Design World

JUNE 24, 2024

At the 2024 Digital Transformation Forum in Boston, Design World sat down with Deloitte’s Asi Klein, managing director of industrial products and construction, and Matthew Fox, senior manager, to discuss trends in workforce development. Here’s a video of the discussion and a Q&A article below.

Manufacturing 147

Manufacturing 147

Robotics Business Review

OCTOBER 4, 2024

On September 25, 2024, Gree Intelligent Equipment and Universal Robots officially signed a strategic cooperation agreement in Zhuhai to establish a strategic partnership. Editor’s note: This article is reposted with permission from the author.

Robotics 116

Robotics Robotics Automotive Warehousing 116

E&T

MARCH 23, 2023

France has passed a controversial bill to trial AI-based surveillance cameras at the 2024 Olympic Games, despite the opposition of human rights activists. The period stated in the bill will run until the end of 2024 – well after the Games – and allow the technology to be used in championships like the Rugby World Cup later this year.

Artificial Intelligence 105

Artificial Intelligence 105

Robotics Business Review

AUGUST 10, 2024

Source: Schneider Electric Unveiled at MODEX 2024, the two new Lexium cobots offer payloads of 3 to 18 kg (6.6 Souce: Delta At Hanover Messe 2024, Delta Electronics Inc., Editor’s note: This article was syndicated from The Robot Report sibling site Engineering.com. Register now and save. mm (+/- 0.00079 in.)

Robotics 110

Robotics Robotics Sourcing Automation 110

Gary Mintchell

FEBRUARY 1, 2024

Here is the last of the prediction articles I picked up in December but had too much news to pack in. We expect this trend to reach a new height in 2024, leading to greater adoption of IIoT tools and an increased demand for AI analytics. Usually November and December are void of news.

Manufacturing 130

Manufacturing Artificial Intelligence Form Automation 130

Polytron

DECEMBER 13, 2023

Polytron is a member of the System Integrator Hall of Fame having been awarded in 2015, 2019, and now 2024. To read the full article go to Control Engineering at [link] The post Polytron Awarded 2024 System Integrator of the Year appeared first on Polytron.

Supply Chain 98

Supply Chain Smart manufacturing Automation Sourcing 98

Robotics Business Review

JANUARY 6, 2024

CMR Surgical aims to accelerate robot adoption CMR Surgical said it plans to launch new technologies to further support the utilization of Versius in 2024. Editor’s note : This article was syndicated from MassDevice , a sibling site to The Robot Report. There have been more than 140 around the world to date.

Robotics 105

Robotics Robotics Sourcing 105

Manufacturing Tomorrow

JUNE 17, 2025

Headquartered in Milwaukee, Wisconsin, Rockwell Automation employs approximately 27,000 problem solvers dedicated to our customers in more than 100 countries as of fiscal year end 2024. Advanced Manufacturing and Factory Automation Login Partner Login If you do not have a ManufacturingTomorrow partner account, please register - its free!

Automation 52

Automation Prototype  3D printing Industry 4.0 52

Modern Machine Shop

DECEMBER 26, 2024

As 2024 draws to a close, it is great to look back on the articles that piqued our audience’s interests the most. Here, we have compiled a list of the top ten most-viewed articles of 2024.

Sourcing 40

Sourcing Manufacturing Automation 40

Mold Making Technology

AUGUST 3, 2024

Welcome to our July roundup of must-read articles! We've carefully curated the top articles that captivated our audience, ensuring you stay informed and inspired. MMT Chats: Award-Winning 2024 Mold Apprentice of the Year Adam Conley of Omega Tool Inc. MTD) Mold Maker of the Year award. MTD) Mold Designer of the Year.

Sourcing 52

Sourcing Supply Chain Manufacturing 52

Robotics Business Review

FEBRUARY 3, 2024

J&J now plans to submit Ottava for FDA investigational device exemption (IDE) in the second half of 2024 in order to start clinical trials. In November 2023, J&J finally broke its silence , saying that it plans to submit Ottava for FDA investigational device exemption (IDE) in the second half of 2024 to initiate clinical trials. “We

Robotics 128

Robotics Robotics Sourcing Fit 128

Mold Making Technology

AUGUST 28, 2024

As August comes to a close, we've gathered this month's most viewed articles with valuable insights for moldmaking professionals. These articles and more on this list offer practical knowledge to enhance your operations. These articles and more on this list offer practical knowledge to enhance your operations.

3D printing 52

3D printing Sourcing Cycle time Prototype  52

Robotics Business Review

JANUARY 4, 2025

This trial, conducted in August 2024, focused on assessing the robot’s capabilities in handling delicate sheet-metal components. Figure AI won a 2024 RBR50 award for its rapid pace of innovation. Notably, Brightpick was recognized as the 2024 RBR50 Application of the Year winner. Be sure to check them out.

Automation 64

Automation Robotics Robotics Manufacturing 64

Canadian Manufacturing

DECEMBER 4, 2024

says they have developed proprietary manufacturing technology aimed at producing compostable containers, thinned-walled multi-layer articles, and high-strength connections between compostable materials while meeting international standards. WINDSOR — NEXE Innovations Inc. Highlights of the NEXE IP portfolio include: U.S.

Beverage 59

Beverage Form Manufacturing 59

Manufacturing Tomorrow

JUNE 17, 2025

Additional factors that could cause such differences can be found in our Annual Report on Form 10-K for the fiscal year ended August 31, 2024, and our other filings with the Securities and Exchange Commission. We assume no obligation to update these forward-looking statements. Discover more at www.jabil.com.

Supply Chain 52

Supply Chain Manufacturing Prototype  Automation 52

Manufacturing Tomorrow

JUNE 12, 2025

Headquartered in Milwaukee, Wisconsin, Rockwell Automation employs approximately 27,000 problem solvers dedicated to our customers in more than 100 countries as of fiscal year end 2024. Advanced Manufacturing and Factory Automation Login Partner Login If you do not have a ManufacturingTomorrow partner account, please register - its free!

Automation 52

Automation Industry 4.0 Industry 4.0 3D printing 52

Robotics Automation News

NOVEMBER 20, 2023

As we enter 2024, it’s crucial for retailers to stay ahead of the curve and leverage the latest inventory management technologies to streamline operations, increase efficiency, and drive profitability.

111

111

Mold Making Technology

JANUARY 30, 2024

Source: (top left) Boucherie, (top right) TK Mold & Engineering, (bottom left) Emuge-Franken, (bottom right) Plastic Ingenuity The top ten most-viewed articles in January were not only a testament to what our readers took an interest in—they reflect what is trending in our small but mighty world of moldmaking. Dapra Corp.,

Sourcing 52

Sourcing 3D printing Lead Time Supply Chain 52

Mold Making Technology

MARCH 5, 2025

From workflow efficiencies to cutting-edge tooling strategies, this roundup highlights the top articles that made an impact last month. Moldmakers Can Join the DOD’s Mapping Initiative The DOD's 2024 mapping initiative offers U.S. Read Now 6. Unlocking Defense Contracts: How U.S. Read Now Source: LSI Solutions 5.

3D printing 52

3D printing Prototype  Sourcing Compliance 52

Seeburger

OCTOBER 31, 2024

In EU NIS2 (2022/2555), Articles 20 (Governance), 21 (Measures) and 23 (Reporting deadlines to the cyber security coordination centre in the relevant EU member state) are […]

52

52

Manufacturer's Monthly

DECEMBER 4, 2024

Images: AMGC Recently, I penned a short article on Australian manufacturing and its latent potential. According to the Reserve Bank of Australia in its 2024 Composition of the Australian Economy, the Resource Sector accounts for over 60 per cent of exports – manufacturing represents just eight per cent.

Manufacturing 97

Manufacturing Food Production Composites Advanced manufacturing 97

Mold Making Technology

FEBRUARY 11, 2024

The uncertainty is expected to persist in 2024, with The Economist describing it as a "second cold war" and "multipolar disorder." The article highlights the growing pressure on manufacturers to advance productivity, given the substantial rise in labor costs. Check out the full article here.

Automation 59

Automation Supply Chain Robotics Robotics 59

The Fabricator

JANUARY 11, 2024

Applications are open through June 30, 2024, at www.amtonline.org/article/reshoring-award for the 2024 National Metalworking Reshoring Award.

49

49

Metrology

APRIL 17, 2024

The post Control Expo 2024 Preview #1 appeared first on Metrology and Quality News - Online Magazine.

52

52

Control Engineering

SEPTEMBER 12, 2023

Learning Objectives Learn about what Control Engineering subscribers need to do their jobs better, what articles they liked best and their about how to automate. By now many are well into planning 2024 automation and controls optimization projects, and Control Engineering research results and advice can help.

Automation 52

Automation Artificial Intelligence Compliance Robotics 52

Snic Solutions

OCTOBER 1, 2024

Manufacturing leaders going from 2024 into 2025 face unprecedented challenges. This article provides practical steps for transforming operations by utilizing data, improving IT-business collaboration, and attracting the talent necessary for innovation.

Manufacturing 52

Manufacturing 52

Robotics Business Review

FEBRUARY 20, 2025

Food and Drug Administration (FDA) in October 2024. Editor’s Note: This article was syndicated from The Robot Report sibling site MassDevice. Versius provides precision for multiple instruments CMR Surgical designed Versius to assist surgeons with minimally invasive procedures involving the lungs, thymus, and esophagus.

Robotics 76

Robotics Robotics Fit Sourcing 76

Robotics Business Review

JULY 15, 2024

markets in the second half of 2024. Editor’s Note: This article was syndicated from The Robot Report’s sibling site MassDevice. Last month, orthopedics device giant Zimmer Biomet entered into a limited distribution agreement to integrate ZB technology into a customized TMINI.

Robotics 111

Robotics Robotics Sourcing Manufacturing 111

Robotics Business Review

FEBRUARY 16, 2024

About a year ago, Stryker suggested that the robotic platform would have significant application expansions in 2024. The company said it expected a Mako Spine launch in the second half of 2024, with Mako Shoulder out by the end of 2024. Stryker said it plans to continue developing Mako’s capabilities this year.

Robotics 119

Robotics Robotics Form Sourcing 119

Robotics Business Review

NOVEMBER 8, 2024

Source: Agility Robotics We’ll be talking more about these topics at the 2024 Conference on Robot Learning ( CoRL ) next week in Munich, Germany. Editor’s note: This article was syndicated, with permission, from Agility Robotics’ blog. About the author Pras Velagapudi is the chief technology officer at Agility Robotics.

Robotics 115

Robotics Robotics Sourcing Function 115

Robotics Business Review

MARCH 3, 2024

Notably, MIRA went to space last month, with NASA awarding a grant to use the system on a 2024 technology demonstration mission. It plans for gynecological procedures in 2024. Editor’s Note: This article was syndicated from The Robot Report’s sister site MassDevice. It expects first-in-human uses outside the U.S.

Robotics 126

Robotics Robotics Sourcing 126

Robotics Business Review

JANUARY 23, 2024

It is our hope for a 2024 launch, but they are ultimately the arbiters of when we get clearance,” CEO Gary Guthart said during an evening earnings call with analysts. Register now for the 2024 Robotics Summit. Editor’s Note: This article was republished from sister website MassDevice.

Robotics 129

Robotics Robotics Manufacturing 129

Frost & Sullivan Manufacturing

MARCH 26, 2024

Three months into 2024, we’re traversing a world where conflicts intensify, and uncertainty seamlessly intertwines with our daily lives. This article considers some key factors that are shaping the evolving defense landscape. Zelensky intends to produce 1 million FPV drones in 2024 in Ukraine.

Artificial Intelligence 59

Artificial Intelligence Function Manufacturing Aerospace 59

Automation Mag

APRIL 25, 2024

As manufacturers plan for 2024, industrial automation continues to evolve rapidly, driven by advancements in artificial intelligence, robotics, IoT (Internet of Things) and data analytics. As McKinsey and Company stated in January 2024, “AI could contribute to the manufacturing sector a whopping annual impact ranging from $1.2

Automation 59

Automation Supply Chain Manufacturing Artificial Intelligence 59

Robotics Business Review

SEPTEMBER 27, 2024

UR said the increased payload capacities for both models will become the standard option in the future starting on October 15, 2024 with the launch of PolyScope 5.19. In Q2 2024, Teradyne said the UR20 and UR30 heavy-duty cobots accounted for more than 20% of UR’s sales. If we learn more information, this article will be updated.

Robotics 115

Robotics Robotics 115

Robotics Business Review

FEBRUARY 23, 2024

Anyware Robotics is launching an autonomous trailer unloading solution, that will make its debut at MODEX 2024. The mechanism consists of a mobile manipulator that includes a Fanuc CRX 25iA cobot mounted on top of a custom-built, omnidirectional AMR base.

Robotics 126

Robotics Robotics Automation Logistics 126

Robotics Business Review

FEBRUARY 1, 2024

30, 2024 with the spaceMIRA from Virtual Incision onboard. The National Aeronautics and Space Administration (NASA) awarded the grant to use the miniaturized robotic-associated surgery (RAS) platform on the 2024 technology demonstration mission. NASA broadcasted the launch of the spacecraft carrying MIRA.

Robotics 124

Robotics Robotics Cargo Sourcing 124