AU Manufacturing

AUGUST 30, 2022

I wanted to create a furniture company and manufacturing process where environmental responsibility was built in from the start – to create products than were born green – rather than trying to re-engineer existing or traditional methods,” says Steven Higgs, Founder of E9 Design, and a veteran of the Australian furniture industry. . “And

Manufacturing 98

Manufacturing Fit Form 98

E&T

FEBRUARY 9, 2023

This line dates back to the 19th century, and so its tracks have track gauges narrower than the standard 1,435mm (4ft 8.5in), something that the manufacturer failed to notice in the designs. CAF, the Basque manufacturer in charge of the construction of the trains, first raised concerns about the sizing in March 2021.

Fit 81

Fit Sourcing Manufacturing 81

Manufacturer's Monthly

NOVEMBER 9, 2022

Updated rankings, based on 2020 export data, were released in August and they brought little in the way of better news. Absent of the resource riches that we enjoy; they’ve had to manufacture their own luck. m, explaining how productive knowledge fits into it. Manufacturing is the answer. What does it mean?

Advanced manufacturing 98

Advanced manufacturing Manufacturing Value chain Fit 98

Robotics Business Review

OCTOBER 21, 2024

This sensor, featuring ISO flanges on both sides, is a perfect fit for the UR20 and UR30 models,” said Susanne Noerdinger, the head of ecosystem success for Europe, the Middle East, and Africa (EMEA) at Universal Robots. “It

Robotics 119

Robotics Robotics Fit Sourcing 119

AU Manufacturing

OCTOBER 30, 2022

The Western Australian government has commissioned a study into the feasibility of establishing a local wind turbine components manufacturing industry. . The study is part of WA’s efforts to diversify the economy, enhance manufacturing capabilities and create jobs of the future, the government said in a press release. .

Manufacturing 59

Manufacturing Supply Chain Logistics Fit 59

MEM

APRIL 6, 2023

Matthew Boyt, Managing Director of CR Engineering in Wotton Underwood near Aylesbury bought the company from his previous employer in 2020 and since then has had a programme of investment in XYZ Machine Tools to keep up with demand. Matthew Boyt says, “This is my dream machine, and it would not fit in our previous factory.

Fit 98

Fit Form Manufacturing 98

Additive Manufacturing

DECEMBER 7, 2022

Within additive manufacturing, there is a big focus on part and application qualification. In March of 2020, the Department of the Navy published Marine Corps Order 4700.4 related to the Additive Manufacturing Policy. This takes time and requires a collaborative effort amongst OEMs, users, and research institutes.

Additive manufacturing 98

Additive manufacturing 3D printing Manufacturing Supply Chain 98

Modern Machine Shop

FEBRUARY 9, 2025

Granite State Manufacturing’s two five-axis Soraluce machines enable the shop to maintain tight tolerances on several large weldments and help the shop keep up with a steady workflow: two systems per year for Virginia-class submarines and one system per year for Columbia-class submarines.

Fit 52

Fit Manufacturing Automation 52

AU Manufacturing

JULY 28, 2022

We want the Parramatta Light Rail to be one of the safest and most reliable public transport systems in Australia, so the Bosch collision warning system is a perfect fit for us,” said Ramon Muntada, CAF TE Area Manager. Not only will it benefit the drivers of the light rail vehicles, but it will also help to reduce accidents.”.

Artificial Intelligence 120

Artificial Intelligence Electronics Function Fit 120

Additive Manufacturing

APRIL 18, 2023

Solukon has equipped the SFM-AT1000-S with an optimized swivel arm for parts manufactured with the NXG XII 600 from SLM Solutions. The machine is used to manufacture particularly large and heavy metal parts, which places high demands on industrial depowdering in turn. The NXG XII 600 is the gold standard in industrial 3D printing.

Fit 52

Fit 3D printing Automation Additive manufacturing 52

AU Manufacturing

MARCH 23, 2023

Express 5 is the largest vessel, by volume, that Austal has ever constructed, and to deliver this new high-speed ferry despite the impact of the COVID pandemic over 2020 – 2022, and Super Typhoon Rai in 2021, is simply outstanding,” Gregg said.

Fit 98

Fit Manufacturing 98

Canadian Manufacturing

APRIL 19, 2023

Boeing disclosed last week that subcontractor Spirit AeroSystems used a “non-standard manufacturing process” on fittings where the tail is attached to the fuselage of most models of Max jets built since 2019. Shareholders asked when the company might restore a dividend, which was suspended in early 2020.

Manufacturing 52

Manufacturing Fit Supply Chain Aerospace 52

E&T

OCTOBER 28, 2022

The rules trail similar measures put in place by the UK, which announced in 2020 that a ban on new diesel and petrol cars would be instituted by 2030. European carmakers are already proving they are ready to step up to the plate, with increasing and increasingly affordable electric cars coming to the market.

Fit 81

Fit Manufacturing Automotive 81

Plastics News

JULY 31, 2023

I also travel to clients and offer guidance of how that particular product fits in in different end-use applications in flexible and rigid packaging spaces. This solution was also recognized with a Gold Award by the 2020 Packaging Innovation Awards competition." programs in the United States.

Value chain 75

Value chain Fit Manufacturing 75

Manufacturer's Monthly

JULY 20, 2022

Australia’s movement toward the fourth industrial revolution has been seen as a difficulty due to a lack of manufacturing bases, visible in competing countries. It disclosed Australia was producing two thirds more manufacturing output than it consumes, making it an underdeveloped and expensive industry. Case studies.

Industry 4.0 105

Industry 4.0 Industry 4.0 Cycle time Automotive 105

E&T

MARCH 1, 2023

Its Varjo Aero headsets boast edge-to-edge visibility, advanced ergonomics, integrated eye-tracking, a built-in cooling system and help to reduce the effects of motion sickness, according to the manufacturer. Together we are looking to unlock the power of attention-based insights.”

Artificial Intelligence 105

Artificial Intelligence Fit Function Manufacturing 105

Modern Machine Shop

FEBRUARY 18, 2024

In 2020, ARCH’s Newtown, Connecticut, facility bought a five-axis Grob machine to consolidate operations for a medical robotics part from several machines to one. Making Medical Machinery ARCH Medical Solutions operates over 20 manufacturing facilities across the U.S., Meeting this level of quality requires meticulous machines.

Cycle time 111

Cycle time Robotics Robotics Fit 111

Robotics Business Review

JANUARY 19, 2024

based Figure AI signed an agreement with BMW Manufacturing to test its 01 humanoid at the car maker’s plant in Spartanburg, S.C. BMW Manufacturing employs 11,000 people at its 8 million-sq.-ft. The Spartanburg facility has used robots for a variety of manufacturing tasks. Sunnyvale, Calif.-based

Automotive 126

Automotive Robotics Robotics Logistics 126

Manufacturer's Monthly

AUGUST 9, 2022

Manufacturers’ Monthly speaks with CNC Design about its additive manufacturing capabilities of large parts for different manufacturing sectors. It is a fit for many industries that are producing very large components. It is a fit for many industries that are producing very large components. VSF Composite.

3D printing 98

3D printing Composites Additive manufacturing Aerospace 98

E&T

JUNE 16, 2023

The corollary of the more famous law, Rock observed that the cost of fitting out a semiconductor fab doubles every four years. But as it will make chips for power supplies and renewables, it fits into an existing infrastructure, acting as a sister plant to one Infineon already operates in Austria. Today’s, it’s well north of $12bn.

Prototype  98

Prototype  Supply Chain Fit Electronics 98

E&T

MARCH 13, 2023

By reaching a total lifespan of seven years, the programme avoids manufacturing and transporting new vehicles, which will reduce Dott’s carbon emissions by nearly 50 per cent, the firm said. A new, more accurate GPS system is also being fitted, as well as a phone holder, to bring the fleet up to the same standards as current new vehicles.

Fit 52

Fit Manufacturing 52

MEM

JANUARY 17, 2023

In fact, in Germany, which has the largest workwear economy, as of 2020, women’s workwear has seen a 5.2% In the Netherlands, it has seen a bigger increase in growth than men’s wear between 2015 and 2020 – with an increase of 19.2%, whereas men’s workwear had only seen an increase of 11.2%. . growth increase. .

Fit 52

Fit Form Function Sourcing 52

E&T

OCTOBER 16, 2023

The uptake varies by subject, but engineering and manufacturing technologies in particular have seen a 34 per cent decline. The inquiry makes key recommendations to the government including: Ensuring that the secondary school system is “fit for the future” with parity between technical and academic pathways.

Fit 59

Fit Function Manufacturing 59

Manufacturer's Monthly

AUGUST 24, 2022

This is having a major impact on production and causing delays throughout downstream industries including building and construction, mining, oil and gas, and manufacturing,” said Crittenden. By way of context, this is a marked increase on Weld Australia’s 2020 member survey results.

Supply Chain 98

Supply Chain Industry 4.0 Industry 4.0 Fit 98

Modern Machine Shop

JULY 30, 2024

All World Machinery Supply engineers have developed an innovative high-pressure coolant system set to debut at the 2024 International Manufacturing Technology Show (IMTS). Effective chip removal is essential for manufacturing tolerance. Due to its compact design, the pump would fit in a variety of spaces.

Sourcing 98

Sourcing Fit Prototype  Aerospace 98

Robotics Business Review

JANUARY 11, 2024

” How Dextrous’ robot worked We first talked to Drumwright in 2020 for an episode of The Robot Report Podcast. Evan Drumwright previously said he envisioned the robots expanding into markets beyond logistics, including agriculture and manufacturing. “That’s not to say we’d be a perfect fit for everybody.

Robotics 128

Robotics Robotics Logistics Bill of Materials 128

MEM

MAY 23, 2023

The iPRODUCE Hackathon, held from Thursday, April 20th to Saturday, April 22nd, 2023, showcased remarkable talent and collaborative spirit across multiple locations of the project’s five cMDFs (Community Manufacturing and Design Facilities), as well as online.

Fit 52

Fit Prototype  Form Function 52

Robotics Business Review

FEBRUARY 8, 2024

The three-month accelerator will teach the startups about customer discovery, value proposition discovery, manufacturing for excellence, fundraising tactics, team management, and more. Founded in 2022, Apparel Robotics is working to change how clothing is manufactured. It is also adjustable to fit a variety of hand sizes.

Apparel 119

Apparel Robotics Robotics Prototype  119

Canadian Manufacturing

JULY 31, 2024

USW says that many of the workers have spent their entire working lives at Cambridge Brass, making fittings for outdoor waterworks. Since the pandemic hit in 2020, Steelworkers have been bargaining for better,” said Myles Sullivan, USW District 6 Director. Some workers have 20, 30 and over 40 years of seniority.

Fit 52

Fit Compliance Manufacturing 52

Manufacturer's Monthly

AUGUST 3, 2022

At Land Forces 2022 Milspec Manufacturing will reprise its “Power Solutions for Vehicles and Field Applications”, while the Office of Defence Industry Support (ODIS) will detail how this “one stop shop” government agency can lead individual companies through the maze of Defence engagement, assistance and opportunities.

Artificial Intelligence 98

Artificial Intelligence Supply Chain Sourcing Prototype  98

Manufacturer's Monthly

NOVEMBER 30, 2022

Beckhoff Automation’s global managing owner, Hans Beckhoff, and Nick Psahoulias, managing director of Beckhoff Automation, Australia, speak exclusively with Manufacturers’ Monthly about the company’s growing global presence, and the human touch needed in automation technology. We have already introduced the TwinCAT Vision software in 2017.”.

Automation 98

Automation Robotics Robotics Artificial Intelligence 98

Manufacturer's Monthly

DECEMBER 11, 2023

With 3D printing beginning to finally have the impact on manufacturing that was expected some 30 years ago, manufacturers remain wary of truly capitalising on it. Fatigue failures happen for two main reasons in additive manufactured parts according to Jurg. Additive Assurance is looking to change that.

3D printing 98

3D printing Additive manufacturing Manufacturing Aerospace 98

Gary Mintchell

SEPTEMBER 6, 2022

The PA-DIM specification fits into our mission and we have adopted it as the foundation for standardized data exchange in our ISA100 Wireless ecosystem.”. Its global network includes most manufacturers and users from every industry. Contact: Andre Ristaino, aristaino@ISA.org. About FieldComm Group.

Automation 130

Automation Industry 4.0 Industry 4.0 Compliance 130

Trimantec

MARCH 11, 2020

Driving manufacturing and engineering solutions in North Carolina. . March 9, 2020 —Trimantec, an industrial automation company based in North Carolina, announced its most recent partnership with NC based manufacturer, Russell Conveyor and Equipment - also known as RC&E. WINSTON-SALEM, NC., MDR is their focus and passion.

Supply Chain 52

Supply Chain Automation Logistics Fit 52

Fabricating & Metal Work

DECEMBER 20, 2022

The manufacturing industry, including the metalworking sector, is increasingly applying sustainable business practices as pressures such as regulations mount. At this rate, the manufacturing sector can expect more regulations in the future. Sandvik Coromant’s CoroPlus PIP helps make the manufacturing process more sustainable.

Industry 4.0 105

Industry 4.0 Industry 4.0 Compliance Supply Chain 105

Control Engineering

MAY 10, 2023

HMI upgrade insights Rockwell Automation experts provide product information, specifications and explanations on: FactoryTalk Optix, a new open, collaborative, extensible visualization platform in the Rockwell Automation FactoryTalk line enabled in part by Rockwell Aujtomation’s 2020 acquisition of ASEM.

Automation 52

Automation Smart manufacturing Industry 4.0 Industry 4.0 52

Manufacturer's Monthly

DECEMBER 6, 2022

While the pandemic was the initial cause of supply chain disruptions in 2020, political factors are now perpetuating the challenge. There is no one-size-fits-all model for how business should adjust. The post Australia’s trading environment faces radical change appeared first on Manufacturers' Monthly.

Supply Chain 98

Supply Chain Form Value chain Pharmaceutical 98