SMMT

APRIL 17, 2023

Manufacturers are investing billions in electric and hydrogen vehicles that will deliver massive CO2 savings, and it is vital that operators making long-term decisions today have full confidence in these technologies, that they will be commercially viable and allow them to keep costs down for consumers.

Logistics 138

Logistics Manufacturing 138

DO Supply

MARCH 30, 2025

Listing, CSA Certification, and compliance with emission, immunity, and low-voltage standards, it ensures reliable performance and safety in demanding industrial environments and is resistant to electromagnetic interference for long-term operation. horsepower is its rated output, and it can accept 200240V AC input.

Compliance 52

Compliance Function Manufacturing Automation 52

Manufacturer's Monthly

MARCH 5, 2024

The communication protocol IO-Link Safety is globally standardised in IEC 61139-2 and provides maximum safety up to PL e of EN ISO 13849-1 (or SIL 3 of IEC 61508/62061). Safe, standardised point-to-point communication allows safety sensors and actuators to be integrated into any current fieldbus system, regardless of higher-level systems.

Industry 4.0 98

Industry 4.0 Industry 4.0 Function Automation 98

Picomto

FEBRUARY 15, 2023

Whether it is for industrial maintenance, risk management or supply chain inspection, using a remote expert has proven its long-term worth. est apparu en premier sur. This improves safety, increases [.] L’article Remote expert: an inescapable solution in industry 4.0

Industry 4.0 52

Industry 4.0 Industry 4.0 Supply Chain 52

Picomto

SEPTEMBER 9, 2022

In fact, this Japanese term evokes the field where work takes place and added value is really created. L’article 7 steps for a successful Gemba Walk est apparu en premier sur. First of all, you should know that Gemba walk simply means “factory tour”. As a result, the manager goes to the field to observe the real situation in person.

52

52

Picomto

NOVEMBER 20, 2021

You should know that in general terms, pharmaceutical products manufacturing has to comply with certain strict standards in order to ensure quality and purity of the finished products. est apparu en premier sur. Note that FDA or the [.]. L’article How to easily comply with FDA standards in a pharmaceutical production site?

Pharmaceutical 52

Pharmaceutical Manufacturing 52

Manufacturer's Monthly

MAY 8, 2023

The internationally used terms – “Safety” for machinery safety and “Security” for IT and data security, help with the basic differentiation of the specific perspectives on the issues of safety and security. In terms of the safety aspect, it’s important to check the extent to which security issues influence functional safety.

Automation 91

Automation Function Electronics Industry 4.0 91

Manufacturer's Monthly

JUNE 11, 2024

Themed Beyond 1%, the Summit will look at how Australia can embrace key technologies and innovate to do more for long-term sustainability than just address reducing the 1% of global emissions the country is responsible for. For registration and more details go to: [link] siemens.com/au/en/company/fairs-events/beyond-summit.html.

Supply Chain 98

Supply Chain Automation Manufacturing 98

Manufacturer's Monthly

AUGUST 8, 2022

While BlueScope Distribution has been a long-term player in both the steel and aluminium sectors for many years, most customers’ awareness of the brand is as a steel distributor, processor and solutions provider. However, this perception is changing.

Supply Chain 97

Supply Chain Fit Form Sourcing 97

Manufacturer's Monthly

NOVEMBER 16, 2022

They are the perfection of machines due to their larger degree of freedom in terms of diversity and the scope of their activities. To date, at least, there is no one safe robot or one safe sensor technology that covers all possible scenarios from the applications in terms of safety. Touching without injuring.

Robotics 98

Robotics Robotics Automation Function 98

Modern Machine Shop

SEPTEMBER 10, 2024

One example is electroless nickel (EN) plating. EN has been used in the automotive industry for decades. Today, EVs present exciting new opportunities for additional growth of EN in the automotive market with the finish being used for several critical components used in electric vehicles. Source: Innovakote 4.

3D printing 52

3D printing Manufacturing Artificial Intelligence Automotive 52

i4.0 today

OCTOBER 26, 2023

Volvo Cars was looking for a long-term partner in factory automation, and we are proud that we will now shape the future of the automotive industry together,” says Marco Ghirardello, President and CEO of FANUC Europe. “The During the same phase, FANUC will also supply robots to sites in Ghent, Belgium, and Daqing, China. Today Magazine.

Robotics 52

Robotics Robotics Automotive Automation 52

Canadian Manufacturing

JANUARY 23, 2024

Under the terms of the Private Placement, FPX has issued 30,104,488 common shares in the capital of the Company to SMCL at a price of $0.48 VANCOUVER — FPX Nickel Corp. announces that it has closed the private placement financing with a new cornerstone strategic investor, Sumitomo Metal Mining Canada Ltd.,

Electronics 52

Electronics Form Supply Chain Compliance 52

i4.0 today

JUNE 10, 2024

Despite being the eighth largest manufacturing nation, we are 25th in terms of robotics adoption,” said Oliver. And in Scandinavia, a realistic view on payback periods (as well as a realisation that total cost of ownership is a better measure of value than ROI) sees companies prioritising a long-term investment strategy around automation.

Automation 52

Automation Robotics Robotics Manufacturing 52

SMMT

JULY 25, 2024

This positive position has been forged thanks to long-term OEM investment in and global demand for the high quality products being made here. With volumes just -2.9% below a really strong performance during the same period in 2023, the sector is in good health.

Manufacturing 45

Manufacturing 45

Canadian Manufacturing

MAY 9, 2023

“Nova Bus is very proud to be a long-term partner of ATUQ and its members: we have delivered more than 6,000 buses in Québec since 1997,” stated Ralph Acs, President of Nova Bus. The LFSe+ frames for this order will be built at Saint-François-du-Lac and the buses will be assembled at the Saint-Eustache facility, in Québec.

Manufacturing 59

Manufacturing Automotive 59

Canadian Manufacturing

FEBRUARY 28, 2023

has acquired Distribution En Route. Ideal is now proudly Montreal’s largest independent broadline food service distributor, bringing us one step closer to our long term objective: becoming Quebec’s largest. MONTREAL — Ideal Food Service Corp., in December of 2020.

Manufacturing 40

Manufacturing 40

i4.0 today

FEBRUARY 25, 2025

In practice, the sensors can be used in a wide variety of harsh environments: Acceleration sensors can provide stable vibration measurements for predictive maintenance and are ideal for long term monitoring of rotating shafts, turbine blades, fans and bearings. Pressure sensors can monitor performance and gather data for control systems.

Supply Chain 52

Supply Chain Aerospace Fit Manufacturing 52

i4.0 today

OCTOBER 11, 2022

“Recruiting management from within our own ranks is key to our long-term success as a fast-growing family-owned business,” said Sabine Herold, Managing Partner of DELO. delo-adhesives.com/en/. Sabine Herold and Dr. Wolf Herold, owners of DELO, remain part of the management board. Today Magazine.

Logistics 52

Logistics Manufacturing Industry 4.0 Industry 4.0 52

SMMT

NOVEMBER 14, 2024

Long-term plans are needed to ensure fleet operators of every size and location are able to get support. A network of truck charging infrastructure en route, at depots and in shared hubs will also take time to deliver. This week SMMT also published its Q3 data for the new HGV market which dipped by -6.0% between July and September.

52

52

i4.0 today

MARCH 21, 2024

Inspiring the next generation As part of its long-term strategy to revolutionise the training provision and support around automation, FANUC UK has spearheaded a number of initiatives aimed at recruiting more Gen Z entrants into the engineering space. www.fanuc.eu/uk/en

Robotics 52

Robotics Robotics Automation Manufacturing 52

Canadian Manufacturing

APRIL 28, 2023

“We are excited about the long-term prospects for NEXE as we enter production. The performance verification stage included training and a trial pre-production period. The final handoff from the vendors and contractors is now complete. The Windsor Facility’s proximity to the U.S.

Beverage 52

Beverage Manufacturing 52

i4.0 today

APRIL 25, 2023

MTP Suite: From special solution to standard Plug-and-produce brings significant improvements in terms of efficiency and cost savings. The application possibilities are almost unlimited if you think in interdisciplinary terms ,” says Jürgen Schrödel, Managing Director of COPA-DATA Germany, describing the future of MTP.

Automation 52

Automation Agile manufacturing Digital manufacturing Form 52

i4.0 today

NOVEMBER 20, 2023

This package of loans and grants will help to provide the industry with some much-needed long-term certainty,” says Tom Bouchier, Managing Director of FANUC UK. “As uk/en The post FANUC Welcomes £4.5bn Windfall for UK Manufacturing appeared first on i4.0 To learn more, visit www.fanuc.eu/uk/en Today Magazine.

Manufacturing 52

Manufacturing Aerospace Automotive Automation 52

MEM

DECEMBER 20, 2022

A Regulation in EU terms is a piece of law universally applicable to all EU member states. A Standard is a technical specification covering aspects such as dimensions, capacity, ratings etc. It is not a legal requirement but is widely considered best practice.

Compliance 52

Compliance Form Manufacturing 52

Canadian Manufacturing

FEBRUARY 3, 2023

Logo de Conseil des Atikamekw d’Opitciwan (CNW Group/Hydro-Québec) NITASKINAN (TROIS-RIVIÈRES) — The Conseil des Atikamekw d’Opitciwan (CAO), Hydro-Québec (HQ) and the Société en commandite Onimiskiw Opitciwan (SCOO) have forged an agreement to build a forest biomass cogeneration plant to supply Opitciwan.

Sourcing 40

Sourcing Manufacturing 40

i4.0 today

JUNE 25, 2024

This focus on short-term return is hindering our productivity as a nation. Focusing on a sub-two year payback can lead to businesses making compromises when developing their manufacturing strategy, and thereafter their capital equipment and automation purchasing strategy, and forces decisions to be made that do not offer long-term value.

Automation 52

Automation Robotics Robotics Fit 52

Additive Manufacturing

FEBRUARY 28, 2023

Terms of the transaction were not released. 3dnatives.com/en/. Together, we look forward to reaching even more markets, with original content produced specifically for each country in their native language.” The companies will maintain offices in the U.S., Brussels, and Paris. To learn more, visit www.3dnatives.com/en/.

Additive manufacturing 52

Additive manufacturing 3D printing Manufacturing Aerospace 52

SMMT

JANUARY 12, 2023

This trend is only expected to accelerate, with a plethora of electric LCVs entering the market in 2023 – and BEV van registrations expected to rise by a further 60.7% – but there remains a hole in the narrative: on-street and en-route charging infrastructure.

Manufacturing 40

Manufacturing 40

i4.0 today

APRIL 15, 2024

Now sitting at 25 th in the global robotics league table , we are the only G7 nation outside the top 20 and have been eclipsed by most of our European counterparts in terms of numbers of robots per 10,00 workers, including Italy, Belgium, Switzerland and the Czech Republic. www.fanuc.eu/uk/en appeared first on i4.0 Today Magazine.

Robotics 52

Robotics Robotics Automation Manufacturing 52

i4.0 today

JUNE 22, 2023

Customizable in size and capacity, they can provide a stopgap solution on-site as a new data center is being built or can operate as a permanent solution in locations where setting up long-term infrastructure is restricted. The post Delivering A Total Solution for Short and Long-Term Data Center Deployment: Xubus Node appeared first on i4.0

Industry 4.0 52

Industry 4.0 Industry 4.0 Artificial Intelligence Fit 52

i4.0 today

MAY 31, 2023

Customizable in size and capacity, they can provide a stopgap solution on-site as a new data center is being built or can operate as a permanent solution in locations where setting up long-term infrastructure is restricted. Today Magazine.

Artificial Intelligence 52

Artificial Intelligence Industry 4.0 Industry 4.0 Fit 52

Robotics Business Review

JANUARY 2, 2024

“At this point, we’re really the first to collect en masse. In explaining Meili’s current sales strategy, Lee clarified how she is focused on driving revenue in the near term. “We ” “It’s a very niche space where that data doesn’t really exist,” she acknowledged.

Robotics 121

Robotics Robotics Sourcing Fit 121

SMMT

SEPTEMBER 12, 2024

With the industry investing in new electric and hydrogen technology that will meet the UK’s long-term ambitions to decarbonise, the UK also needs a legislative agenda that makes using these vehicles possible for everyone. As SMMT set out in a recent report, however, modernising transport infrastructure is also essential.

Manufacturing 40

Manufacturing 40

i4.0 today

OCTOBER 6, 2022

Following recent expansion in San Francisco, Austin, London, Frankfurt, and Madrid, UFODRIVE, the leader in electric vehicle rental, has released a full-service subscription product driven by customer demand for longer term rentals and flexible alternatives to leasing. About UFODRIVE.

Industry 4.0 52

Industry 4.0 Industry 4.0 Electronics 52

i4.0 today

JANUARY 9, 2024

Paul Carter, Sales Manager System Automation – Robotics Flying high “In terms of UK automation uptake to date, the automotive industry has led the way. uk/en The post FANUC UK’s hottest automation trends for 2024 appeared first on i4.0 But other sectors are catching up, not least aerospace. www.fanuc.eu/uk/en Today Magazine.

Automation 52

Automation Beverage Robotics Robotics 52

i4.0 today

OCTOBER 18, 2022

The 7-billion-HUF investment to set up Toyo Ink Hungary is part of a long-term business plan of the Toyo Ink Group, in which approximately 10 billion JPY will be invested up to 2026 to strengthen its global CNT dispersions production network and to ensure a reliable global supply. “ For more information, see schd.toyoinkgroup.com/en/.

Function 52

Function Electronics Manufacturing Industry 4.0 52