E&T

FEBRUARY 14, 2023

Traditional original equipment manufacturers (OEMs) and start-ups have invested more than $280 billion in innovative software and hardware solutions since 2010, said McKinsey.

Automotive 102

Automotive Artificial Intelligence Energy Solutions Automation 102

E&T

SEPTEMBER 20, 2022

It will perform various functions. Around 2010, our investments went towards data analytics and AI as AI is important for simulation. Software and mixed tech are required because the vehicle is not just a means of transport. The vehicle will send out alerts on predictive maintenance and driver behaviour.

Artificial Intelligence 89

Artificial Intelligence Automotive Value chain Prototype  89

Mold Making Technology

NOVEMBER 19, 2023

In 2010, a customer transferred an injection mold for a quick-snap hose connector to Accudyn when another supplier could no longer support its needs. Results: Enhanced reverse engineering capabilities via 3D scanning reduced measurement time and minimized the risk of mold failure.

Form 110

Form Automotive Function Manufacturing 110

E&T

AUGUST 1, 2022

In order to address the issue of space junk, t he European Space Agency is planning a mission to attempt the capture and removal of space debris with a four-armed robot , while the UN issued a set of Space Debris Mitigation Guidelines in 2010, subsequently reinforced in 2018.

Function 81

Function Robotics Robotics 81

Mold Making Technology

MARCH 8, 2023

While the Hummer brand was discontinued between 2010 and 2021, it returned last year fully reimagined as an all-electric GMC sub-brand. NAL) , a Koito group company and its suppliers have developed a multifunctional system that combines 11 separate functions into the signature lightbar and headlights. Photo Credit: General Motors Co.

Function 98

Function Prototype  Form Automotive 98

Manufacturer's Monthly

DECEMBER 6, 2022

Established in 1997 and formed as a merger between Proline Technologies and Wisby & Leonard in 2010, Sevaan Group has gone from strength to strength. Today, Sevaan Group’s unique and highly integrated operation consists of sheet metal fabrication, machining and finishing at scale.

Manufacturing 98

Manufacturing Supply Chain Sourcing Fit 98

Manufacturer's Monthly

DECEMBER 5, 2023

We thought, gases are functionally fluid – in our battery, we’ve also got a fluid. Compared to 2010’s 28,100 tonnes, there has been a significant increase of lithium production in the past decade. The idea occurred to the team while using polymer that had been used previously in gas separation membranes. “We

Sourcing 105

Sourcing Form Manufacturing Function 105

The Automation Blog

AUGUST 2, 2022

ladder, function block, or structured text) for your application or process will most likely be a personal preference decision. Almost a decade later, the L series arrived (2010). As with anything, the best structure (i.e., These were both, as the technology back then dictated, physically large chassis-style controllers.

Function 52

Function Automation Form 52

Dinesh Mishra

JUNE 24, 2024

Established in 2010, Gokul Ferrocast Private Limited has positioned itself as a leading manufacturer, supplier, and exporter in the precision Ductile and Gray iron casting industry. Ahuja, Joint Managing Director, and Mr. Nitin B. Landge, Joint Managing Director of Gokul Ferrocast Pvt.

Automotive 52

Automotive Benchmarking Function Manufacturing 52

Mold Making Technology

FEBRUARY 18, 2024

This implies that a certain level of inventory is expected to be maintained over time for services to function efficiently. Also, services consumption encompasses diverse businesses, such as travel, which includes air travel, hotels, food services and more.

Electronics 80

Electronics Manufacturing Sourcing Form 80

Additive Manufacturing

MARCH 13, 2023

According to the Jabil 2021 survey, 80-percent of manufacturers report using additive manufacturing to produce 25-50-percent of their functional or end-use parts. However, I’ve been in the industry since 2010 in a variety of sales or marketing roles, so I’ve seen a few things.

3D printing 98

3D printing Additive manufacturing Assembly Line Manufacturing 98

MEM

JUNE 15, 2023

In addition, the latest advanced Mazak laser cutting technology, the OPTIPLEX 3015 NEO will also be on display, featuring the latest beam-shaping technology and the newest MCT 3 cutting head with intelligent functions, including Auto Nozzle Changing and Auto Focus Distance.

Advanced manufacturing 52

Advanced manufacturing Manufacturing Automation Form 52

Fabricating & Metal Work

APRIL 17, 2025

The KR CYBERTECH nano ARC is especially well suited for simple arc welding and is available with reaches ranging from 1,441 mm and 1,843 mm to 2010 mm. Banner brand sensors, IO-Link and wireless communication technology is used throughout the cell for discrete control and monitoring of a variety of the system functions.

Robotics 52

Robotics Robotics Automation Artificial Intelligence 52

Control Engineering

APRIL 7, 2023

In fact, the stakes are even higher when critical infrastructure is involved, elevating the risk to national security level.

Manufacturing 52

Manufacturing Industry 4.0 Industry 4.0 Function 52

i4.0 today

FEBRUARY 21, 2023

Solar power Solar power is becoming increasingly prevalent as a source of energy production, gradually substituting systems that rely on fossil fuels to function, and solar panels have an important role to play. The price of solar panels has also dropped by 88% since 2010, becoming a much more affordable solution.

Sourcing 52

Sourcing Function Industry 4.0 Industry 4.0 52

MEM

JULY 6, 2023

Graphene has long been heralded as the future of electronics since its discoverers won the Nobel prize in 2010. However, it has taken years of development of materials and processing to bring it to practical use.

Electronics 52

Electronics Artificial Intelligence Composites Automotive 52

MEM

JULY 5, 2023

Graphene has long been heralded as the future of electronics since its discoverers won the Nobel prize in 2010. However, it has taken years of development of materials and processing to bring it to practical use.

Electronics 52

Electronics Artificial Intelligence Composites Automotive 52

Frost & Sullivan Manufacturing

AUGUST 10, 2023

Evolution of EEX Auctions for the EU ETS: 2010-2021 Other state actors such as the United Kingdom, the United States, and Korea are progressively adjusting their targets and strengthening their pledges.

Compliance 52

Compliance Energy Solutions Form Function 52

Gary Mintchell

OCTOBER 4, 2023

In what Chris McLaughlin from Vertech describes as “stupidity or altruism,” he offered to build RITI one cohesive software platform that would encompass all the existing functionality and add the missing features required to scale their service for the homeless. There are three categories of nodes: inputs, functions, and outputs.

Pharmaceutical 147

Pharmaceutical Function Automation Beverage 147

Robotics Business Review

OCTOBER 6, 2024

In the same way, a high-performance hardware with advanced CPU and GPU functionalities requires an equally sophisticated operating system to maximize their potential. The relationship between software and hardware is akin to the synergy between a skilled surgeon and their instruments.

Robotics 125

Robotics Robotics Artificial Intelligence Function 125

Mold Making Technology

FEBRUARY 2, 2024

The components library now includes the following Moka robot models: MR07S-930, MR08-1840, MR10L-2050, MR10Z-1440, MR12-2010, MR12Z-1550, MR20-1800, MR20E-1840, MR25ED and MR30-1700. Also read, “ Robotic Programming Suite Introduces Enhanced Functionalities, Improvements.”

Robotics 52

Robotics Robotics Function 52

E&T

JULY 26, 2022

Most studies of such space debris have focused on the risk generated in orbit by defunct satellites which might obstruct the safe operation of functioning satellites, or damage existing facilities such as the James Webb Space Telescope. .

Compliance 81

Compliance Function Robotics Robotics 81

Control Engineering

JANUARY 22, 2023

From 1992 to 2010, there has been a significant reduction in electrical injuries — more than 50% — which can be attributed in part to the application of new technologies and best practices, which have reduced risk and exposure to electrical hazards.

Automation 52

Automation Function Compliance Manufacturing 52

Frost & Sullivan Manufacturing

SEPTEMBER 26, 2022

In 2010, the Union Cabinet approved the National Road Safety Policy which recommends comprehensive policy initiatives to enhance road safety. Meanwhile, airbags – another critical safety feature in vehicles that function as a supplement to seat belts – are also under the lens.

Automotive 52

Automotive Form Function Manufacturing 52

Mold Making Technology

JANUARY 10, 2024

The joint company collaborated with LEDAS (now LGS 3D) in 2010 to add motion simulation and crash detection capabilities, which were subsequently licensed and integrated into the package. In 2008, Cimatron merged with CNC machining software provider Gibbs and Assoc. and added GibbsCAM to its product offering.

Consumer Goods 52

Consumer Goods Lead Time Automotive Aerospace 52

i4.0 today

SEPTEMBER 13, 2024

” CAS sought to modernize its OpenStack environment to enhance the resiliency, reliability, and functionality of its private cloud, which hosts its solutions. We underwent a full redesign to achieve modernization of our cloud infrastructure.”

Function 52

Function Industry 4.0 Industry 4.0 52

Foley

JULY 11, 2023

Stuxnet, a malicious computer worm discovered in 2010, targeted ICS in Iran’s nuclear facilities, highlighting the potential real-world implications of such attacks. Such an attack can halt production, cause physical damage, or even result in safety incidents. National Security.

Manufacturing 40

Manufacturing Compliance Supply Chain Form 40

Robotics Business Review

FEBRUARY 27, 2025

Previously, Kuffner was a leader at Google for various engineering functions, including as the head of Googles Robotics division, where he helped develop Googles self-driving car and managed research projects. James has a Ph.D., in computer science from Stanford University.

Robotics 75

Robotics Robotics Artificial Intelligence Logistics 75

Modern Machine Shop

FEBRUARY 20, 2023

As Jake explains, Productive Robotics technically began in 2010, but only very slowly as a secondary company to ZBE, which was still producing machines and maintaining its core engineering team. Tariffs generally restrain trade, the economic system doesn't function as well when there's tariffs clogging up the works.

Robotics 40

Robotics Robotics Supply Chain Automation 40

Modern Machine Shop

FEBRUARY 5, 2025

Brent: It’s a functional art museum in a way. And in 2010,the house salesman had told me they were going to build a five axis, and I gave them a $5,000 deposit and said, I want one of the first ones. Somebody sent me a picture of one someone made and said that you couldn't make that. Took a little bit.

Manufacturing 59

Manufacturing Function Automation 59