Gary Mintchell

AUGUST 28, 2023

It’s still all about data—collect, analyze, present, use. This bi-directional integration enables users to seamlessly combine contextualized time series data from industrial assets with a vast array of enterprise data sources to deliver more robust reporting, analytics, and predictions in their business. What can we say?

Pharmaceutical 130

Pharmaceutical Sourcing Function Manufacturing 130

Robotics Business Review

AUGUST 17, 2024

An agricultural industry group is fighting to keep DJI as a vendor due to the ease of use for its software. It said intends to represent, protect, and advocate for the interests of the agricultural industry in the use of spray drone technology. 6572) currently working its way through Congress.

Robotics 127

Robotics Robotics Form Manufacturing 127

Fastener News Desk

FEBRUARY 8, 2025

Employment was stable as final head-count adjustments were made, in many cases among the white-collar workforces. Four of the six largest manufacturing industries (Petroleum & Coal Products; Chemical Products; Machinery; and Transportation Equipment) expanded in January, up from none in December,” says Fiore.

Manufacturing 52

Manufacturing Supply Chain Beverage Electronics 52

E&T

AUGUST 11, 2023

Many of the materials commonly thrown in household recycling bins, including flexible films, multilayer materials and a lot of coloured plastics, cannot be recycled using conventional methods. And only about 9 per cent of plastic in the US is ever reused, often in low-value products.

Manufacturing 98

Manufacturing 98

Manufacturer's Monthly

FEBRUARY 17, 2025

The key to overcoming these challenges lies in harnessing the power of Industry 4.0 A Private Mobile Network (PMN) is a dedicated, standalone cellular network designed exclusively for an organisations use, providing secure, reliable, and high-performance connectivity tailored to specific operational needs. technologies.

Industry 4.0 59

Industry 4.0 Industry 4.0 Automation Robotics 59

Foley

APRIL 3, 2023

You read that correctly: A PFAS plaintiff in a case pending in Ohio federal court recently asserted “one of the largest class actions in history,” according to the Sixth Circuit Court of Appeals, which is currently considering an appeal filed in In re E.I. DuPont de Nemours & Co. 1 2022 WL 4149090, at *10 (6th Cir.

Manufacturing 104

Manufacturing 104

Frost & Sullivan Manufacturing

APRIL 2, 2025

Representing the Industrial practice at Frost & Sullivan, I naturally gravitated toward the Cannabis & Psychedelics , Environment & Energy , and Instrumentation & Nanoscience tracks. The conversations were a mix of nostalgia, sharp insight, and shared optimism about the future of this remarkable industry.

Pharmaceutical 52

Pharmaceutical Function Automation Process control 52

Design World

JULY 26, 2022

In honor of Sorbothane’s anniversary, we discuss the unique history of the company, including how the material was developed for insoles to support runners and then became essential for industrial industries to protect vital cargo and equipment. What types of industries can Sorbothane work well in? DW: That’s quite interesting!

Cargo 264

Cargo Supply Chain Fit Form 264

Cisco Manufacturing

DECEMBER 20, 2022

The Internet is littered with articles about Industry 4.0. Adoption of digital industrial processes have accelerated since the German government led this initiative to maintain national industrial prowess. One of the main features of Industry 4.0 Industrial Process and Asset Monitoring. 2) Manufacturing logistics.

Automation 111

Automation Industry 4.0 Industry 4.0 Process control 111

Manufacturer's Monthly

SEPTEMBER 17, 2023

Eye and hearing protection are critical in the paper and board industry to prevent injuries and promote workers’ health and safety. Workers are often exposed to hazardous chemicals, flying debris, and loud noise levels while operating heavy machinery and equipment.

Fit 98

Fit Manufacturing 98

Manufacturer's Monthly

AUGUST 10, 2022

Aggressive operating environments can take a rapid toll on the wear life of industrial machinery, as metal or ceramic components often fall victim to abrasion, corrosion, and chemical damage unless pre-treated. Additionally, the Carbide Putty from this range boasts impressive chemical and temperature resistance up to 120°C.

Composites 98

Composites Manufacturing 98

Robotics Business Review

FEBRUARY 10, 2025

The system uses vision-targeted lasers to destroy weed plants as they emerge from the soil. The business case for laser weeding is twofold: manual labor savings and herbicide chemical reduction. To achieve this, the G2 uses the latest NVIDIA processors, improved lasers, perception cameras, and lighting. meters (13.3

Robotics 59

Robotics Robotics Fit 59

Manufacturer's Monthly

JUNE 20, 2023

Manufacturers’ Monthly sits down with Tim Case, interim CEO of Trioda Wilingi and Dr Jane Fitzpatrick, CEO of ANFF, to discuss how the medical device company harnesses the abundantly available native spinifex grass to develop innovative medical gels. The Australian outback is home to some of the world’s most unique and hardy plant life.

Supply Chain 98

Supply Chain Manufacturing Sourcing 98

Mold Making Technology

FEBRUARY 27, 2025

Specifically, LSI Solutions wanted to find the right 3D printing technology to pair with a specific material grade, Ultracur3D RG 3280, from the chemical solutions company, Forward AM. Prior to this, the company was using commodity production equipment to try to build molds. Enter Axtra3D’s printer for injection molding.

3D printing 78

3D printing Prototype  Additive manufacturing Fit 78

Manufacturer's Monthly

NOVEMBER 17, 2024

A team of 15 researchers at the University of Queensland’s (UQ) Australian Institute for Bioengineering and Nanotechnology (AIBN) is developing technology to remove PFAS from contaminated water for use in battery manufacturing PFASs are a group of synthetic chemicals used in various industrial and consumer products.

Manufacturing 98

Manufacturing Sourcing Prototype  Form 98

Gary Mintchell

JULY 18, 2023

Its TrakSYS software platform demystifies manufacturing operations, providing users with heightened visibility, profound insights, and superior control—indispensable factors for success in their rapidly-evolving industrial landscape. TrakSYS enjoys a trusted position at over 11,000 facilities in more than 100 countries.

Beverage 130

Beverage Automation Form Automotive 130

Control Engineering

OCTOBER 22, 2023

For process manufacturing, digital transformation—the base of “Industry Manufacturing 4.0”—is Many chemical companies, food and beverage manufacturers, and pharmaceutical companies (amongst others) are still struggling with production systems that are obsolete. is also key to updating and improving operations. The recipe is activated.

Automation 105

Automation Pharmaceutical Beverage Process manufacturing 105

Mold Making Technology

NOVEMBER 28, 2024

Desktop Molding Desktop injection molding machines can provide a gateway into industrial-grade molding without the complexity or high cost of traditional large-scale machines. The machine typically uses standard size (approximately 0.125" diameter) virgin plastic pellets. Some customers also use recycled plastic material.

3D printing 52

3D printing Prototype  Rapid prototyping Bottleneck 52

Modern Machine Shop

JANUARY 9, 2025

based machine shops using tools from Ceratizit are likely using materials processed at this plant. Source, all images: Ceratizit / GTP Conversations about and efforts toward sustainability and circularity are becoming increasingly common among manufacturers in a variety of industries. we are using even slightly more than that.”

Sourcing 98

Sourcing Form Manufacturing Composites 98

Control Engineering

SEPTEMBER 2, 2022

Process manufacturers looking to improve sustainability can use assets that already exist within their facility. A chemical manufacturer improved control methods to increase heat recovery 30% and cut steam consumption by 15% in 30 months. Roadblocks on the path to sustainable industrial operations. Advanced Analytics Insights.

Process manufacturing 97

Process manufacturing Compliance Function Manufacturing 97

Manufacturer's Monthly

MARCH 14, 2023

Early data shows that gels using the spinifex nanofibres will last longer, be easier to inject and may be safer than current medical gel products. They can be used, for example, in medical gels, surgical gloves, nappies, transparent paper, and even flexible electronic components. This project uses Triodia pungens.

Supply Chain 98

Supply Chain Electronics Sourcing Manufacturing 98

ATS

NOVEMBER 4, 2024

To avoid this and to minimize the cost of producing steam and/or hot water, manufacturers must carry out regular industrial boiler maintenance. It also provides a checklist that can be taken as a guide to boiler preventive maintenance, though it should always be used in conjunction with the boiler manufacturer’s recommendations.

Compliance 52

Compliance Function Form Manufacturing 52

Manufacturer's Monthly

MAY 30, 2023

Cleaning with chemicals is a daily occurrence for machines in the food processing industry. Using FDA-compliant materials such as the high-performance polymer iglidur A160, high-alloy stainless steel and a washable interior of the carriage ensures the hygienic design is adhered to.

Pharmaceutical 96

Pharmaceutical Automation Manufacturing 96

i4.0 today

JANUARY 30, 2025

Discover the future of sustainable electronics with IDTechExs new report, Sustainable Electronics and Semiconductor Manufacturing 2025-2035: Players, Markets, Forecasts , which delves into innovations across the printed circuit board (PCB) and semiconductor industries. What are existing low emission technologies that can be implemented?

Electronics 52

Electronics Manufacturing Value chain Supply Chain 52

AU Manufacturing

DECEMBER 20, 2022

The Australian Workers’ Union (AWU) said the new coal caps passed by the New South Wales Parliament today would leave industry exposed by not capping the price of coal sold to steel, chemical, and cement facilities. . The NSW Parliament ratified a bill capping the price of coal used for electricity generation. .

Manufacturing 82

Manufacturing 82

Fabricating & Metal Work

APRIL 23, 2025

tubes, which can be purchased individually, or in cases of 10 or 50 each. There are no heavy metals or other environmentally undesirable materials such as compounds containing antimony, barium, lead, chlorine, phenols, or phosphorus used, so the formulation is environmentally friendly. Madison Chemical Co.

Manufacturing 52

Manufacturing Robotics Robotics Form 52

Manufacturer's Monthly

AUGUST 15, 2023

Researchers have unlocked an industrial process that harnesses excess atmospheric carbon dioxide to produce acetic acid. Lead researcher Akshat Tanksale sat down with Manufacturers’ Monthly to discuss details of this cutting-edge development and its implications for the wider industry.

Sourcing 96

Sourcing Form Manufacturing 96

Gary Mintchell

DECEMBER 22, 2022

One is an independent report to help discover problems and solutions; the other is a use case with an end user partner. Energy efficiency is the best way for industry to cut costs and reduce emissions right now. Independent report highlights 10 actions to help industrial users improve their energy efficiency right now.

Form 130

Form Manufacturing Automation 130

AU Manufacturing

APRIL 13, 2023

Siemens Australia is set to attend Hannover Messe 2023 , the world’s largest industrial trade fair in Germany, to showcase Australia’s groundbreaking innovations. Both executives are leading Australian companies that have developed world-first innovations using Siemens technology.

Artificial Intelligence 84

Artificial Intelligence Benchmarking Automation Robotics 84

ATS

APRIL 1, 2025

Share An unexpected shutdown of an industrial furnace is disruptive and often very expensive. Industrial furnaces are used to modify the physical and chemical properties of products or materials. Additionally, they are used for sintering metal powders and firing ceramics and ceramic glazes.

Composites 52

Composites Manufacturing Form Function 52

Manufacturer's Monthly

APRIL 27, 2023

3M ’s housing solutions solve problems for customers in a variety of manufacturing sectors, the oil and gas industry and food and beverage processing. In 1969, 3M products were used by astronauts in the first moon landing, including 3M Fluorel Elastomer, a synthetic rubber used in the astronaut’s boots worn inside the space capsule.

Fit 98

Fit Form Beverage Manufacturing 98

Control Engineering

JULY 15, 2022

A strain-sensing smart skin developed at Rice University that uses very small structures, carbon nanotubes , to monitor and detect damage in large structures is ready for prime time. The “strain paint” first revealed by Rice in 2012 uses the fluorescent properties of nanotubes to show when a surface has been deformed by stress.

Discrete manufacturing 98

Discrete manufacturing Manufacturing 98

Plastics News

FEBRUARY 2, 2023

Of that, $150 million will come from resin makers , with the other $350 million coming from companies using plastic packaging in the state. It's important to note, especially for Plastics News readers, that the law defines "producers" mainly as the brand owners or companies using packaging to sell their products.

Supply Chain 105

Supply Chain Form Sourcing 105

Design World

AUGUST 1, 2022

However, commercial off-the-shelf (COTS) and COTS+ connectors are increasingly used in cost-sensitive missions such as CubeSats. Connector flashover voltage needs to be specified for a vacuum or high altitude to be suitable for use in space. To be useful in orbit, connectors need to survive the rigors of launch.

Sourcing 130

Sourcing Electronics Function 130

AU Manufacturing

FEBRUARY 15, 2023

Using micro-AM can in many instances be cheaper and quicker than using conventional manufacturing processes, and stimulates design freedom and allows the production of parts and components with geometric complexity hitherto impossible,” Frölich explained.

Additive manufacturing 84

Additive manufacturing Function Form Manufacturing 84

Control Engineering

SEPTEMBER 9, 2022

APC uses statistical modeling, analytics, model predictive control (MPC), multiple loop control and more. APC does require expertise that companies don’t always have, but consultants and other third parties can help fill the void and even offer useful advice; being outside a company’s process and can result inout-of-the-box thinking.

Process control 105

Process control Process manufacturing Automation Manufacturing 105

DO Supply

JANUARY 29, 2025

The drives are essentially used to run critical operations in a competitive industrial automation marketplace, which necessitates the need to realize a significant return on investment (ROI) for these drives. In most cases, drive failures occur due to faulty or damaged core components inside the drive.

Overall Equipment Effectiveness (OEE) 52

Overall Equipment Effectiveness (OEE) Function Beverage Compliance 52