Additive Manufacturing

NOVEMBER 16, 2022

A low yellowing index – even after prolonged UV irradiation – not only make the high-performance material attractive for additively manufactured eyewear frames, it is also suitable for applications such as microfluidic reactors or transparent high-end prototypes for observing the inner workings of complex assemblies.

3D printing 52

3D printing Additive manufacturing Value chain Prototype  52

E&T

FEBRUARY 6, 2023

We looked at Zhiyun's first foray into light sticks late last year when the company released its light sabre-style FR100C (already superseded by the upgraded FR100). The M40 is more of a one-on-one light for the immediate foreground, where the FR100C can flood the surroundings with light. It's also more subtle. It's all about the niches these days.

Control Algorithm 64

Control Algorithm Sourcing Form 64

Canadian Manufacturing

MARCH 2, 2023

The agreement is subject to two conditions precedent: sufficient funding to build the facility, and appropriate permitting having been received to build and operate the facility. VANCOUVER — Northstar Clean Technologies Inc., announced that along with its wholly-owned subsidiary Empower Environmental Solutions Calgary Ltd.,

Manufacturing 40

Manufacturing 40

Fastener News Desk

AUGUST 16, 2023

reserves the right to decline applicants for subjective reasons. SOURCE: Patriot Bolt RELATED CONTENT: Fastener Distributor Index (FDI) | July 2023 Unlocking the Potential of AI in the Industrial Supply Market For the 2 nd Time, Patriot Bolt and Fastener Makes the Inc. 5000, at No. 1716 on the 2023 Inc. To make the Inc.

Sourcing 52

Sourcing Manufacturing 52

The Automation Blog

MARCH 9, 2023

Our first new article of the day is from Opto22 here and covers commissioning their Groov Epic controllers, and also links to a free course on the same subject. First up we have a press release here from Honeywell about their new Versatilis condition monitoring transmitters for rotating machinery. To learn more, click here.

Automation 52

Automation Robotics Robotics Fit 52

Foley

MAY 10, 2023

The most common general errors we see are: (1) over-reliance on customs brokers; (2) failure to have a Customs Manual; (3) failure to have an up-to-date Customs Classification Index; (4) failure to mark goods correctly; (5) failure to manage supply chains by regulator expectations; and (6) failure to maintain required records. Why Is U.S.

Compliance 52

Compliance Supply Chain Freight Form 52

The Automation Blog

MARCH 1, 2023

Also new today is the second issue of Automation Direct's 2023 newsletter here which covers multiple subjects and includes links to a series of free, well written ebooks. First up we have a press release from Rockwell Automation here announcing an update to their line of Branch Motor Control Protection devices. To learn more, click here.

Automation 52

Automation Form 52

Fastener News Desk

JANUARY 8, 2023

The New Orders Index remained in contraction territory at 45.2 The Production Index reading of 48.5 The Prices Index registered 39.4 percentage points compared to the November figure of 43 percent; this is the index’s lowest reading since April 2020 (35.3 The Prices Index registered 39.4 percent, 0.6

Manufacturing 52

Manufacturing Beverage Electronics Apparel 52

Fastener News Desk

AUGUST 3, 2022

The New Orders Index registered 48 percent, 1.2 The Production Index reading of 53.5 The Prices Index registered 60 percent, down 18.5 percent; this is the index’s lowest reading since August 2020 (59.5 The Backlog of Orders Index registered 51.3 The Supplier Deliveries Index reading of 55.2

Manufacturing 52

Manufacturing Electronics Beverage Apparel 52

E&T

OCTOBER 17, 2023

A heavy cost of everything being connected in the digital landscape is that humans will start to lose their identity. Today, we’re busy training AI by clicking here, dragging there and ignoring the real world. This makes us a predictable and boring species.”

Artificial Intelligence 52

Artificial Intelligence Automation Robotics Robotics 52

Control Engineering

JUNE 6, 2023

In addition to the motor and drive, some type of indexer is required. This may be built into the drive and communicate to a master controller, or a controller such as a programmable logic controller (PLC) can send pulses to index the drive. Even if they are, each requires a specific knowledge toolset. Figure 1: Stepper motor system.

Robotics 52

Robotics Robotics Automation Function 52

Control Engineering

APRIL 18, 2023

Vibratory bowls, escapements, dial tables and indexers are other general classifications of equipment. Understand the seven troubelshooting fundamentals and the importance of using common sense when finding a potential problem. Review ProMat 2023 Siemens product announcements. It is usually used to move, process or change a product.

Automation 52

Automation Bill of Materials Function Robotics 52

Control Engineering

APRIL 4, 2023

Those assets can then be indexed, searched, and traded as other online commodities. Digital transformation insights Digital transformation’s growth is allowing companies to derive new insights and benefits that were not possible before and they are positioning themselves toward the machine economy. What is the machine economy?

Supply Chain 64

Supply Chain Industry 4.0 Industry 4.0 Artificial Intelligence 64

E&T

OCTOBER 11, 2022

They specifically target military research, supercomputing, and artificial intelligence but export licences for other uses will be subject to a “presumption of denial.” per cent fall in the Philadelphia Stock Exchange Semiconductor Index. per cent drop in the same index on Friday. That may make them almost impossible to get.

Artificial Intelligence 40

Artificial Intelligence Logistics Manufacturing Electronics 40

Mold Making Technology

SEPTEMBER 13, 2023

Photo Credit: AMT Registration has officially opened for IMTS 2024 – The International Manufacturing Technology Show , taking place Sept. 9-14 at McCormick Place in Chicago. IMTS is a premier industry offering a wide breadth and depth of technologies and many application experts in a single location.

Manufacturing 52

Manufacturing Supply Chain 3D printing Warehousing 52

Foley

JULY 11, 2023

” Foley & Lardner’s Manufacturing Sector team continually examines these transformational shifts through the eyes of our clients and is well-positioned to help clients stay ahead of global trends and innovate in a dynamic marketplace. Miller | vmiller@foley.com Nicholas J. With these changes comes the need for new technologies.

Manufacturing 40

Manufacturing Compliance Supply Chain Form 40