Fastener News Desk

MARCH 19, 2024

At the outset of the AMUG Conference, Würth Additive Group unveiled its first global, public-facing print on the newly developed Digital Inventory Services (DIS) Platform. OEM parts are now sent into the world securely and profitably, all within a matter of minutes. We eagerly anticipate engaging further with the community throughout AMUG.”

3D printing 52

3D printing Supply Chain Additive manufacturing Rapid prototyping 52

Additive Manufacturing

FEBRUARY 21, 2023

– A newly formed US subsidiary for accelerated expansion Nasdaq First North-listed Freemelt – a high-tech commercial company whose groundbreaking solutions create new conditions for rapid growth in 3D printing – appoints Eric Bert to the newly created position of President of Freemelt – Americas. Read more at www.freemelt.com.

3D printing 52

3D printing Additive manufacturing Form Sourcing 52

Additive Manufacturing

DECEMBER 17, 2022

OssDsign Cranial PSI is a patient-specific cranial implant made from 3D printed medical-grade titanium covered by a regenerative calcium phosphate composition. 4 and MDR 2017/745. The data were collected as part of post-market surveillance in Europe, the U.S., and selected Asian markets, in accordance with MEDDEV 2.7/1

Composites 97

Composites 3D printing Form Additive manufacturing 97

AU Manufacturing

JUNE 11, 2023

The Asia-Pacific International Additive Manufacturing Conference (APICAM) is set to return for its third year from 21 to 23 June at the University of Sydney. APICAM launched in 2017 and had its second event in 2019, although it was put on hold for four years owing to COVID-19.

Additive manufacturing 52

Additive manufacturing Manufacturing Digital manufacturing 3D printing 52

Manufacturer's Monthly

SEPTEMBER 26, 2022

Global medical technology company Stryker has opened its Australian research and development (R&D) lab in Brisbane, Queensland as part of a partnership with the Innovative Manufacturing Cooperative Research Centre (IMCRC). The post IMCRC partner Stryker opens Brisbane R&D lab appeared first on Manufacturers' Monthly.

3D printing 80

3D printing Advanced manufacturing Robotics Robotics 80

Additive Manufacturing

AUGUST 27, 2022

Having been affiliated with the Cleveland Clinic healthcare system for nearly 50 years, Dr. Cosgrove served as President and Chief Executive Officer from 2004 to 2017 and is currently an Executive Advisor to the Clinic. The post 3D Systems Announces Appointments to Medical Advisory Board appeared first on Additive Manufacturing (AM).

3D printing 52

3D printing Pharmaceutical Additive manufacturing Prototype  52

Control Engineering

SEPTEMBER 14, 2022

Manufacturing Supply Chain Insights. Manufacturing is the No. Many small and midsized manufacturers assume their limited profile shields them from being targeted in cyberattacks, the opposite is often true thanks to the supply chain. Given the interconnectedness of global manufacturing, cybersecurity can be a massive challenge.

Supply Chain 52

Supply Chain Digital manufacturing Manufacturing Compliance 52

Manufacturer's Monthly

NOVEMBER 28, 2022

Space Tank Studio is a business makerspace and manufacturing incubator helping local designers and innovators build new to-market products with global potential. New ideas and start-ups inject excitement into Australia’s manufacturing ecosystem. New ideas and start-ups inject excitement into Australia’s manufacturing ecosystem.

3D printing 93

3D printing Prototype  Advanced manufacturing Manufacturing 93

Additive Manufacturing

SEPTEMBER 4, 2022

SLM Press Release – SLM enters into Investment Agreement with Nikon to further enhance SLM’s leadership position in Additive Manufacturing Nikon to launch all cash public takeover offer for SLM at EUR 20 per share, representing a premium of 75% to the undisturbed closing price as of September 1 st 2022 Key shareholders Elliott, ENA and Hans J.

3D printing 52

3D printing Additive manufacturing Digital manufacturing Aerospace 52

Manufacturer's Monthly

AUGUST 9, 2022

Manufacturers’ Monthly speaks with CNC Design about its additive manufacturing capabilities of large parts for different manufacturing sectors. John Croft, development manager additive technologies for CNC Design, remembers his first encounter with additive manufacturing in 1991. VSF Composite. The 22 by 5 by 1.6

3D printing 85

3D printing Composites Additive manufacturing Aerospace 85

Additive Manufacturing

NOVEMBER 14, 2022

Calty Design Research and 3D printing company Carbon join forces. ” Carbon, an adidas partner since 2017, has revolutionized athletic footwear by providing the technology platform for the production of adidas 4D midsoles. and Carbon appeared first on Additive Manufacturing (AM). PLANO, Texas, Nov.

3D printing 52

3D printing Automotive Sourcing Fit 52

Manufacturer's Monthly

APRIL 19, 2023

Manufacturers’ Monthly sits down with co-founder and CEO Andrew Uscinski to discuss the company’s growth and aspirations in the burgeoning Australian space industry. We were grouped together as a team in university around 2017, and we all wanted to influence the growing space industry in Australia,” Uscinski said.

3D printing 99

3D printing Aerospace Supply Chain Prototype  99

i4.0 today

FEBRUARY 17, 2023

For a long time, 3D construction printing has been seen as a possible solution to the escalating affordable housing crisis. Proponents of the technology claim, that when 3D printing projects in construction are carried out at scale, the advantages of the technology become clear.

3D printing 52

3D printing Sourcing Robotics Robotics 52

Control Engineering

AUGUST 17, 2023

The analysis is based on a collection of enterprise 5G deployments, covering the period 2017-2021. Are you currently researching, testing, or running PoC on 5G-enabled AR solutions for enterprises in the manufacturing/industrial sector? To smart manufacturing enterprises, the ratio is 1 to every 4.

Industry 4.0 52

Industry 4.0 Industry 4.0 Smart manufacturing Electronics 52

AU Manufacturing

MAY 7, 2023

Then, in 2017, a law was established that forbade the sale of cosmetics that had undergone animal experimentation as well as the use of data from such testing for cosmetic purposes. The post Australia paves the way for bioprinting with University of Sydney breakthrough appeared first on Australian Manufacturing.

Function 52

Function 3D printing Manufacturing 52

Additive Manufacturing

APRIL 28, 2023

Rome (Italy) / Tel-Aviv (Israel) – April 27, 2023 – Dedem has signed an exclusive distribution agreement with Tritone Technologies, a global provider of metal and ceramic additive manufacturing (AM) technology for industrial production. With more than 20 years of experience in 3D printing, it was a simple choice.

3D printing 52

3D printing Additive manufacturing Prototype  Aerospace 52

Fabricating & Metal Work

FEBRUARY 12, 2023

In the United States, the company develops and manufactures highly specialized carbide cutting tools, inserts and rods. It has two manufacturing facilities in the United States, one located in Schaumburg and the other in Sacramento, Calif. We are really focused on materials and the complexity of components,” Cope said.

3D printing 84

3D printing Composites Supply Chain Automotive 84

Mold Making Technology

MAY 2, 2023

From the start, the company embraced the benefits of metal additive manufacturing (AM). Initially, that involved 3D printing metal tool components, details and geometries that would otherwise need to be EDM’d. Last year, Linear merged with on-demand digital manufacturer Shapeways Inc.

Cycle time 98

Cycle time 3D printing Additive manufacturing Supply Chain 98

Manufacturer's Monthly

JULY 26, 2022

And the vast majority will be here again in 2023, including major manufacturers such as Lockheed Martin, Northrop Grumman and Boeing, and suppliers large and small, including many of the 50-plus Australian companies that together have won more than $1.35 billion worth of work on the Lockheed Martin F-35 Joint Strike Fighter.

Aerospace 83

Aerospace 3D printing Advanced manufacturing Form 83

Additive Manufacturing

MAY 22, 2023

Tel-Aviv, Israel / Birmingham, AL, USA – May 22, 2023 – Tritone Technologies, a global provider of metal and ceramic additive manufacturing (AM) technology for industrial production, will partner with Technical Training Aids (TTA) and Prototyping Solutions (PS) to expand their presence in the United States.

Prototype  52

Prototype  3D printing Additive manufacturing Aerospace 52

Modern Machine Shop

JANUARY 23, 2023

Brent Donaldson, Editor-in-Chief of Modern Machine Shop: Welcome to Made in the USA, the podcast for Modern Machine Shop magazine that explores some of the biggest ideas shaping American manufacturing. It's become apparent to many people outside of manufacturing, why the US needs a robust manufacturing base.

Sourcing 98

Sourcing Supply Chain Manufacturing 3D printing 98

Modern Machine Shop

FEBRUARY 20, 2023

Brent Donaldson, Editor-in-Chief of Modern Machine Shop: Welcome to Made in the USA, the podcast from Modern Machine Shop magazine that explores some of the biggest ideas shaping American manufacturing. One of the key tools helping US machine shops and other manufacturers compete with lower cost countries by automating production.

Robotics 40

Robotics Robotics Supply Chain Automation 40