Canadian Manufacturing

APRIL 2, 2025

The potential for point-of-need aluminum 3D printing spans a wide range of industries, from defense and energy sectors to remote communities where its cost-prohibitive to ship aluminum parts. The validated system will be available from Summer 2025.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Sourcing 52

Mold Making Technology

APRIL 8, 2025

But while reduced cycle times and improved part quality resulting from cooling advances were once the primary reason that AM made its way into moldmaking, 3D printing is now also being used to make molds for different reasons — including cost, lead time and feature complexity as I saw at this year’s Plastics Technology Expo, or PTXPO.

3D printing 52

3D printing Additive manufacturing Sourcing Cycle time 52

Mold Making Technology

NOVEMBER 2, 2024

Sources | Intralox, Michael Louris, MMT Welcome to the October roundup of must-read articles for the moldmaking industry! Source | Intralox Best Practices for Engraving Cores and Cavities Consider depth, font style, artwork size, polarity and location when engraving. Applications Open for the 2025 SPE Mold Technologies Div.

3D printing 52

3D printing Sourcing Automation Manufacturing 52

Frost & Sullivan Manufacturing

JANUARY 17, 2025

Disruptive Technologies Pioneering 3D Printing for Custom Heat Pump Components Revolutionizing heat pump manufacturing by employing 3D printing to produce bespoke components. These factors are reshaping the way heat pumps contribute to energy efficiency, climate goals, and global sustainability.

3D printing 52

3D printing Supply Chain Value chain Energy Solutions 52

Manufacturing Tomorrow

JUNE 19, 2025

Since they have minimal authority over mobile emissions sources like vehicles, air districts instead focus on stationary sources like boilers, engines, and industrial equipment, even though these account for a much smaller percentage of total emissions. Screen Shot 2025-06-18 at 3.34.52 Screen Shot 2025-06-18 at 3.35.27

Compliance 52

Compliance Automation Supply Chain Prototype  52

Manufacturing Tomorrow

JUNE 12, 2025

By processing data at its source, OptixEdge enables customers to unlock valuable insights, improve efficiency, and drive innovation across their operations."

Automation 52

Automation Industry 4.0 Industry 4.0 3D printing 52

Manufacturing Tomorrow

JUNE 10, 2025

and globally sourced materials, Cementex double-insulated pry bars are tested to 10,000 volts and rated for live use up to 1,000 VAC / 1500 VDC. The signature orange-over-yellow insulation offers clear visual safety indication, allowing users to both quickly identify wear and maintain compliance with stringent safety standards. with both U.S.

Beverage 52

Beverage Supply Chain 3D printing Automation 52

Frost & Sullivan Manufacturing

MARCH 4, 2025

As 2025 unfolds, the chemicals and materials industry is undergoing a seismic shift, where sustainability, digitalization, and supply chain resilience are no longer trends but imperatives. Meanwhile, raw material shortages and regulatory pressures are pushing businesses to rethink sourcing, production, and value creation at every level.

Supply Chain 52

Supply Chain Composites 3D printing Compliance 52

Manufacturing Tomorrow

JUNE 10, 2025

Knowing there is no one solution that fits all, the company strives to provide customers with innovative and reliable manufacturing technology solutions in an effort to be their single source provider.

3D printing 52

3D printing Automation Warehousing Industry 4.0 52

Manufacturing Tomorrow

JUNE 16, 2025

Turnkey actuator kits further streamline deployment by eliminating the need for separate component sourcing, programming, or integration. These critical elements support flight safety and transport functions, from the dependable deployment of landing gear and cargo doors to the smooth, ergonomic operation of seating for pilots and passengers.

Aerospace 52

Aerospace Cargo Automation Function 52

Modern Machine Shop

SEPTEMBER 13, 2024

Source: AMT - The Association for Manufacturing Technology The world’s leading additive manufacturing (AM) trade show is launching a U.S. based event in 2025 here in McCormick Place, the same venue as IMTS. However, it is more than just 3D printing. “We see huge potential in U.S.

3D printing 52

3D printing Value chain Rapid prototyping Manufacturing 52

Automation Mag

JANUARY 10, 2025

Announced at CES 2025 in Las Vegas, the program will reportedly enable new innovative companies to accelerate innovation, streamline development processes and scale faster by providing venture-related services, while reducing the cost of access to Siemens software and hardware.

Manufacturing 105

Manufacturing Rapid prototyping 3D printing Supply Chain 105

Mold Making Technology

FEBRUARY 16, 2025

Source (All images) | Standex Engraving Mold-Tech. Model-Tech is an ultrahigh-resolution 3D printed prototype skin that can be wrapped directly onto your model or prototype to accurately simulate a textured production part. Monitor key process parameters such as mold temperature and cycle times to minimize variability.

Function 69

Function Cycle time Prototype  3D printing 69

MESA

MAY 30, 2023

Nasdaq: SSYS) (“Stratasys” or the “Company”), a leader in polymer 3D printing solutions, today announced that its Board of Directors (the “Board”), after consultation with its independent financial and legal advisors, unanimously determined that the partial tender offer by Nano Dimension Ltd. billion in 2025 revenue.

3D printing 130

3D printing Additive manufacturing Form Manufacturing 130

Mold Making Technology

MARCH 5, 2025

Sources: Standex Engraving Mold-Tech, Cimatron, Incoe Corp., Peek Into PTXPO 2025 Profile Preview Part 1 of 4: Mold Builders Take a moment to get to know more about the mold-building exhibitors that will be showcasing a variety of products, technologies and services at PTXPO 2025. Read Now Source: Cimatron 7. Read Now 9.

3D printing 52

3D printing Prototype  Sourcing Compliance 52

Modern Machine Shop

APRIL 3, 2025

The Taipei International Machine Tool Show (TIMTOS) 2025 took place March 3-8 at Taipei Nangang Exhibition Center Halls 1 and 2, as well as Taipei World Trade Center Hall 1. This provides not only safety, but also traceability and can even become a source of data that can be analyzed to find efficiencies. Photos provided by MMS.

Cycle time 60

Cycle time Automation 3D printing Robotics 60

Modern Machine Shop

SEPTEMBER 13, 2024

“We attempted to do something that had never been done before: we 3D printed a car on-site, from scratch, with zero practice,” he answers. “The car was 3D printed, assembled, and driven out of the building on Saturday morning.” He hesitates and answers, “I really love the people involved.”

3D printing 52

3D printing Additive manufacturing Sourcing Manufacturing 52

Mold Making Technology

DECEMBER 19, 2024

Source | MMT Staff As we move through 2024, moldmaking continues to evolve, facing challenges and opportunities. Advancements in 3D printing for mold building, increased use of simulation software for mold flow analysis and implementation of five-axis machining and robotic molding are enhancing productivity.

3D printing 52

3D printing Robotics Robotics Sourcing 52

E&T

JUNE 19, 2025

First fully robotic heart transplant in the US performed without opening patient's chest Thu 19 Jun 2025 First fully robotic heart transplant in the US performed without opening chest Note to themers: _never_ hide the.teaser-utility-links div, please! Note to themers: _never_ hide the.teaser-utility-links div, please!

3D printing 52

3D printing Aerospace Prototype  Robotics 52

Frost & Sullivan Manufacturing

MAY 14, 2024

As a result, it sources recycled and renewable materials for products and packaging, aiming to eliminate 75% of single-use plastic by 2025.” The company considers published lists, customer preferences, regulations, and scientific analyses to avoid harmful materials. About HP HP Inc. For more information, please visit: hp.com.

3D printing 52

3D printing Electronics Sourcing 52

E&T

DECEMBER 2, 2022

million in 2025 and 31.1 Their PEM fuel cell can be 3D-printed or assembled from cheap printed circuit boards, which would enable manufacturing to be scaled up easily. The partly 3D-printed wind-tunnel model. Deloitte forecasts their numbers will grow from 2.5 million in 2020 to 11.2 million by 2030.

3D printing 85

3D printing Logistics Supply Chain Form 85

Additive Manufacturing

MAY 25, 2023

Billion in Revenue with Adjusted EBITDA Margin of 10%-12% in 2025 Stratasys and Desktop Metal Reaffirm Previously Provided Guidance Companies to Host Conference Call to Discuss Transaction Today at 8:30 A.M. billion in 2025 revenue, with significant upside potential in a total addressable market of more than $100 billion by 2032.

3D printing 52

3D printing Form Additive manufacturing Supply Chain 52

Modern Machine Shop

OCTOBER 9, 2024

Source (All Images) | Gardner Business Media Inc. One of the most interesting examples was the Astorino, a desktop sized 3D printed robot from Kawasaki that students can program using the same methods as industrial robots. Both will be returning in 2025. We’ll see you in 2025.

Robotics 52

Robotics Robotics Automation 3D printing 52

Fabricating & Metal Work

JUNE 11, 2024

CERATIZIT aims to increase the proportion of tungsten sourced from secondary raw materials across its entire product portfolio to more than 95% by 2020. The company aims to be carbon neutral by 2025 and is committed to reducing the use of virgin raw materials in its production processes.

Additive manufacturing 52

Additive manufacturing Aerospace Supply Chain Form 52

Dinesh Mishra

OCTOBER 11, 2024

Additionally, there is growing interest in additive manufacturing (3D printing), which is gaining traction for producing complex, lightweight components, especially in aerospace and defence industries. The market for CNC (Computer Numerical Control) machines is expanding rapidly, driven by the automotive and aerospace sectors.

Industry 4.0 52

Industry 4.0 Industry 4.0 Supply Chain Smart manufacturing 52

Modern Machine Shop

JUNE 8, 2025

MT Technology Series East 2025 (formerly known as EASTEC ) saw many companies showcasing machines, tooling, software and more that can meet the needs of broad audiences as well as very specific needs. Which is more valuable in manufacturing: broad capabilities, or deep specialization? It’s a thorny question with a simple answer.

Bill of Materials 85

Bill of Materials 3D printing Function Automation 85

Mold Making Technology

DECEMBER 17, 2024

Source | DMS 3D-Printed Hot Runner Nozzles Yield Consistent Temperature Profile Selective laser melting (SLM) metal 3D printing, combined with artificial intelligence (AI) produce DMS Monolith hot runner nozzles, tailored precisely to part and process specifications. Source | Incoe Corp. Trumpf Inc.

3D printing 52

3D printing Sourcing Process control Artificial Intelligence 52

Modern Machine Shop

AUGUST 4, 2024

Source: AMT A Hands-On Summit This year’s Summit will take place on Level 2 of the East Building, closer to the hustle and bustle of the main show itself. The mobile labs will offer students demonstrations of production technologies such as desktop machine tools and 3D printing.

Supply Chain 52

Supply Chain 3D printing Automation Robotics 52

CMTC Manufacturing Tech

MARCH 6, 2025

With 2025 underway, the manufacturing industry continues to evolve at a rapid pace, driven by advancements in technology, shifting workforce dynamics, and global supply chain disruptions. In this blog, well explore the key manufacturing trends shaping 2025 The Arrival of Industry 5.0 From the rise of Industry 5.0 Industry 5.0

Smart manufacturing 63

Smart manufacturing Manufacturing Artificial Intelligence Supply Chain 63

Frost & Sullivan Manufacturing

MAY 22, 2025

We also take a closer look at the most transformative forces expected to shape the future of airborne ammunition in 2025 and beyond. 3D printing is cutting production time and enabling component customization. In this article, we spotlight the ten crucial imperatives driving this evolution.

Supply Chain 52

Supply Chain Compliance 3D printing Artificial Intelligence 52

Robotics Business Review

FEBRUARY 21, 2025

Source: 1X Technologies For humanoid robots to become accepted parts of people’s daily lives, they’ll need to act in a human-like manner. 1X started 2025 by acquiring Kind Humanoid Inc., Source: 1X Technologies 1X said it designed NEO Gamma to be approachable and to complement living spaces rather than disrupt them.

Fit 107

Fit Robotics Robotics Artificial Intelligence 107

Robotics Business Review

MARCH 26, 2025

Source: igus GmbH From motion plastics to humanoid robots, igus GmbH has continued to innovate. It is offering a record number of 277 new lubrication-free motion plastics products for 2025. “We’ll be presenting at Hannover Messe 2025.” million sq. billion U.S.) in sales last year. billion U.S.)

Robotics 64

Robotics Robotics Automation Sourcing 64

Frost & Sullivan Manufacturing

MARCH 14, 2025

Even before 2025 ends, the landscape will have shifted dramatically, driven by digital disruption, supply chain complexities, and evolving customer demands. Download our comprehensive analysis, Top 10 Strategic Imperatives in Benchmarking of Franchised Service Dealerships, Americas, 2025 today.

Automotive 52

Automotive Supply Chain Benchmarking 3D printing 52

E&T

JUNE 17, 2025

In February 2025, City Hall set out proposals to pedestrianise Oxford Street. In May 2025, Khan announced that City Hall will “actively explore” releasing parts of the city’s green belt to build homes and address the housing crisis. Under the proposed changes, traffic will be banned for a 0.7-mile

3D printing 59

3D printing Sourcing Electronics Robotics 59

Mold Making Technology

MARCH 9, 2025

MMT @ PTXPO, Booth 1235 Our booth at PTXPO 2025 will be the perfect place to get to know us better, get to know each other and discover how MMT serves as the bridge to connect you to the latest industry innovations, strategies and solutions. The 2025 Plastics Technology Expo (PTXPO) is set to take place March 18-20 at the Donald E.

3D printing 69

3D printing Sourcing Cycle time Function 69