Design World

JUNE 14, 2023

Formlabs announced two new materials for dental and medical applications available for the Form 3B, Form 3B+, and Form 3BL printers: Dental LT Comfort Resin and Biomed Durable Resin. The company expands its library of over 40 3D printing materials to spark innovation and advance personalized patient care for point-of-care facilities, medical device makers, and […] The post Formlabs introduces two new materials for dental and medical applications appeared first on Design World.

3D printing 130

3D printing Form 130

Gary Mintchell

JUNE 14, 2023

Nokia and EY released the results of The metaverse at work a survey of 860 business leaders from six countries soliciting thoughts on application of the “metaverse” to their businesses. In short, many are using some form and many expect business benefits. Across use cases, early metaverse adopters report benefits more often than companies still in the planning phase, with CAPEX reduction (15%) and sustainability (10%) showing largest difference Companies believe in the power of the metaverse – o

Industry 4.0 130

Industry 4.0 Industry 4.0 Form Function 130

Design World

JUNE 14, 2023

“Space is a risky business,” once said Aaron Cohen, the Acting Deputy Administrator of NASA. “I always considered every launch a barely controlled explosion.” With several new space projects expected in the near future, these risks must be avoided at all costs. This puts a greater onus on engineers to create high-performing components that can […] The post SMB Bearings: bearings in space appeared first on Design World.

130

130

Gary Mintchell

JUNE 14, 2023

I have recorded thoughts recapping my experience at the Siemens Digital Conference in Las Vegas. You can watch on YouTube or listen as a podcast. In short, I’ve watched the evolution ever since a conversation about the vision of digital factory with a Siemens executive in 2006. The journey has been a successful one for the company (and its customers) ever since.

Manufacturing 130

Manufacturing 130

Advertisement

Generative AI is upending the way product developers & end-users alike are interacting with data. Despite the potential of AI, many are left with questions about the future of product development: How will AI impact my business and contribute to its success? What can product managers and developers expect in the future with the widespread adoption of AI?

Design World

JUNE 14, 2023

• Pilot project between ABB Robotics and non-profit organization Junglekeepers demonstrates potential of robotics and Cloud technology in reversing deforestation • Using solar power, YuMi automates seed planting, making reforestation in the Amazon faster, more efficient and scalable • Project made possible by RobotStudio® Cloud technology: ABB experts simulate, refine and deploy robotic programming in… The post World’s most remote robot automates Amazon reforestation project appeared first

Robotics 130

Robotics Robotics Automation 130

Robotics Automation News

JUNE 14, 2023

Discover how intelligent automation in banking revolutionizes customer experience with personalized interactions and efficient service delivery. How can intelligent automation improve customer experience in banking? Read on for more. Slow banking experiences are all too common. The long wait times, convoluted processes, and cumbersome verification steps have left many customers frustrated and dissatisfied.

Automation 138

Automation 138

Automation World

JUNE 14, 2023

The LoadMate Plus from Mitsubishi Electric is a robot and stand system that can be configured to fit a variety of manufacturing and packaging applications.

Robotics 100

Robotics Robotics Fit Manufacturing 100

E&T

JUNE 14, 2023

Immigration is a highly controversial topic. As we mark World Refugee Day on 20 June, the latest UN Refugee Agency (UNHCR) statistics paint a harrowing picture. In the first half of 2022, 103 million people were forcibly displaced globally, a huge leap from the period before (89.3 million), linked to Russia’s invasion of Ukraine. The figure for the first six months of 2023 is forecast to be higher still, with the UNHCR predicting more than 800,000 people will flee from Sudan alone.

Electronics 116

Electronics Sourcing Supply Chain Compliance 116

Manufacturer's Monthly

JUNE 14, 2023

An investment of almost $1.35 billion in skills, training, employment and small business support has been allocated in the 2023-24 Queensland State Budget. The 2023-24 Queensland State Budget also includes the following highlights : A total of $86 million is being invested to revitalise and upgrade training infrastructure to deliver key projects such as: the Eagle Farm Robotics and Advanced Manufacturing Centre. the expansion of Great Barrier Reef International Marine College in Cairns to delive

Manufacturing 113

Manufacturing Advanced manufacturing Robotics Robotics 113

E&T

JUNE 14, 2023

“People have this idea about the River Thames, the sheer beauty of it, the sparkling sunshine on the water. But the river can turn nasty,” says Professor Hannah Cloke from the University of Reading. On a freezing January morning 70 years ago, residents of Canvey Island in the Thames Estuary woke to gale-force winds and the terrifying spectacle of water overcoming the sea wall.

Form 111

Form 111

Speaker: Kevin Kai Wong, President of Emergent Energy Solutions

In today's industrial landscape, the pursuit of sustainable energy optimization and decarbonization has become paramount. Manufacturing corporations across the U.S. are facing the urgent need to align with decarbonization goals while enhancing efficiency and productivity. Unfortunately, the lack of comprehensive energy data poses a significant challenge for manufacturing managers striving to meet their targets.

Manufacturing

Automation World

JUNE 14, 2023

Mitsubishi Electric's LoadMate Plus can be configured to fit a variety of applications, such as pick and place, inspection, assembly and packing.

Fit 100

Fit Robotics Robotics 100

E&T

JUNE 14, 2023

Vodafone will own the majority of the business with 51 per cent, while CK Hutchison will own 49 per cent. The firms first announced they were in talks last October, but the finalised merger agreement will now trigger a lengthy review process by UK regulatory boards. In 2021, the Competition and Markets Authority approved the proposed merger between Virgin Media and O2.

111

111

The Fabricator

JUNE 14, 2023

Compressed air typically is used for manual metal plasma cutting in a fab shop. But oxygen, nitrogen, or other gas blends give fabricators ample reasons to use them instead.

105

105

E&T

JUNE 14, 2023

Berlin-based Ulises Design Studio has used AI to re-imagine the classic caravan as a futuristic multi-level living space. Created using AI tool Midjourney, the ‘Kinetic Kingdoms’ vehicles are said to unite nomadic lifestyles with modern amenities “in a charming retro-futuristic style”. Studio founder Ricardo Orts explains: “By embracing a more nomadic lifestyle, we can explore new ways of living that are both exciting and sustainable, all while fostering a sense of community and connection with

Artificial Intelligence 104

Artificial Intelligence 104

Advertisement

Start-ups & SMBs launching products quickly must bundle dashboards, reports, & self-service analytics into apps. Customers expect rapid value from your product (time-to-value), data security, and access to advanced capabilities. Traditional Business Intelligence (BI) tools can provide valuable data analysis capabilities, but they have a barrier to entry that can stop small and midsize businesses from capitalizing on them.

Manufacturer's Monthly

JUNE 14, 2023

Ifm recently hosted a captivating event at its Melbourne office featuring guest speakers from its global headquarters. Manufacturers’ Monthly was there to find out the possibilities and value to be found in moneo, an AI-assisted, self-service IoT platform that integrates with existing systems. From its foundation over 50 years ago, ifm continues to be a family- owned business which implements particular virtues.

Industry 4.0 98

Industry 4.0 Industry 4.0 Compliance Automation 98

Frost & Sullivan Manufacturing

JUNE 14, 2023

With a focus on fostering innovation, sharing best practices, and empowering women, Frost & Sullivan is proud to announce the launch of its highly anticipated “ EmpowerHer” Growth Council Think Tank series, dedicated to addressing the growth gap in women’s health. These Think Tanks will be conducted over the next 12 months, starting in June 2023.

Benchmarking 98

Benchmarking 98

E&T

JUNE 14, 2023

The fossil fuel giant has instead said it will aim to keep the amount of oil the company extracts at today's level until the end of the decade. The news was announced as part of a strategic shift presented by Shell's new chief executive Wael Sawan in New York, that aims to “simplify” the energy major’s business and increase investor confidence. Since taking the job in January, Sawan has been looking at ways of increasing performance in an attempt to close the valuation gap that separates the co

98

98

Manufacturer's Monthly

JUNE 14, 2023

SEW-Eurodrive’s newest portfolio of stainless-steel gear motors is the perfect recipe for success, presenting strong reliability and hygiene to processing lines. In the food-processing world, there are many examples of conveyor lines brought to a halt by drive units that couldn’t handle the daily dose of high-pressure washdowns and chemical cleaners.

Beverage 98

Beverage Manufacturing 98

Advertisement

As engineers push the boundaries of innovation with groundbreaking hardware products, their success depends largely on the speed and efficiency of production. The challenge? Manual processes and disparate systems lead to multiple versions of documents, incomplete records, and duplicated work, creating a chaotic system of records that is difficult to manage.

Industry 4.0

Fabricating & Metal Work

JUNE 14, 2023

If your manufacturing or fabrication operation has large weldments with numerous welds, missing a weld in the sequence can be very costly. To solve the problem of missed welds, consider a monitoring system such as Insight Centerpoint from Miller, a real-time welder feedback solution that provides arc data monitoring, guidance and control in the weld cell.

Fit 98

Fit Sourcing Manufacturing 98

Robotics Automation News

JUNE 14, 2023

In the world of software development, choosing the right methodology is crucial for successful project execution. The methodology you select can significantly impact your team’s efficiency, productivity, and overall project outcomes. This article aims to guide you through the process of selecting a suitable software development methodology.

98

98

Manufacturer's Monthly

JUNE 14, 2023

The world’s largest trade fair for production technology is back with a bang for 2023. Manufacturers’ Monthly finds out what is shaping and moving industry and the latest trends in technology for manufacturers. EMO Hannover 2023 will welcome over 2200 exhibiting companies and more than 116,000 professional attendees both in Hannover and digitally. The show is moving towards the theme of “innovate manufacturing,” reflected by a new format focused on cross-sector communication.

3D printing 98

3D printing Artificial Intelligence Additive manufacturing Robotics 98

Robotics Automation News

JUNE 14, 2023

An auto dialer is an outbound call center system that automatically calls customers’ phone numbers. It either gives them essential information through an automated message or connects them to a real person when they answer. This post will give you information on how these auto dialing systems improve the performance of your remote call center.

Automation 98

Automation 98

Advertisement

While data platforms, artificial intelligence (AI), machine learning (ML), and programming platforms have evolved to leverage big data and streaming data, the front-end user experience has not kept up. Holding onto old BI technology while everything else moves forward is holding back organizations. Traditional Business Intelligence (BI) aren’t built for modern data platforms and don’t work on modern architectures.

Artificial Intelligence

Cisco Smart Manufacturing

JUNE 14, 2023

Recently, we’ve seen lots of activity and announcements around multicloud security – particularly network security (or the expanded view – secure cloud networking ).

92

92

Robotics Automation News

JUNE 14, 2023

Cycling is one of the best ways to get around Chicago, especially during warmer days. It allows you to enjoy fantastic views while getting your workout. From the Lakefront Trail to the 606 and the North Branch Trail, there are various trails for those who want to get out on their bikes.

98

98

Mold Making Technology

JUNE 14, 2023

INCOE Corporation designs and manufactures hot runner systems driven by performance for the processing of all injection moldable plastic materials. INCOE is a global company that is 100% family owned and operated with a commitment to supporting the plastics industry, innovating new products and providing top-level customer service. An experienced team of professionals in over 45 countries remains committed to quality, partnership and bringing application-specific expertise to the customer.

Manufacturing 97

Manufacturing 97

Robotics Automation News

JUNE 14, 2023

As concerns over environmental sustainability continue to grow, many industries are looking towards the future and finding ways to reduce their impact on the planet. One such industry is golf, where concerns over water usage, chemical pesticides, and land use have led to a renewed focus on sustainability.

98

98

Advertisement

Next-gen manufacturers are redesigning factories to enable agility at every stage of production. From more timely communication between engineers and technicians to technologies that empower real-time collaboration, they’re getting ahead by making iterations and improvements during a build, across the production line at scale. This level of flexibility means they can develop more quickly than their legacy counterparts.

Manufacturing

E&T

JUNE 14, 2023

While it’s tempting to think that leading economists, senior academics and best-selling authors are not prone to sweeping elevator pitches, Simon Johnson – who is all three – is keen to describe his latest book as “the thousand-year backstory for ChatGPT”. Johnson is one half of the authorship duo (his co-author is the equally well-credentialled Daron Acemoglu) that has just delivered ‘Power and Progress’.

Automation 97

Automation Form Manufacturing 97

Robotics Automation News

JUNE 14, 2023

The success of mold manufacturing heavily relies on the material selection process. Choosing the right material for injection molding tools is critical as it can significantly impact the quality, durability, and cost-effectiveness of the final product.

Manufacturing 98

Manufacturing 98

E&T

JUNE 14, 2023

According to the Offshore Wind Industry Council (OWIC), over 100,000 people will be needed by 2030 to maintain and run offshore wind infrastructure as installations ramp up. The report said the industry will need to be able to attract and retain an average of 10,000 people per year. The UK’s existing offshore wind workforce has increased to over 32,000 – up 4 per cent compared to the end of 2021.

97

97

Robotics Automation News

JUNE 14, 2023

Medical plastic injection molding companies play a critical role in supplying the healthcare industry with reliable and safe medical devices and equipment. However, the industry faces various challenges that require strategic solutions for the continuous production of high-quality medical products.

Continuous Production 98

Continuous Production 98

Advertisement

In the rapidly-evolving world of embedded analytics and business intelligence, one important question has emerged at the forefront: How can you leverage artificial intelligence (AI) to enhance your application’s analytics capabilities? Imagine having an AI tool that answers your user’s questions with a deep understanding of the context in their business and applications, nuances of their industry, and unique challenges they face.

Artificial Intelligence