Mold Making Technology

FEBRUARY 1, 2024

Corey Alton Fox, operations manager for Accede Mold & Tool, is one of MMT 's new editorial advisory board (EAB) members. Photo Credit: Accede Mold & Tool Meet Corey Alton Fox. Corey is a seasoned professional and third-generation leader in the moldmaking industry.

Automotive 111

Automotive Manufacturing 111

E&T

MARCH 14, 2023

Heysham 1 and Hartlepool nuclear power stations (pictured) are now expected to close in March 2026 – two years later than previously forecast.

52

52

E&T

DECEMBER 14, 2022

However, the new consultation has been celebrated by the hydrogen lobby, which last month called on the government to do more to support the rapidly growing industry, including making it mandatory for all new boilers to support 100 per cent hydrogen by 2026.

Sourcing 105

Sourcing 105

E&T

OCTOBER 4, 2022

To support this, the body wants the government to set a target for 1,000,000 homes to be heated by hydrogen by 2035 as well as the 2026 targets for boilers. It is now pushing for a rapid scaling up of production, greater support for distribution and storage infrastructure, and the creation of demand in end-use sectors.

81

81

Canadian Manufacturing

OCTOBER 31, 2022

million by 2026. Robot arm 3D. CNW Newswire). SAN ANTONIO — Frost & Sullivan’s recent analysis suggests that the global robot-based metrology market will reach $396.2

Robotics 52

Robotics Robotics Industry 4.0 Industry 4.0 52

Canadian Manufacturing

AUGUST 9, 2023

To be built at the company’s new Richmond headquarters, this machine is designed to achieve fusion conditions of over 100 million degrees Celsius by 2025, and progress toward scientific breakeven by 2026. In addition, the company completed the first close of its Series F raise for a combined $25 million USD (approximately $33.5

Advanced manufacturing 52

Advanced manufacturing Manufacturing 52

E&T

NOVEMBER 14, 2022

The UK Space Agency (UKSA) has given two companies £4m to design a space clean-up mission that could launch as soon as 2026. . The winning prototype will track down and capture two defunct satellites already orbiting Earth, then cast them into the atmosphere where they will burn up.

Robotics 75

Robotics Robotics Prototype  Manufacturing 75

Design World

MARCH 7, 2024

The DOE expects up to 9,000 blades to be retired annually through 2026, and up to 20,000 will be retired annually by 2040. Department of Energy (DOE), more than 72,130 wind turbines and 210,000 blades were deployed as of July 2022.

147

147

Frost & Sullivan Manufacturing

JUNE 13, 2022

billion by 2026, registering a compound annual growth rate (CAGR) of 6.1%. Next-Generation 911: The Future of Public Safety—Forecast to 2026. The post Next-Generation 911 Annual Revenues in the United States to Surpass $1 Billion by 2026 appeared first on Frost & Sullivan. million in 2021 to $1.19 Contact: Sol Curet.

Artificial Intelligence 52

Artificial Intelligence Function Sourcing 52

Manufacturing & Logistics IT

JULY 22, 2020

According to a recent study from market research firm Global Market Insights, the inventory management software market is set to grow from its current market value of more than $5 billion to over $5 billion by 2026, gaining remarkable traction over the 2020 to 2026 period.

48

48

Seeburger

JANUARY 24, 2024

Update January 24, 2024: Belgium proceeds with mandatory B2B electronic envoicing from January 2026 Belgium is taking significant steps toward implementing a mandatory B2B structured e-invoicing system, with a target go-live date of January 1, 2026.

Electronics 98

Electronics 98

Mold Making Technology

FEBRUARY 5, 2023

Justin Jagels, the owner and president of J Squared Design Services LLC in Arkansas City, Kansas, is one of MMT 's new editorial advisory board members. Photo Credit: J Squared Design Services LLC Meet Justin Jagels.

Bottleneck 93

Bottleneck Composites Prototype  Aerospace 93

E&T

MARCH 5, 2024

From 2026, the European New Car Assessment Program (Euro NCAP) will introduce new testing rules that will require vehicles to have physical controls for basic functions like turn signals and windscreen wipers to earn a full five-star safety rating.

Function 116

Function 116

Mold Making Technology

JULY 13, 2023

Jenny Kotulak, project manager for Integrity Tool and Mold in Ontario, Canada, is one of MMT 's new editorial advisory board (EAB) members. Photo Credit: Integrity Tool and Mold Meet Jenny Kotulak. Today, Jenny is a lead project manager at Integrity Tool and Mold in Ontario, Canada.

Manufacturing 98

Manufacturing 98

Mold Making Technology

JANUARY 22, 2023

Mike Close, senior tooling engineer for SMC Ltd. in Deven, Massachusetts, is one of MMT 's new Editorial Advisory Board (EAB) members. Photo Credit: SMC Ltd. Meet Mike Close. Mike is a senior tooling engineer for medical device manufacturer SMC Ltd. headquartered in Somerset, Wisconsin.

3D printing 91

3D printing Automation Manufacturing 91

E&T

JANUARY 10, 2024

Nasa has confirmed it is delaying its manned mission to the Moon by a year to allow its teams to work through various operational challenges in a bid to make the journey as safe as possible.

52

52

Mold Making Technology

FEBRUARY 15, 2023

Isaac Trevino, business development manager for Best Tool & Engineering in Clinton Township, Michigan, is one of MMT 's new EAB members. Photo Credit: Best Tool & Engineering Meet Isaac Trevino. Isaac is the business development manager for Best Tool & Engineering (BTE) in Clinton Township, Michigan.

Industry 4.0 93

Industry 4.0 Industry 4.0 Prototype  Automotive 93

Mold Making Technology

JANUARY 11, 2024

Gabe English, president of Western Carolina Tool & Mold in Mills River, North Carolina, is one of MMT 's new editorial advisory board (EAB) members. Photo Credit: Western Carolina Tool & Mold Meet Gabe English. Gabe is a seasoned professional and the president of Western Carolina Tool & Mold located in Mills River, North Carolina.

Manufacturing 52

Manufacturing 52

Mold Making Technology

APRIL 23, 2023

Nicholas Vitelli, lecturer in engineering for the Plastics Engineering Technology Program at Penn State Erie, The Behrend College in Erie, Pennsylvania, is one of MMT 's new editorial advisory board members. Photo Credit: Penn State Erie, The Behrend College Meet Nicholas Vitelli.

Function 98

Function Manufacturing 98

E&T

DECEMBER 6, 2023

Air New Zealand has purchased an electric aircraft that will carry out postal deliveries across the country from 2026.

105

105

Mold Making Technology

DECEMBER 27, 2023

Marion Wells, owner of Human Asset Management, is one of MMT 's editorial advisory board (EAB) members. Photo Credit: Human Asset Management Get reacquainted with Marion Wells. Marion has been serving on MMT ’s editorial advisory board (EAB) since 2019.

Automotive 52

Automotive Manufacturing 52

Plastics Today

AUGUST 31, 2023

The 200,000-square-foot plant in Grand Blanc Township, MI, will begin supplying high-pressure hydrogen vessels to a major US automaker as soon as 2026.

104

104

Mold Making Technology

NOVEMBER 22, 2023

Camille Sackett, vice president of sales and marketing, Accede Mold & Tool , is one of MMT 's EAB members. Photo Credit: Accede Mold & Tool Get reacquainted with Camille Sackett.

Fit 59

Fit Manufacturing 59

Manufacturer's Monthly

APRIL 9, 2024

Works commenced in the first quarter of 2024 and are expected to finish in mid-2026. We are very pleased to be working with the Public Transport Authority, our partner ADCO, and contributing UGL’s extensive transport infrastructure experience,” said Santamaria.

Manufacturing 103

Manufacturing 103

Mold Making Technology

MAY 18, 2023

Corey Bratton, operations manager for Quality Mold Inc. in Erie, Pennsylvania, is one of MMT 's new Editorial Advisory Board (EAB) members. Photo Credit: Quality Mold Inc. Meet Corey Bratton. Corey oversees day-to-day operations at Quality Mold, including workflow, outsourcing, sales and some financials.

Fit 52

Fit Automotive Manufacturing 52

E&T

NOVEMBER 8, 2023

The scheme is expected to deliver 95GWh of heat between 2026 and 2040 to a new development area around Old Oak Common station.

90

90

Plastics News

NOVEMBER 16, 2022

Construction will begin immediately on the project in Orange, Texas, with operations expected to begin in 2026. The complex will add more than 4 billion pounds of capacity.

120

120

Seeburger

OCTOBER 18, 2023

UPDATE: Revised Timetable for Mandatory B2B E-Invoicing and B2C E-Reporting in France – Delay Until March 2026 expected France’s direction générale des Finances publiques (DGFiP) recently announced a significant update to its timetable for implementing mandatory B2B e-invoicing and B2C e-reporting.

98

98

Mold Making Technology

OCTOBER 5, 2023

Bob VanCoillie, senior manager of Consumer Mold Management CoE for Kenvue, part of the Johnson & Johnson Family of Companies, is one of MMT 's new editorial advisory board (EAB) members. Photo Credit: Kenvue, part of Johnson & Johnson. Meet Bob VanCoillie.

3D printing 52

3D printing Digital manufacturing Manufacturing 52

SMMT

JANUARY 5, 2024

Industry calls on government to halve EV VAT, to put more than a quarter of a million extra zero emission vehicles on the road and cut five million tonnes of CO2 by end of 2026. million new EVs on the road by the end of 2026. million new BEVs registered between 2024 and 2026. million base to 1.94

Automotive 145

Automotive Manufacturing 145

Gary Mintchell

FEBRUARY 13, 2023

By 2026, the APAC smart conveyance technology market is anticipated to be worth $450 million, ahead of $350 million for EMEA and $185 million for the Americas. The market is set to quadruple in size between 2020 and 2026 with a CAGR of 26.5%.

Automation 130

Automation Manufacturing 130

Mold Making Technology

APRIL 11, 2023

Adam Nartker, business development manager of plastic injection molds for Diversified Technologies International (DTI) in Livonia, Michigan, is one of MMT 's new Editorial Advisory Board (EAB) members. Photo Credit: Adam Nartker Meet Adam Nartker.

Function 52

Function Manufacturing 52

Mold Making Technology

NOVEMBER 7, 2023

James Jergens, general manager of Triangle Tool and Penn-Erie Tool, The Plastek Group, is one of MMT 's new EAB members. Photo Credit: The Plastek Group Meet James Jergens.

Lean manufacturing 52

Lean manufacturing Sourcing Manufacturing 52

Robotics Automation News

MARCH 8, 2023

The renewal extends the strategic partnership through 2026, and will continue to put union members in the driver’s seat of construction automation. Built Robotics, the inventor of the Exosystem, which os said to convert excavators into robots, has renewed its partnership with the International Union of Operating Engineers (IUOE).

Robotics 105

Robotics Robotics Automation 105

Plastics Today

APRIL 18, 2023

Sustainable alternatives for its entire polyamide 6 and 66 portfolios will be available by 2026.

104

104

Robotics Automation News

MAY 14, 2023

The serial production agreement will see Ouster supply Motional with Alpha Prime VLS-128 sensors through 2026. Motional, a specialist developer of driverless cars, has selected Ouster as the exclusive provider of long-range lidar sensors for its all-electric Ioniq 5-based robotaxis.

98

98

Metrology

FEBRUARY 7, 2024

A new era is dawning for BMW Group Plant Munich: from 2026, the iconic parent plant will produce the Neue Klasse sedan. The post BMW Transformation to E-Mobility Integrates Latest Metrology Automation Technology appeared first on Metrology and Quality News - Online Magazine.

Automation 52

Automation 52