Robotics Business Review

DECEMBER 26, 2023

We covered 25 acquisitions in 2023, which was down significantly from the 50 we covered in 2022. Here’s a look back at the notable acquisitions of 2022 and 2021. Note that there’s one major acquisition still pending from 2022. Amazon announced in August 2022 its intent to acquire iRobot for $1.7

Robotics 132

Robotics Robotics Logistics Automation 132

Additive Manufacturing

NOVEMBER 18, 2022

Ottawa, Ontario/November 17, 2022 — Aiming to improve the performance and productivity of metal additive manufacturing, Morf3D Inc. This includes sourcing and qualifying materials with advanced properties. and Equispheres Inc. Behrang Poorganji, Vice-President, Materials Technology with Morf3D.

3D printing 98

3D printing Additive manufacturing Aerospace Automotive 98

AU Manufacturing

MARCH 20, 2023

Minister for Mining and Industry Nicole Manison announced that recent data found the cost of critical minerals exploration in the Northern Territory increased by about 30 per cent in 2022 to $198.6 million –up from $153.4 million in 2021. The findings also showed that at $82.7

Aerospace 84

Aerospace Sourcing Manufacturing 84

Fastener News Desk

SEPTEMBER 22, 2022

Q2 2022 Revenues of $429 million, up 22% from Q2 2021. Q2 2022 GAAP EPS of $0.08 YTD 2022 Revenues of $847 million, up 19% from YTD 2021. NASDAQ: PKOH) today announced its results for the second quarter of 2022. million in the second quarter of 2022, an increase of 22% from $350.0 Net sales were $428.6

Supply Chain 52

Supply Chain Automotive Logistics Aerospace 52

Robotics Business Review

FEBRUARY 15, 2024

Source: IFR The International Federation of Robotics, or IFR, today listed its picks for the top five global robotics trends of this year. million units in 2022. million units in 2022. In its latest release , the federation cited some different trends than it had for 2022 and 2023.

Robotics 130

Robotics Robotics Artificial Intelligence Automotive 130

Frost & Sullivan Manufacturing

NOVEMBER 12, 2022

More companies are becoming increasingly aware that their supply chain and sourcing decisions have a critical impact not just on the environment, but on society as well. The supply chain is a major source of Scope 3 emissions. transport of supplies and products, business travel, and product disposal). To rawatch her session, visit bit.ly/marcom-frost.

Supply Chain 98

Supply Chain Assembly Line Artificial Intelligence Value chain 98

Manufacturer's Monthly

NOVEMBER 29, 2022

At the Perth launch in October, 2022 Richard Elving, Markforged’s senior director for Asia Pacific, said the parlous state of global logistics made it imperative for Australian manufacturers to become more self-sufficient. The benefits of thinking outside the traditional manufacturing box can be seen all around the world.

Manufacturing 98

Manufacturing 3D printing Supply Chain Prototype  98

Modern Machine Shop

DECEMBER 20, 2023

These harmonics always exist, and Schmitz notes that understanding the source of milling harmonics and their relationship to vibration can help improve parameter selection. 5 Tips for Running a Profitable Aerospace Shop. If you’re looking for more of Modern Machine Shop’s top content, here are 2022’s top articles.

Aerospace 98

Aerospace Automation Form Sourcing 98

Manufacturer's Monthly

AUGUST 3, 2022

Two months out from the event the Land Forces 2022 industry presence is already larger than that of Land Forces 2021, which attracted 718 participating exhibitor companies and 12,766 attendances from industry, government and defence over its three days in June last year.

Artificial Intelligence 98

Artificial Intelligence Supply Chain Sourcing Prototype  98

Robotics Business Review

FEBRUARY 1, 2024

Source: NASA Virtual Incision’s MIRA surgical robot system has made it to the International Space Station (ISS). Lincoln, Nebraska–based Virtual Incision received a grant in 2022 for the MIRA platform to be used in a technology demonstration aboard the ISS. 30, 2024 with the spaceMIRA from Virtual Incision onboard.

Robotics 124

Robotics Robotics Cargo Sourcing 124

HGR Inc.

NOVEMBER 11, 2022

Paul Wiseman | Nov 10, 2022 | IEN. Bill Koenig | Nov 10, 2022 | SME. Respondents were in industries including machinery, electrical equipment, aerospace, and automotive. Manufacturing Tomorrow | Nov 9, 2022 | Manufacturing Tomorrow. Ryan Secard | Nov 4, 2022 | Industry Week. Consumer Inflation Eased to 7.7%

Manufacturing 90

Manufacturing Supply Chain Artificial Intelligence Electronics 90

Robotics Business Review

JANUARY 31, 2024

Source: NASA/JPL-Caltech NASA’s Ingenuity helicopter’s time on Mars came to an end last week. It announced in 2022 that it would be swapping out its Sample Fetch Rovers for two drones for the Mars Sample Return campaign. On April 8, 2022, Ingenuity covered a distance of 2,310 feet (704 meters) at a speed of 12 MPH (5.5

Robotics 120

Robotics Robotics Sourcing Aerospace 120

Dinesh Mishra

AUGUST 4, 2022

Bengaluru, August 4th, 2022: Commemorating their decade-long service to the Indian Electronics industry , IPC India brought together players to deliberate on the industry’s future. The members serve various vertical industries like defense, automotive, healthcare, aerospace, telecom, ICT, power, railways and broadcasting.

Electronics 98

Electronics Manufacturing Supply Chain Automotive 98

Fabricating & Metal Work

NOVEMBER 16, 2024

The Miller Auto DeltaWeld System is a MIG/flux-cored, pulsed-capable power source designed for cobots. This makes the process easier and faster compared to systems where welders must go back and forth between the teach pendant and the power source. Beacon, a Hirebotics smartphone app, now controls the entire cobot welding setup.

Robotics 52

Robotics Robotics Automation Sourcing 52

Fastener News Desk

MARCH 17, 2023

2022 data indicates that, on average, buyers consider three vendors, only one of which succeeds in winning the deal.” Forrester’s Buyers’ Journey Survey, 2022, reveals that 83% of buyers were dissatisfied in one or more areas with the winning vendor. The industrial fastener market size has been valued at USD 91.73 billion in 2002.

Aerospace 52

Aerospace Sourcing Automotive Manufacturing 52

Additive Manufacturing

JULY 28, 2022

July 27, 2022 (GLOBE NEWSWIRE) — While companies across the world rise to the challenges affecting supply chains, a transformation in technology and innovation is shifting the manufacturing paradigm. SOURCE: Northrop Grumman. FALLS CHURCH, Va., 3D Printing in Action.

3D printing 98

3D printing Additive manufacturing Cycle time Supply Chain 98

Fastener News Desk

OCTOBER 4, 2022

October 3, 2022. When serving industries like medical technology, semiconductor manufacturing, and automotive and aerospace engineering, a meticulous quality management system is key. The Sunnyvale-based company celebrates its 60 th anniversary in 2022. RELATED CONTENT: The 2022 Industrial Distribution Big 50: The Top 10.

Quality Management System 52

Quality Management System Aerospace Automotive Sourcing 52

E&T

OCTOBER 11, 2022

per cent of those working in engineering occupations are women (source: Engineering UK). Now, as my year comes to an end, I’m looking forward to seeing what the next year brings for the 2022 Young Woman Engineer of the Year!”. It has been an honour. Registration is now open for the awards.

Robotics 97

Robotics Robotics Aerospace Function 97

Robotics Business Review

MAY 23, 2025

Source: The ARM Institute The board of the Advanced Robotics for Manufacturing, or ARM, Institute yesterday said it has appointed Jorgen Pedersen, an experienced robotics and manufacturing executive, as CEO, effective June 17, 2025. for $100 million in 2022. Pedersen will succeed Ira Moskowitz in the role. Outgoing CEO Ira Moskowitz.

Robotics 52

Robotics Robotics Artificial Intelligence Manufacturing 52

Modern Machine Shop

MARCH 4, 2025

Source: Open Mind Technologies A Tale of Two Facilities With a skilled workforce of over 850 employees spanning 14 manufacturing facilities across the Northeast U.S. MMG acquired two of its divisions in 2022: Little Enterprises North (Whitefield, Maine) and Evans Industries (Topsfield, Massachusetts).

Cycle time 86

Cycle time Sourcing Aerospace Robotics 86

Additive Manufacturing

AUGUST 27, 2022

10, 2022 — TriTech Titanium Parts was launched on April 5, 2022. According to its President, Bob Swenson, TriTech is a spin-off of his former company, AmeriTi Manufacturing, which was sold to Kymera International also on April 5, 2022. DETROIT, Aug. “Every part we make is custom-made.”

Rapid prototyping 52

Rapid prototyping 3D printing Prototype  Fit 52

i4.0 today

OCTOBER 27, 2022

stands for “Jetted Additively Manufactured Electronics Sources,” the authoritative leader in advancing the development of AME, announced today the giveaway of the most innovative software in electromagnetic (EM) and electronics simulation. The registration period is from October 27th, 2022 until December 6th, 2022. on LinkedIn.

3D printing 52

3D printing Electronics Additive manufacturing Sourcing 52

Fastener News Desk

DECEMBER 5, 2022

CLEVELAND (PRWEB) NOVEMBER 21, 2022. These advanced technologies have propelled them into many cutting-edge industries, such as aerospace, alternative energy, automotive, industrial commercial, construction, high performance, military, and power generation. The State of B2B Ecommerce: 2022 Trend Report.

Supply Chain 52

Supply Chain Aerospace Automotive Function 52

Frost & Sullivan Manufacturing

SEPTEMBER 20, 2022

20, 2022– As the aviation industry recovers after a period of flight restrictions, optimism surrounds the commercial aircraft tire market. Source renewable materials for manufacturing and adopt environmentally friendly recycling processes to achieve sustainability goals and gain the upper hand over competitors. San Antonio –Sept.

Aerospace 52

Aerospace Artificial Intelligence Compliance Automation 52

AU Manufacturing

NOVEMBER 24, 2022

At the Perth launch in October 2022 Richard Elving, Markforged’s Senior Director, Asia Pacific, said the parlous state of global logistics made it imperative for Australian manufacturers to become more self-sufficient. . The benefits of thinking outside the traditional manufacturing box can be seen all around the world.

Supply Chain 69

Supply Chain Manufacturing 3D printing Prototype  69

Dinesh Mishra

MARCH 21, 2023

Research Centre Imarat (RCI) is a premier laboratory of Dr APJ Abdul Kalam Missile Complex, DRDO spearheading R&D in a wide range of Avionics Systems for diversified defence and aerospace applications. “ 333 crores for the financial year 2022. CUMI’s consolidated revenue is Rs. 3300 crores and PAT of Rs.

Aerospace 52

Aerospace Composites Manufacturing Sourcing 52

Fabricating & Metal Work

DECEMBER 20, 2022

A reduction in energy usage, lower carbon dioxide emissions, closed-loop recycling — and even customer demands regarding ethical material sourcing — are of critical importance in meeting goals. A focus on sustainable practices was named as a priority issue in the December 2022 MLC report, Sustainability and the Circular Economy.

Industry 4.0 105

Industry 4.0 Industry 4.0 Compliance Supply Chain 105

Fabricating & Metal Work

FEBRUARY 15, 2023

CERATIZIT presented an ambitious sustainability strategy during AMB – The International Exhibition for Metalworking 2022 in Stuttgart, Germany. Additionally, CERATIZIT guarantees low-carbon manufacturing by using low-emission production processes and energy sources as well as short transport routes throughout the entire process chain.

Value chain 96

Value chain Supply Chain Aerospace Automotive 96

Modern Machine Shop

APRIL 22, 2024

Source: MetalQuest From the earliest days of automation at IMTS featuring a robot hand moving parts, there has been a massive evolution in technology. Source: AMT. Source: AMT. Incodema3D focuses on additive manufacturing technology for aerospace, defense and other industries. “What is the definition of automation?”

Automation 98

Automation Robotics Robotics Artificial Intelligence 98

Fastener News Desk

APRIL 20, 2024

billion in 2022 and is estimated to reach $151 billion by 2032, growing at a CAGR of 4.6% Download Sample Pages of Research Overview: [link] Report coverage & details: Report Coverage Details Forecast Period 2023–2032 Base Year 2022 Market Size In 2022 $97.2 from 2023 to 2032. from 2023 to 2032.

Automotive 52

Automotive Aerospace Electronics Sourcing 52

Fastener News Desk

JANUARY 17, 2023

Fastener Distributor Index (FDI) – December 2022. Würth Group closes 2022 fiscal year with 19.95 Würth Group closes 2022 fiscal year with EUR 19.95 Bossard Group Reports New records in a challenging environment, Sales financial year and fourth quarter 2022. but improved modestly vs. last month. billion Euros in sales.

Aerospace 52

Aerospace Logistics Electronics Supply Chain 52

Additive Manufacturing

JANUARY 6, 2023

MELBOURNE, Australia/December 20, 2022 — SPEE3D announced its WarpSPEE3D printer will be hosted at the Nupress headquarters in Australia, giving access to the printer without having to lease or purchase it. The subscription model offers one to six slots, each delivering 25 hours per month of printing for 12 months.

Supply Chain 52

Supply Chain Manufacturing Prototype  Additive manufacturing 52

Modern Machine Shop

JULY 6, 2023

High Precision, High Requirements Temco is a precision machining company that operates in the aerospace, defense and commercial markets, among others. They were also able to better schedule out when operators needed to hit confirmations, eliminating a common source of downtime. Images courtesy of FANUC America.

Cycle time 98

Cycle time Aerospace Sourcing Manufacturing 98

MESA

MAY 30, 2023

About Stratasys Stratasys is leading the global shift to additive manufacturing with innovative 3D printing solutions for industries such as aerospace, automotive, consumer products, healthcare, fashion and education. You may obtain free copies of these documents from Stratasys using the sources indicated above.

3D printing 130

3D printing Additive manufacturing Form Manufacturing 130

Canadian Manufacturing

JUNE 21, 2023

“At Airbus, our vision is to transform the future of the aerospace industry by pushing the boundaries of innovation and sustainability. We are committed to creating leading-edge aerospace solutions that meet our customers’ needs, while reducing our environmental footprint.

Aerospace 40

Aerospace Assembly Line Supply Chain Sourcing 40

Additive Manufacturing

SEPTEMBER 22, 2022

AUSTIN, Texas, September 20, 2022 — Essentium, Inc. Sourced primarily from recycled bottle caps, their recycled filaments come in both unfilled and carbon fiber-filled versions. This makes them a great choice for automotive, aerospace, biomedical, and packaging applications. Said Blake Teipel, Ph.D.,

3D printing 52

3D printing Additive manufacturing Aerospace Automotive 52

E&T

DECEMBER 22, 2022

The UK's Jet Zero strategy, published in July 2022, aims to accelerate the development of SAF production plants in the UK, helping the government to achieve its aim of having at least five commercial SAF plants under construction in the UK by 2025.

Form 102

Form Sourcing Aerospace 102