter and weighing up to 20,000 pounds. Navy’s goal to accelerate shipbuilding,” adds Mark Douglass, business development manager, Lincoln Electric Additive Solutions.

3D printing 52

3D printing Supply Chain Additive manufacturing Advanced manufacturing 52

Additive Manufacturing

JULY 28, 2022

Combining cutting-edge technology with additive manufacturing redefines the limits set within traditional manufacturing and delivers innovation in places you might not expect. Additive manufacturing (AM), more commonly known as 3D printing, is an innovative process where objects are created one layer at a time.

3D printing 98

3D printing Additive manufacturing Cycle time Supply Chain 98

Fabricating & Metal Work

FEBRUARY 13, 2023

Siemens has announced a new collaboration effort with Xerox Elem Additive Solutions, aimed at strengthening the metal additive manufacturing (AM) capabilities of both businesses. The CATCH facility focuses on the industrialization of additive manufacturing, working with machine builders, material suppliers and end-customers.

Supply Chain 98

Supply Chain Additive manufacturing 3D printing Warehousing 98

Additive Manufacturing

AUGUST 1, 2022

NEW YORK (August 1, 2022) – An estimated six million patients have benefitted directly or indirectly from medical applications of additive manufacturing (AM) and 3D printing – from orthopedic and cranial implants to surgical guides and instruments to dental restorations and external prosthetics.

3D printing 97

3D printing Manufacturing Supply Chain Additive manufacturing 97

Manufacturer's Monthly

MARCH 17, 2024

“The report touches on Australia’s current manufacturing capabilities and all the obstacles that we’re seeing in front of mind for our manufacturing clients. Obstacles like digital transformation, artificial intelligence, additive manufacturing, and cybersecurity.”

Manufacturing 91

Manufacturing 3D printing Artificial Intelligence Beverage 91

Manufacturer's Monthly

JULY 11, 2023

Manufacturers’ Monthly explores how SQP Engineering has progressed from a sub-contract machine shop to a manufacturing solutions hub with the help of Markforged 3D printing systems. That discussion has been turned on its head because you can pretty much do what you like now with the rules of additive manufacturing.”

3D printing 79

3D printing Composites Additive manufacturing Industry 4.0 79

Fabricating & Metal Work

AUGUST 25, 2022

In response to global trade disruptions, supply chain issues and widespread labor shortages, American manufacturers are increasingly turning to automation and robotics to achieve greater flexibility and relocate production closer to home. Further details on ABB’s IMTS 2022 exhibit: Main Booth North Hall (#236520).

Robotics 52

Robotics Robotics 3D printing Automation 52

Additive Manufacturing

JULY 20, 2022

Designed as the world’s first fully reusable, entirely 3D printed rocket, Terran R is pioneering a new class of reusable launch vehicles that will open new opportunities for space exploration and scientific research. To date, Relativity has signed a total of five customers for Terran R totaling more than $1.2B

3D printing 98

3D printing Supply Chain Logistics Aerospace 98

Gary Mintchell

DECEMBER 22, 2022

Zebra Technologies Corporation released the findings of its Automotive Ecosystem Vision Study which confirmed automotive manufacturers are under pressure to accommodate growing consumer demands for sustainability and transparency throughout the manufacturing process and fleet managers’ need for the digitization of operations and supply chain. .

Automotive 130

Automotive Supply Chain 3D printing Manufacturing 130

Fabricating & Metal Work

APRIL 22, 2024

It enables forecasting of consumer demand for every SKU, and its unique ability to engage in near-term demand sensing lets you create forecasts based on current supply chain conditions. AI can create a holistic view of demand across your entire enterprise by combining supply, sales, finance and marketing projections.

Supply Chain 52

Supply Chain Manufacturing Robotics Robotics 52

AU Manufacturing

OCTOBER 18, 2022

Konica Minolta Australia has announced the availability of the large format FX20 3D printer through its partner, Markforged , creator of the integrated metal and carbon fibre additive manufacturing platform, the Digital Forge. . The FX20 is the biggest, fastest, and most sophisticated 3D printer Markforged has ever produced.

Additive manufacturing 86

Additive manufacturing Supply Chain 3D printing Artificial Intelligence 86

Additive Manufacturing

AUGUST 3, 2022

NEW YORK (August 1, 2022) – An estimated six million patients have benefitted directly or indirectly from medical applications of additive manufacturing (AM) and 3D printing – from orthopedic and cranial implants to surgical guides and instruments to dental restorations and external prosthetics.

3D printing 52

3D printing Manufacturing Supply Chain Additive manufacturing 52

Fabricating & Metal Work

OCTOBER 26, 2022

At FABTECH 2022 , you’ll find all the key insights into the latest trends that are making an impact on the manufacturing industry this year, including 3D/additive manufacturing, cyber security, workforce/labor shortages and smart technology/IoT. Trend 4: Smart Technology / IoT.

Smart manufacturing 98

Smart manufacturing Additive manufacturing 3D printing Artificial Intelligence 98

AU Manufacturing

DECEMBER 13, 2022

Analysis of co-investment recipients reveals that manufacturers committed over two dollars ($2.30) of cash and in-kind contributions for every dollar of Federal funding. SA) – Recycling: Sovereign manufacturing of plastic-free wipes for medical, industrial, and personal use. million – treble that of the initial fund allocation.

Manufacturing 127

Manufacturing Beverage 3D printing Warehousing 127

AU Manufacturing

JUNE 15, 2023

SPEE3D has delivered its proprietary metal cold spray technology to the University of Applied Sciences Hamburg (HAW Hamburg) in Germany in a collaboration aimed at boosting additive manufacturing capabilities for students and the European community. HAW Hamburg’s Professor Dr.-Ing.

Additive manufacturing 52

Additive manufacturing Supply Chain Aerospace Form 52

Fastener News Desk

SEPTEMBER 1, 2022

Indianapolis, IN, USA (September 1, 2022) – Würth Industry North America (WINA), the leading industrial distributor of supply chain solutions for fasteners, MRO, and safety equipment, announced today three senior executive-level hires to support their divisional structure and position itself for continued rapid growth.

Supply Chain 52

Supply Chain 3D printing Automation Function 52

ATS

MAY 10, 2023

That component of the manufacturing industry outlook is derived from several underlying — and in some cases, ongoing — industry and macroeconomic factors that may threaten sustained growth in the near term. The following aspects of supply chain management have been identified as potential strategies to help improve these areas.

Manufacturing 52

Manufacturing Supply Chain Industry 4.0 Industry 4.0 52

ATS

SEPTEMBER 28, 2022

The digital shift is an important concern for the future of the manufacturing industry, but manufacturers must continue to focus on excellence in physical production. Hardware automation includes robots, cobots, autonomous vehicles and more, while software automation includes machine learning and artificial intelligence.

Manufacturing 52

Manufacturing Supply Chain Automation Robotics 52

Additive Manufacturing

AUGUST 5, 2022

History of The Additive Manufacturing Pavilion at IMTS. IMTS) International Manufacturing Technology Show. Hear from like-minded leaders discussing big data, digital twin, robotics, additive manufacturing and tour the show floor with an industry expert. . • Peter’s background and experience. •

Manufacturing 52

Manufacturing Additive manufacturing Robotics Robotics 52

Manufacturer's Monthly

JANUARY 9, 2023

To assist Australian manufacturers transition to high-value and locally competitive manufacturing, IMCRC set up four multidisciplinary research programs, the fundamentals of which have remained the same throughout the CRC’s tenure. UAP is embracing robotics, transitioning from a traditional workshop environment.

Manufacturing 83

Manufacturing Industry 4.0 Industry 4.0 3D printing 83

Manufacturer's Monthly

AUGUST 2, 2023

As the director of CSIRO’s Lab 22, Australia’s centre for additive innovation, I have witnessed the rapid and impressive growth of the additive manufacturing (AM) industry. Here, AM offers resilience, reduces dependency on global supply chains and has become increasingly valued as an enabling technology.

Additive manufacturing 68

Additive manufacturing Manufacturing Supply Chain Prototype  68

Mold Making Technology

SEPTEMBER 26, 2023

For example, MTE has been exploring additive manufacturing (AM), conformal cooling and 3D printing improvements. For MTE, an automated end of arm tooling (EOAT) robot has been the latest advancement added to the shop. The robot is linked to a new 500-ton Tederic injection mold machine that aids large part sampling.

Manufacturing 105

Manufacturing 3D printing Robotics Robotics 105

Trimantec

JANUARY 22, 2020

With this fixed order layout, it is easier to apply robotic automation and enhance the efficiencies at each stage. . . Benefits of manufacturing outsourcing: Avoids added expenses including those arising from additional workers, working space, supply chain management, and equipment acquisitions. 3D Printer.

Manufacturing 52

Manufacturing 3D printing Assembly Line Made-to-spec 52

Manufacturer's Monthly

MAY 22, 2023

Another company that ManuFutures has supported is Universal Motion Simulation (UMS), which develops and manufactures turnkey reconfigurable driver training simulation solutions for armoured vehicles. Let’s say, for Hanwha, we want to do some work in supply chain development.

Advanced manufacturing 61

Advanced manufacturing Supply Chain Manufacturing 3D printing 61

Modern Machine Shop

APRIL 10, 2023

I almost ran my car off the road, when you look at the supply chain, and be able to say, hey, each region, every country in the world today, we need to make sure that we secure our own interests. So it was really optimizing a supply chain, a low-cost supply chain.

Made-to-spec 98

Made-to-spec Supply Chain Logistics Manufacturing 98

Additive Manufacturing

APRIL 28, 2023

Dental laboratories are realizing a more than 50% boost in production efficiencies as the Oqton AI capability optimizes all critical additive manufacturing elements into a single workflow in the production environment. It is a technology that improves the end part quality and overall cost, enabling an increased adoption rate.

Additive manufacturing 52

Additive manufacturing Manufacturing 3D printing Aerospace 52

Additive Manufacturing

APRIL 28, 2023

Bringing together the capabilities of these companies and their products provides manufacturers with a complete end-to-end solution for additive manufacturing — addressing the challenges faced by many when adopting and implementing the technology.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Artificial Intelligence 52

Additive Manufacturing

OCTOBER 24, 2022

/October 24, 2022– Relativity Space unveiled the latest iteration of its first-of-its-kind proprietary manufacturing platform, Stargate 4th Generation metal 3D printers. Reduced print start time and cost is supported by an integrated approach to build setup and print plate preparation.

3D printing 75

3D printing Aerospace Supply Chain Automation 75

Fabricating & Metal Work

MARCH 25, 2024

Recognizing the critical role of job shops in the manufacturing industry, IMTS 2024 will feature three IMTS Elevate Job Shops workshops powered by AMT, Modern Machine Shop, and Additive Manufacturing Media. Workshop topics include “Make Your Shop a Top Shop,” “The Shop of Our Future,” and “3D Printing for Job Shops.”

Supply Chain 52

Supply Chain 3D printing Industry 4.0 Industry 4.0 52

Fastener News Desk

NOVEMBER 8, 2022

Linear ball screws are widely utilized in a variety of industries: from warehouse logistics robots and automotive power steering to aircraft aileron actuators — or even semiconductor wafer processing equipment stages. The durability of the printed part in the application really impressed our customer. Benefits of Working with 3DEO.

3D printing 52

3D printing Aerospace Prototype  Additive manufacturing 52

Manufacturer's Monthly

MARCH 8, 2023

There is also a growing resolve to foster national self-sufficiency and build local supply chains. One field that is of increasing interest to defence is additive manufacturing or 3D printing. As part of this, we operate one of Australia’s leading additive manufacturing research centres, Lab 22.

Advanced manufacturing 52

Advanced manufacturing Manufacturing Supply Chain Composites 52

Fabricating & Metal Work

AUGUST 15, 2023

This shock shattered the fragile supply chains of various manufacturing industries and even caused the halting of production lines in some cases. While normalcy is returning slowly, the industries have started reassessing their in-house manufacturing capabilities and are exploring various avenues to meet their needs.

Manufacturing 52

Manufacturing 3D printing Robotics Robotics 52

Mold Making Technology

DECEMBER 4, 2022

Additive Manufacturing. Additive Manufacturing. Mold in a Day Technology Slashes Tool Production, Eliminates Supply Chain Headache. Photo Credit: Next Chapter Manufacturing. New Metal 3D Printing System Accelerates Mold Insert Production. 1, 2022 to Nov. 28, 2022): Cutting Tools.

3D printing 98

3D printing Cycle time Automation Additive manufacturing 98

Mold Making Technology

SEPTEMBER 13, 2023

” AM Trends Glynn Fletcher, president of EOS North America , a provider of laser powder bed fusion technology exhibiting in the Additive Manufacturing (AM) Sector, says that some AM processes are transitioning from lower volume, higher value production to more medium-volume, cost-effective and mainstream production applications.

Manufacturing 52

Manufacturing Supply Chain 3D printing Warehousing 52