Automation World

DECEMBER 14, 2023

The IEC's dedication to standardization extends to various technology areas, including AI, biometrics, cybersecurity, data management and software and systems engineering, aligning with United Nations' Sustainability Goals.

Automation 130

Automation 130

Gary Mintchell

DECEMBER 11, 2023

Sparkplug has been developed as open source way for engineers to standardize their messages from IIoT devices to databases. specification has been published as an International Standard. The post The Sparkplug Specification Is Now an ISO/IEC Standard appeared first on The Manufacturing Connection.

Sourcing 147

Sourcing Automotive Automation Manufacturing 147

Design World

FEBRUARY 21, 2024

This enables a standardized mapping of these address spaces by the OPC UA Companion Specification. The data provided in this way is then available… The post Softing Industrial’s server sets new connectivity and security standards appeared first on Design World.

Automation 130

Automation 130

Design World

NOVEMBER 15, 2023

Undoubtedly, JW Winco standard parts are becoming even more functional – multifunctional, to be precise. Suitable for a wide range of applications, such as remote monitoring of… The post Intelligent standard parts from JW Winco appeared first on Design World.

Electronics 130

Electronics Function 130

Robotics Business Review

FEBRUARY 21, 2024

-based Scythe Robotics is adopting the North American Charging Standard (NACS) charge port for its M.52 NACS , also known as the “Tesla Charger” or SAE J3400, is becoming the standard in electric vehicle (EV) charging, according to Scythe. 52 can be compatible with the new standards through a common NACS-to-J1772 connector.

Robotics 128

Robotics Robotics Automation Automotive 128

Automation World

MARCH 28, 2024

Essential skills required for wireless, mobility, and edge computing technology implementation include knowledge of wireless technologies, cybersecurity protocols, compliance standards, system integration, project management and vendor-specific training.

Compliance 130

Compliance 130

Design World

JANUARY 16, 2024

Save for a temporary rollback of… The post Stainless steel: The gold standard for equipment cleanliness appeared first on Design World. Of course, economic pressures must be weighed against sophisticated safety fixtures.

Beverage 130

Beverage 130

Automation World

MAY 19, 2023

Industry standards are important but, on their own, they cannot tell a use-case driven story. However, when paired with an industrial data ops solution, they can help expedite data modeling to deliver contextualized, intelligent insights.

188

188

MRPEasy

NOVEMBER 13, 2023

In this article, we break down five ISO standards that are pivotal for manufacturers and offer insights into how they can elevate business processes and open doors to new opportunities. What are ISO standards? ISO […] The post Top ISO Standards Used in Manufacturing appeared first on Blog for Manufacturers and Distributors.

Manufacturing 114

Manufacturing 114

Robotics Business Review

MARCH 25, 2024

ASTM offers visibility into global standards development. It said his background in standards development and familiarity with the organization positions him to lead future growth and innovation. The post ASTM International names new president, continues robotics standards work appeared first on The Robot Report.

Robotics 86

Robotics Robotics Sourcing Additive manufacturing 86

Robotics Automation News

DECEMBER 15, 2023

This article explores how EpiCar is setting new standards in the car selling industry by combining efficiency, fairness, and advanced technology. The car selling industry has long been characterized by traditional practices that often lacked efficiency and fairness. The Traditional Car […]

111

111

Design World

AUGUST 11, 2022

For over 50 years Huco has offered a wide range of standard couplings designed to meet the needs of the precision automation, motion transfer, medical and laboratory sectors. The post Huco’s coupling range goes beyond “standard” appeared first on Design World.

Automation 147

Automation 147

Design World

JULY 18, 2023

FieldGate SWG50 is a compact and cost-effective ready for Netilion integration while providing an easy-to-use solution for multiple standard monitoring applications across various industries.

130

130

Design World

APRIL 18, 2023

The new robust push-pull connectors are compliant with the SMPTE ST 2082-1 standard for signal/data transmission and enable a transmission rate of 12 Gbit/s meeting the 12G-SDI… The post New ultra HD push-pull connectors provide eight times bandwidth of standard HD-SDI appeared first on Design World.

182

182

Gary Mintchell

AUGUST 3, 2023

HiveMQ Edge helps manufacturing organizations simplify and modernize their Industrial IoT infrastructure by converting proprietary OT protocols like Modbus and OPC-UA into the standardized MQTT format at the edge for easy integration with enterprise and cloud systems. “We

Sourcing 130

Sourcing Manufacturing 130

Automation Mag

AUGUST 17, 2023

The Industry IoT Consortium (IIC) published its Vertical Standards Landscape reference paper to provide guidance on which standards are most relevant to industrial IoT adopters from certain vertical industries. Compliance and safety : Meeting regulatory requirements through standards enhances safety and security in IIoT systems.

Compliance 72

Compliance Manufacturing 72

Mold Making Technology

MARCH 25, 2024

Source | Hasco Hasco hot runner is now offering additional cable options in the industry standard. While the premium cable H1225 continues to be popular, Hasco customers can, with immediate effect, also obtain standard cables with a wider selection of wiring standards and cable lengths.

Sourcing 52

Sourcing 52

Robotics Automation News

OCTOBER 12, 2023

As the use of mobile robots continues to surge in industrial settings, the Association for Advancing Automation (A3) has unveiled the second installment of its flagship safety standard for industrial mobile robots, providing guidance on safe integration practices for these systems.

Robotics 111

Robotics Robotics Automation 111

Design World

NOVEMBER 6, 2023

binder USA announced the addition of K- and L-coded panel mount parts that meet the UL 2237 standard for North American power applications. Power supply components used… The post binder USA’s new panel mount parts meet UL 2237 standards for the North American market appeared first on Design World.

130

130

Design World

AUGUST 23, 2022

Data-center passive DAC external cables have been standardized and interoperable for decades. However, the mating, inside-the-box cables have yet to be fully standardized. The post Will internal IO copper cables for data centers become standardized? appeared first on Design World.

147

147

Design World

OCTOBER 25, 2023

OVC III covers… The post Daburn AC-DC power supplies satisfy OVC III standards for EV charger installations appeared first on Design World. The series comes in versions delivering 20 to 150 watts of power — the most comprehensive choice of wattages available — and meets the latest overvoltage category (OVC) III requirements for safety.

Electronics 130

Electronics 130

Manufacturing Tomorrow

APRIL 25, 2024

Designed for fast EMC standards testing, this 110 MHz EMI-receiver/spectrum analyzer/scalar network analyzer provides the functionality to quickly carry out conducted emission measurements to international EMC standards.

Function 52

Function 52

E&T

APRIL 14, 2023

Passivhaus is, in short, the gold standard for energy-efficient homes. The standard was developed by Feist and structural engineer Bo Adamson in the early 1990s, with the first certified homes appearing in Germany soon after. This will create a ‘Scottish equivalent to the Passivhaus standard’ for all new-build housing.

Manufacturing 105

Manufacturing 105

Robotics Automation News

MAY 14, 2023

While warehouse conveyors can greatly enhance the efficiency of a warehouse, they can also pose a significant danger to employees if safety standards are not adhered to. Therefore, it is crucial for warehouse managers to promote and implement safety standards to […]

Logistics 96

Logistics 96

Design World

AUGUST 9, 2022

mm contact gap to meet IEC safety standards. Robust in a lightweight and small package, the J115F1K Series relays are UL F class rated standard with UL and TÜV approval. mm contact gap to meet IEC safety standards appeared first on Design World. Heavy contact load is a hallmark of this high-performance relay.

Manufacturing 147

Manufacturing 147

Robotics Automation News

FEBRUARY 21, 2024

Scythe Robotics, the Colorado-based company developing advanced, commercial-grade autonomous solutions for the landscape industry, says it has adopted the North American Charging Standard (NACS) charge port for M.52. As an industry first, Scythe leads the charge […]

Robotics 106

Robotics Robotics 106

Automation Mag

DECEMBER 12, 2023

ASTM International shared in a press statement that its additive manufacturing technologies committee ( F42 ) is developing a proposed standard that will be used to assign part grades across automotive industries that use AM to produce parts. This document is one step toward adding part grades/classifications in all transportation areas.”

Additive manufacturing 105

Additive manufacturing Automotive Manufacturing Automation 105

Automation Mag

AUGUST 28, 2023

ISA states that asset owners and policymakers should rely upon a broadly used set of consensus standards to address the security of industrial automation and control systems – ISA/IEC 62443– as well as ISASecure conformity assessment programs to demonstrate compliance with these standards.

Compliance 97

Compliance Automation Function 97

Automation Mag

OCTOBER 10, 2023

The Association for Advancing Automation (A3) has published the second installment of its safety standard for industrial mobile robots (IMR) – ANSI/A3 R15.08-2. The standard reportedly provides guidance on safe integration practices for these systems. It can be purchased online at AUTOMATE.ORG/buystandards. With Part 2 of the R15.08

Robotics 114

Robotics Robotics Automation Manufacturing 114

Design World

APRIL 20, 2023

Process device profiles provide a standard format for process variables and diagnostics across an array of devices for smoother vendor interoperability and easier DCS and PLC data integration from… The post EtherNet/IP adds process device profile support for enhanced process variable and diagnostic standardization appeared first on Design World. (..)

Automation 130

Automation 130

Control.com

MAY 25, 2023

Any kind of computer programming can be challenging to determine what aspects are truly unique versus what aspects should be standardized across projects and platforms to streamline future development.

98

98

NIST Manufacturing

NOVEMBER 27, 2023

The CHIPS Research and Development Office’s Chiplets Interfaces Technical Standards Workshop will be held as a hybrid in-person and virtual event from 8:30 a.m. to 5:30 p.m. Eastern Time December 12, 2023, and 8:30 am to 12:30 pm December 13, 2023

97

97

NIST Manufacturing

FEBRUARY 14, 2024

The CHIPS Research and Development Office’s Digital Twin Data Interoperability Standards Workshop will be held as a hybrid virtual and in-person event at the NIST National Cybersecurity Center of Excellence (NCCoE) conference facility in Rockville

80

80

The Fabricator

MARCH 12, 2024

The latest version of American Institute of Steel Construction (AISC) 207-23, Standard for Certification Programs, is now available for free download on AISC’s website at aisc.org/cert-updates.

52

52

Robotics Automation News

FEBRUARY 14, 2024

Four years ago, the German automotive industry joined forces with 21 partners in a project to develop the world’s first structures for the verification of safety standards for “automated vehicles” – also referred to as autonomous or self-driving vehicles – in an urban environment.

Automation 64

Automation Automotive 64

Automation Mag

AUGUST 23, 2023

IEC 62443-4-1 is an internationally recognized standard that focuses on enhancing the security of industrial automation and control systems (IACS). Compliance with IEC 62443-4-1 underlines that Omron adheres to industry-standard security requirements.

Compliance 97

Compliance Automation 97